Used Multiple Rip for sale (15,198)

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence Kfjdpfx Aocnxa Seanja large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: used, Year of construction: 1998, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, chain width: 450 mm, type of input current: three-phase, track width: 450 mm, working width: 870 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm Kodpfjxtabxsx Aanofa – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, Internal dimensions: 630 cm x 234 cm x 130 cm. = Further Information = Colour: Blue Cargo space dimensions: 630 x 234 x 130 cm Price: On request VAT/taxation: VAT deductible Type number: HARDOX CONTAINER / MULTI FLAPS = Company Information = Kfsdpfx Aaoxz Dyzsnja ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Kedpfx Ajiu Urpoanofa Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: used, Year of construction: 1999, with spiked chains feed gearbox newly mounted in 2025 incl. approx. 15 carbide-tipped blades 5 pressure rollers used, in good condition Manufacturer: Raimann Type: KS 310 Year of manufacture: 1999 Machine no.: 26085 CE type-certified GS wood dust tested Motor: 30 kW Chain width: 340 mm Max. cutting width: approx. 650 mm Cutting height: approx. 120 / 105 mm with roller Kerf: approx. 650 mm Feed speed max.: 8 - 35 m/min / 1.5 kW Electrically adjustable Saw blade diameter min. 250 mm - max. 360 mm / 80 mm bore Shaft diameter: 65 mm, 3900 rpm Min. workpiece length: 450 mm with roller Spiked chains Extraction port: D 180 mm Space requirement approx. 2100 mm x 1400 mm x 1600 mm Weight approx. 2200 kg Nominal current 50/41 A max Located at 97447 Gerolzhofen, free loaded, unpacked Sold as is, as inspected without warranty or guarantee Kfjdpfoxuv Rlex Aanea

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min Kedpfx Aetvpfmoanofa MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: new, Year of construction: 2025, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Kedpfx Asih Dxlsanjfa Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2001, condition: used, Multiple crosscut saw with 4 saws Kfodpeiw El Usfx Aansa

Year of construction: 2025, condition: new, functionality: fully functional, • 260 mm cutting height • 750 mm cutting width • 5 – 30 m/min infinitely variable feed control • 1 x 75 KW saw motor for the lower shaft • 1 x 75 KW saw motor for the upper shaft • 4 KW SEW feed gear motor • 70 mm Ø saw shafts • Electric height adjustment of the rollers • 7 driven transport rollers • 2 driven pressure rollers • 400 mm saw blade diameter • Paint finish in RAL colour 6011 • Complete electrical system including control cabinet and control panel • Working height + 850 mm Ksdpfx Aaexqlt Uonofa • Weight 5,500 kg • CE-compliant design

Condition: good (used), Year of construction: 2001, I sell the multiple boring machine DETTEL M2232 22-spindle x distance 32mm Kfedpfeq H H Najx Aanea Turning head 0-90° screw-quick-change bushes included. Type Vitap. 2 pcs. side fences included Good condition. Available immediately.

Condition: used, Year of construction: 1980, used, in top condition Make: Raimann Model: K 23 Year of manufacture: 1980 Chain width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure bar / with pressure bar 110 mm Feed speed max. 8 - 35 m/min steplessly adjustable Saw blade diameter: 360 mm x 80 – bushing Shaft diameter: 65 mm Minimum workpiece length: 290/750 mm Extraction connection D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Kodpsxuv Nujfx Aansfa Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-is condition, as inspected No guarantee or warranty

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm Kodpfxoq U S Die Aansfa - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: used, Year of construction: 2004, Ref:10906 . 2004 Herzog + Heymann M7 Multiple Folder. A very versatile folding machine in excellent condition. It is not only a high speed automatic B1 buckle folder for standard section and leaflet work, but also a specialist folder capable of folding maps, multiple roll folding and concertina folding. Comprising; MBO R700 'Perfection Dualfeed' round pile continuous feeder ‘Vacu-Infeed’ for mark free and smooth sheet running ‘Vacu-Alignment’ adjustable vacuum in tape roller infeed of register table Features include:- • MBO MCC Total and batch counter Ksdpfx Aew Eu Igeansfa • Stainless steel buckle plates • Sound hoods • Frequency controlled A.C. drive motor & dual action compressor • MBO ASP 66-2 ME Presser/marker delivery unit • Complete with spares, tools & manuals. Folding sequence: 1st buckle unit - 72cm with 16 plates, perforating/scoring shafts Specification: Sheet size, Max: 72 x 104 cm (continuous feeder) Min: 15 x 20 cm Minimum fold length: 4.2 cm Speed range : 40 - 160 m/min.

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm Ksdpfx Aajxa Evzonsfa - Min. length of processed material: 2 m

Condition: good (used), Year of construction: 1996, functionality: fully functional, Roller conveyor with rip saw and outfeed table Kodpfx Aeuvdfmoanjfa motorized roller conveyor6m rip saw, pneumatic control, 400mm saw blade Outfeed roller conveyor with pneumatic side pushers, 10m Feed table 5 x 10m with cross conveyor

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Kedpfjtmwnisx Aansfa Available immediately.

Year of construction: 2013, condition: excellent (used), HewSaw Veisto CRS 250, rip saw in good condition, complete with control cabinet Ksdpfx Aaexbic Ionsfa

Year of construction: 2024, condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter Kfjdpfx Aebu Rqpeanoa - 5000 Kg weight

Year of construction: 1982, condition: used, In Good Condition Kedpjdq Ug Iofx Aanjfa

Condition: new, Year of construction: 2025, feed rate X-axis: 30 m/min, • Machine-specific wood diameter, possible diameter range 40 to 200 mm • Feed speed up to 30 m/min • 3 infeed rollers for centering the log • 2 outfeed rollers Ksdpfx Aswzwifsansfa • 1 saw blade • Saw drive motor 7.5 kW • Feed motor 1.5 kW

Condition: new, Spindle diameter 90 mm Diameter of sawblades 255 mm Cutting width 1600 mm Cutting height 0-50 mm Motor power 37 kW Speed 2800 r/min Feed speed 0-15 m/min. Feeding motor 3 kW Delivery term: ~ 3 months. Kfodpfsd Nluwox Aanja

Condition: used, Year of construction: 1999, machine/vehicle number: 228, SECOND-HAND OSCILLATING HF MULTIPLE MORTISER BACCI MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - RPM Spindles (selectable motor by motor) RPM 6000/12000 - Max inclinations of slots > 20° - Inclinations from and towards the outside -7° + 30° - Max C/C distance of spindles mm. 1280 - SN 228 Kedpfewrd A Tsx Aanofa - CE rules (year 1999)

Year of construction: 2024, condition: new, max. cutting length 3.000-8.000 mm min. cutting length 500 mm Kfedoxfzljpfx Aanja max. cutting height 80 - 140 mm stepless feed 10-30 m/min. saw motor power 4,0 - 7,5 kW feed motor 1.5 kW number of saw supports 2 - 6 weight 1.000 - 2.500 kg

Year of construction: 1995, condition: used, In Good Condition Kfsdpfx Aaodq Uf Hjnja

Year of construction: 2000, condition: used, machine/vehicle number: 001119, SECOND-HAND MULTIPLE HORIZONTAL AND VERTICAL DRILLING MACHINE COMEC MOD. FOV/3+CA - CE RULES - N. 2 horizontal boring units - N. 1 Vertical boring unit - Automatic loader - Volt. 415/50 Kjdoqmi Epopfx Aansfa - S/N 001119 - Year 2000