Used Oil Extractor for sale (7,193)

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) Ledpec Rt D Njfx Ahtohk 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow oil cooler D20V D30V 2 flow oil coolers - coolant system for machine cooling - individual sale possible. Ledpfeg U H E Sex Ahtohk Two stand-alone flow oil coolers / circulation coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow oil cooler, type D 20 V, Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow oil cooler D 30 V Wöhr flow oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. Subject to typographical errors and omissions in all technical data. We only sell to countries within the European Community.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Lsdpfx Ahjzmd Uiotjhk Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Depth: 550 mm Height: 720 mm Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Lsdpozgiakofx Ahtehk Model SARA UC 2 SD Serie II Technical Specifications Year of Manufacture: 2002 Serial Number: 02-6-338 Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: ready for operation (used), Liquid chiller, Oil chiller, Neslab, used machine Manufacturer : Neslab Type : CFT300 Lodpjyvfrcofx Ahtshk Overall dimensions : 640 x 900 x 1090 mm Electrical data : 400 V, 50 Hz, 10 A Refrigerant : R22 Cooling capacity : 10.6 kW Adjustable temperature range : 5–35 °C Water flow rate : 75.7 l/min

Condition: used, Liquid Cooler, Oil Cooler, Etscheid IK-V7, Used Machine Manufacturer: Etscheid Type: IK-V7 Cooling capacity: 1.8 COP Lhsdpfxeypuc Rj Ahtsk Refrigerant: R134a Electrical data: 400 V; 4.7 kW; 6.5 A Operating pressure: 20 bar Year of manufacture: 2002 Overall dimensions: Length: 900 mm Width: 900 mm Height: 1350 mm Weight: 205 kg

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Lodpfxsx U Amio Ahtohk Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm Lhjdpfoyn Rmiox Ahtsk

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Lhedpfx Asw Tt Tvehtjk Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Lhsdjxh Ammopfx Ahtsk Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Overall Dimensions: Width: 1600 mm Ledpexa Hldsfx Ahtshk Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Lhodpfx Ahjv Ta D Djtek Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 7.5 kW (10.20 HP), suction capacity: 5,100 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total width: 900 mm, Equipment: CE marking, We offer this used SPÄNEX SMU 6000.1 with a rotary valve airlock, mobile dust extraction system/dust collector, manufactured in 2014. Manufacturer: SPÄNEX Model: SMU 6000.1 with rotary valve airlock Year of manufacture: 2014 Condition: used Machine type: Mobile dust extraction system/dust collector If you have any questions or require further information, please feel free to send us a message or call us. Ledszhcr Aspfx Ahtshk

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. Lhsdpfx Ahed Sninjtjk The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Year of construction: 2018, condition: new, Condensate treatment: Lodedmqy Iepfx Ahtshk new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Oil drain connection: DN 40 Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Lhedpfxezcg Hzj Ahtsk Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger -Oil cooler: Heat exchanger, without fan Lhjdpfx Ahjzk Etbetsk -Type: unfortunately no type designation -Pressure: max. 20 bar -Temperature: max. 120 °C -Dimensions: 270/130/H260 mm -Weight: 4.4 kg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, INORON CLINER C 351 Mobile washing station with oil separator and high-pressure cleaner Lhsdpfxszq T Aqe Ahtok Completely self-sufficient, no permit required, suitable for oil- and emulsion-containing tools or products. Like new condition; can be inspected on-site. For further information, please contact me.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Lodpfxohkztwo Ahtjhk Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 6,000 m³/h Ledpfx Ahecdrzdotshk Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Lhedecdr Enjpfx Ahtsk Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h Lsdebpg Ncspfx Ahtjhk • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Ljdebuvbrspfx Ahtohk Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from warehouse 54634 Bitburg Immediately available Lhsdpfx Ahjbqachotek Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications POWER UNIT 160 P: • Intake nozzle diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. volume flow: 2000 m³/h • Rated volume flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² • Filter cleaning: Compressed air cleaning • Collection container (rolling container): 241 liters • Dimensions (L x W x H): 1684 x 830 x 2050 Lhjdpfx Ajbpg Itjhtsk • Weight: 288 kg • Design / Operating side, selectable: right / left Location: In stock at warehouse 54634 Bitburg Excellent price for the showroom model.