Used Nibbling for sale (99)

Year of construction: 2003, condition: good (used), Boschert EL500CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel x- 1000 mm (repositioning up to 9999 mm) y- 580 mm punching arm throat: 730 mm Tooling system Trumpf Gr1-3(105mm) Labod 32040 graphic control / workshop programmable Max. Sheet thickness: 6 mm(jaw opening) Max. Lifting height: 90 mm up and down infinitely programmable. Punching slug extraction Ltsdehr A Nvepfx Aansa Table width left + right: 1100 mm each Table depth: 810 mm table height: 900 mm total width: 2582 mm total depth: 2800 mm total height: 2080 mm Driving power: 20 kVA Machine weight: 8.300 kg Hydraulic filling: 80 l Color: reseda green RAL6011/light gray RAL7035 Machine year 2003 Very well maintained condition with a lot of accessories Tool cabinet

Condition: good (used), Year of construction: 1990, functionality: fully functional, punching force: 22 t, sheet thickness steel (max.): 6 mm, Murata Weidemann C 2000 Ledpfxstulrfe Aanota

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine Lodjwduukepfx Aanjta • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device • Spray lubrication for punches • Punch slug extraction Safety • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense.

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL Ltjdercb Hqopfx Aanoa

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Ltsdpfxorfww Ne Aanja

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x2000 Rota-Index TRUMPF quick-change tool system Lodpjwdmwqsfx Aaneta Station 1: Rotation with index option for Boschert Multitool Max. punching diameter 105 mm. Tool continuously rotatable. Station 2: Max. punching diameter 105 mm with Boschert Multitool Revotool insert option. Incl. 8-way tool holder. Punching force: Yes, 280 kN (28 tons). Travel range x- 2050 mm (repositioning up to 9999 mm). Y- 1580 mm. Punching arm reach: 1750 mm. Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool. Labod 32060 graphic control system / workshop programmable. Max. sheet thickness: 6 mm (clamp opening). Max. stroke height: 90 mm, continuously programmable up and down. Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017/Light gray RAL7035 Machine built in 2006 Ball transfer table Slug extraction system Fast hydraulics Very well-maintained condition With accessories

Condition: good (used), Year of construction: 1998, Boschert TRI1500 x 2500 CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel x- 2500 mm (repositioning up to 9999 mm) y- 1560 mm Punching arm throat: 1850 mm 3 punching heads tool system Trumpf Gr1-3(105mm) head 1-3 Control Labod 32040 graphic control / workshop programmable Max. Sheet thickness: 6 mm(clamp opening)/10 mm Lifting height: 40 mm up and down steplessly adjustable. Table width left + right: 2600 mm each Table depth: 1800 mm table height: 900 mm total width: 5282 mm total depth: 4500 mm total height: 2080 mm Driving power: 20 kVA Machine weight: 17.800 kg Hydraulic filling: 80 l Color: Blue /Light gray RAL7035 Machine year 1998 Ltjdpjizctcofx Aanja good condition / overhauled., New safety light barriers New memory module with USB/SD card and LAN with accessories

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Main Drive Punching force 200 Kn Dimensions Machine Length 4165 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1270 mm Ltedpfx Asx E Ecueansa This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. Application Types Punching

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 178400 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm Ltjdpfxjwirpco Aanea 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg SPECIAL CAMPAIGN UNTIL 23.12.2025 Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 40126, punching force: 20 t, sheet thickness (max.): 12 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 310 mm, overall weight: 2,500 kg, input voltage: 400 V, Edelstanztec Micromat 203 for sale with tool sets Technical data: Punching force: 200 kN Maximum punching thickness: up to 12 mm (machine operated with thicknesses from 0.5 mm to 4 mm) Processing length: x – 760 mm, width y – 310 mm Processing with repositioning: x – 1500 mm, y – 600 mm Ljdsx I Dt Djpfx Aanota Equipped with a turret tool changer system for 6 tools or can be used with mono tools.

Condition: good (used), Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch Lsdpfsb A Rmbjx Aanota -Stamp holder: Ø 22 mm -Die holder: Ø 40 mm -Dimensions: 310/400/H50 mm -Weight: 26 kg

Condition: ready for operation (used), Trumpf TruPunch 3000 Stanzmachine, Punching Machine, 1st owner Ledpfx Aajx I Iwgsnota

Condition: used, Year of construction: 1999, Working area 4000 x 1500 mm Max pressure 30 ton No. of stations in turret 21 pcs. No. of indexing tool stations 10 pcs. Max. material thickness 8 mm Max. sheet size 3061 x 1528 m Max. punch dia. 89 mm Control: Siemens Sinumeric 840 D Equipped with: Ledsxyiw Aepfx Aansta 4 threading stations Automatic loading/unloading system

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 mm Measurements height 2263 mm Machine weight 14500 kg Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Ltsdpfsx D Dn Dsx Aanja Application Types Punching

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm Ltjdpfowirkgjx Aanja 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Ledpfowp Aa Sex Aanjta

Condition: good (used), Brush deburring machine, sheet metal deburring machine, deburring machine -Deburring machine for: stamped, laser and nibbling parts Ltedpsd Nq A Uofx Aanea -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW -Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Ljdpfefmqq Eex Aaneta Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Ltodpfx Aox D Htpsanja Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 6500 kg Main Drive Punching force 300 Kn Lodpfx Aox D Ia Rjanota Movement X-Axis Movement 1300 mm This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Ledox D Dkljpfx Aaneta Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Main Drive Number of axis 2 Movement Ltedpfxjx Enlxo Aanoa X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 4900 Measurements depth 6190 mm Measurements height 2450 mm Machine weight 8400 kg Control Unit Brand FANUC Model FANUC 16I-PB Main Drive Main motor power 12.5 kW Movement X-Axis Movement 3090 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1540 mm Y-Axis Rapid Traverse 65 m/min Table Outer length 1500 mm Outer width 3000 mm Additional Equipment Integrated Auto-Index system Automatic tool change system with 15 stations Waste extraction system at the die Pedal for opening/closing sheet clamps Pedal for single punching operation Automatic collision prevention for tilting parts and cutouts Interactive CAD with export function Import of CAD drawings in common formats Interactive nesting (freehand, bump nesting) Automatic positioning of special tools This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Ltsdpfex D Nk Rox Aansa Application Types Punching

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Table Table load 160 kg Ltodpfxjx D Hpqo Aanea Control Unit Brand FANUC Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements width 4100 Measurements depth 5700 Measurements height 2070 Machine weight 8000 Main Drive Maximum sheet thickness 6.4 mm Movement X-Axis Movement 1270 Y-Axis Movement 1270 - 2020 Workpiece Workpiece weight 75 kg This 3-axis TRUMPF TC2000R was manufactured in 1999, featuring a robust 1270 mm X and Y-axis travel, expandable to 2020 mm for larger sheets. It boasts a 22-ton punching capacity and a high-speed punching rate of up to 900 strokes/min. The machine includes a 9-station linear magazine with an automatic turret-style changer and full C-axis rotation. Ideal for high precision CNC punching. Contact us for more information about this machine. Lodpfxex D Rg Hj Aanota Application Types Punching