Used Oil Extractor for sale (7,353)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Oil hermetical distribution transformer, producer - ELIN, made in Czech republic, 630kVA, 10/0,42kV, Dyn1, ONAN, uk=4%, year of production 2006, functional, rutine test report, design documentation, available 2 pcs. Bwedpfx Acjx Nxtusfjw

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO Bodpfoxxb Evjx Acfeww MODEL: ZT18 SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 PRESSURE (bar): 8.6

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Bedpfxeuyh R Ao Acfoww Depth (mm): 600/800

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Bodoyibg Topfx Acfeww Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2004, For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model L7T-1965kw. 1. Burner type: L7T Bwjdoy Ut Dxjpfx Acfow Output: 320 - 1965 kW Heating oil: 27-165 kg/h Design: D Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006 Bwodpfxjzaby Rj Acfew

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman dust extraction system / silo dust collector with control unit and compressed air treatment Condition: very good, used for only 2 years from commissioning in 2023 to 2025, then dismantled due to factory closure. Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems. Design: compact steel construction with integrated filter module. Filter cleaning: compressed air cleaning. Mounting type: roof mounting on silo. Application: industrial dust extraction, bulk solids handling, environmental technology. Filter type: cassette dust collector Type: MEP-2-6 Year of manufacture: 2023 Fan manufacturer: Nederman Type: FMZ 620 Year of manufacture: 2023 Power: 3 kW EX-protected Control unit manufacturer: Nederman Type: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Bwodpfsyxvpfjx Acfow Year of manufacture: 2023 Serial number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed air treatment: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Electrical components: ABB control / connection housing Design: dust extraction system for silo applications with integrated filter unit and fan. Accessories / Scope of supply: Electrical control cabinet with control unit Compressed air treatment unit with pressure gauge Pressure vessel for pulse cleaning Fan with motor Pipe connection with weather protection grille Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Chip capacity: 2 x 250 liters Bwjdpfjzcgbxsx Acfjw Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Bsdpfx Acjv Ig Rmofoww

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Bwodpfx Acjv Ta D Dofjw Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: excellent (used), Servatechnik extraction Bsdpjx Nbnnefx Acfeww

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. Bwedpfxew Hxgve Acfjw This is not included in the offer price.

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Bodpfx Acoy Dvguefoww Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Condition: excellent (used), Year of construction: 2002, operating hours: 46,357 h, functionality: fully functional, Oil-free screw compressor Atlas Copco GA75VSDFF Inverter and dryer integrated. 160 kW 7.5 bar 27.90 m3/min Bwodeyz R U Iepfx Acfsw Year of manufacture: 2002 Operating hours: 46,357

Condition: excellent (used), 1.6 kW motor, 2,300 m³/h, 16 cm inlet Bjdpfxjy Aagcj Acfeww

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg In good condition. Bsdpfx Acjy Ty Saefsww

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: Bedpfxsy Sf Azo Acfoww • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Bwsdpfx Acszqc E Uefsw Weight: approx. 50 kg Condition: good, second-hand

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Depth: 500 mm Weight: approx. 20 kg Bedpfxszqc Uvs Acfsww Condition: good, second-hand

Condition: excellent (used), POLYCITRUS FRATELLI INDELICATO ZX2 Industrial Extractor – Stainless Steel POLYCITRUS FRATELLI INDELICATO ZX2 industrial extractor, designed for the continuous extraction and separation of juice and pulp in the industrial processing of citrus fruits and other compatible fruits. The equipment features a large upper feed hopper and a horizontal processing chamber, where the product undergoes a mechanical action that allows for the extraction of the usable fraction and its separation from peels, seeds, fibers, and other solid residues, depending on the product and the installed configuration. Its construction, primarily in stainless steel, and its robust design allow it to be incorporated into industrial lines for the production of juices, pulps, and fruit derivatives. MAIN FEATURES -Manufacturer: FRATELLI INDELICATO -Designation: POLYCITRUS -Model: ZX2 -Type: Industrial fruit / citrus extractor -Continuous operation -Upper feed hopper -Horizontal extraction chamber -Mechanical extraction and separation system -Separation of liquid / pulpy fraction and solid residues -Differentiated discharges according to configuration -Driven by an electric motor -Construction primarily in stainless steel -Enclosure of the moving elements -Robust industrial structure -Access to the processing chamber for cleaning and maintenance -Suitable for integration into fruit processing lines PROCESS The fruit or raw material, previously prepared, is fed through the upper hopper and passes into the extraction chamber. Inside, the mechanical system exerts the necessary action to break, press, and/or separate the product, allowing the recovery of juice, pulp, or a combination of both, depending on the product being processed and the internal elements installed. During the process, undesired fractions, such as peels, seeds, and fibrous material, are separated and evacuated independently of the usable product. The resulting product can then be sent to: Refiners / finishers Screens Buffer tanks Centrifuges Homogenizers Pasteurizers Sterilizers Evaporators / concentrators Aseptic tanks Bwjdpfx Ajzxwyvocfsw Filling lines APPLICATIONS Particularly suitable for fruit processing industries, juice, pulp, fruit base, and citrus derivative manufacturers. Depending on the installed extraction elements and the prior preparation of the raw material, it can be used in different extraction, separation, and recovery processes for the usable fraction of the fruit. The POLYCITRUS FRATELLI INDELICATO ZX2 provides a robust solution for incorporating a continuous mechanical extraction stage into industrial fruit processing lines. Machine available for inspection. Additional technical information, production capacity, internal configuration, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Bwedpfx Ajzt Ruvscfjw

Condition: new, Year of construction: 2024, Manufacturer: Green Transfo Type: Minera MP Year of construction: 2024, unused Available units: 9 units Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV The transformers are being sold due to an incorrect order. It was subsequently discovered that 33 kV transformers were required – the offered models only provide 30 kV each. Therefore, they are now for sale. Bwjdpfx Acevx Tmisfew Condition: Unused, fully functional, technically perfect

Condition: good (used), We offer you steel tanks for storing almost all common liquid media. We have all available sizes, from 1,000 liters to 100,000 liters, constantly in stock. No matter how you want your tank to be equipped, we will implement your wishes and comply with official regulations at fair prices. Bjdpfxogx E Uhe Acfjww Whether it's an inner lining, 2-component epoxy coating, exterior paint, installation or modification of fittings, DEKRA inspection, loading, and transport – we are the right partner for you.

Condition: good (used), Year of construction: 2012, Centrifugal fan, dust extractor, fan, suction, dust blower, blower -Motor: Ziehl-Abegg ECblue .1R -Speed: 1580 rpm -Connection: input Ø 240 mm -Connection: output Ø 450 mm Bwjdpofiqrfjfx Acfjw -Dimensions: 995/815/H1060 mm -Weight: 148 kg

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 4,60,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Bwodpfsq Nmw Isx Acfow