Used Oil Painting On Canvas for sale (18,218)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Lasdjyg H Dhspfx Alysh 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer. Lajdez D Evyopfx Alyoh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Lajdsz Ix Azjpfx Alyjh Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Lasdpfx Asz R Rlvolysh Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. The liquid collects at the bottom of the filter and can be reused for operation. These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system and its installation situation before dismantling and to document it for a later reinstallation. Technical data and equipment: • Large-area filtered supply air ceiling approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system as it currently exists on-site Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Its previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still assembled system is highly recommended. Sales and dismantling conditions: Laodpfez Ikyrjx Alyjh Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are to be carried out entirely by the buyer at his own cost and responsibility. The buyer must organize the necessary skilled personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on the available documentation, nameplates, and the current condition of the system. Information provided without guarantee. The condition and scope determined during inspection shall be decisive. Selling price: 25,000.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: new, Oil meter, conoil. Lasdpfx Aoy Ud Nfjlysh

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. Laodpfx Aozmd Uijlyeh The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2006, condition: used, machine/vehicle number: AT99, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied dismantled for rapid transport and reinstallationApplication: Pre-clarification and separation prior to storage, transfer, and filling in beverage production and industrial packaging workflowsAdvanced Automation & Control SystemsThe unit is delivered complete with an electrical panel that provides centralized control for start/stop sequences, motor protection, and process interlocks. The panel architecture supports safe operation, facilitating integration with plant-level controls, tank level management, and downstream fillers. Clear labeling and organized wiring simplify commissioning and maintenance, while standard protections help safeguard operators and equipment during routine use.Production Line Integration CapabilitiesEngineered for straightforward line connectivity, the decanter centrifuge interfaces easily with upstream feed systems and downstream buffer tanks or clarifiers. Its continuous discharge design helps stabilize flows to filling and packaging equipment, improving overall line efficiency. It can operate as a standalone separation module or be incorporated inline with CIP-ready manifolds, transfer pumps, and automated valves. Flow and residence time can be tuned via feed rate adjustments to accommodate a range of viscosity profiles and solids loads encountered in beverage production and related industrial packaging processes.Machine Condition & Maintenance HistoryThe machine is already dismantled, allowing efficient loading, transport, and rapid placement at the installation site. Mechanical and electrical subsystems are organized for reassembly, with the supplied electrical panel simplifying recommissioning. Overall, it represents a reliable second hand asset ready to be integrated into an existing used bottling line or a new process area following standard installation and start-up procedures.Operational Performance & VersatilityThis decanter centrifuge is designed to deliver stable separation performance across continuous operation, supporting clarification targets that improve downstream filtration and filling quality. The included malaxer enhances upstream mixing and conditioning, optimizing separation efficiency and throughput. Its robust industrial design suits extended duty cycles, while continuous solids dischar... Lsdpo Adt Dxjfx Alyeah

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Lods Adrtxepfx Alyeah Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Condition: used, machine/vehicle number: LC610, Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actuation and controlDischarge control: electronic management on crusher/pump groupManufacturer: Vitone engineeringAdvanced Automation & Control SystemsThe line leverages pneumatic actuation for reliable, low-maintenance operation and features electronic discharge management on the crusher and gear pump group for precise process control. Variable speed on the crusher enables optimal paste preparation across different olive varieties and crop conditions. Modular sections facilitate line balancing and fine adjustments during peak harvest periods.Electronic discharge management for consistent flowVariable-speed crushing for paste optimizationPneumatic controls for actuators and key mechanismsModular sections to match upstream reception and downstream filtrationProduction Line Integration CapabilitiesDesigned for seamless integration within an olive oil extraction plant, the system connects upstream fruit handling with malaxing, separation, and finishing. Downstream, it interfaces effectively with used bottling line equipment and industrial packaging solutions for edible oil, enabling a smooth transition from extraction to filling, capping, and labeling where required.Inline operation across crushing, malaxing, centrifugation, and filtrationEasy tie-in to downstream oil bottling and labeling systemsCapacity scalable by upgrading pump sectionsSorter with belts and hoppers supports steady, uniform feedMachine Condition & Maintenance HistoryThe plant is kept in regular working order with scheduled annual maintenance. It operates every harvest season, ensuring components remain exercised and service-ready. The consistent upkeep reflects a practical, second hand asset that remains fully functional and dependable for ongoing production.Operational status: in production during harvest seasonsMaintenance: routine annual service performedCondition: ready to support continuous-cycle extractionOperational Performance & Versatility Lasds Adt D Espfx Alysh

Year of construction: 2000, condition: used, functionality: fully functional, We offer these used USF sandblasting and painting booths, model 2 sandblasting booths and 1 painting booth, manufactured in the year 2000. Ljdsz I T Nvjpfx Alyeah Manufacturer: USF Model: 2 sandblasting booths and 1 painting booth, 12 meters x 5 meters x 5 meters Year of manufacture: 2000 Condition: Used Category ID: 227 Type: 2 sandblasting booths and 1 painting booth, with dimensions of 12 meters long, 5 meters wide, and 5 meters high. The entire unit is in working order and comes with operating accessories. It is available for dismantling on-site (in the Var department, 83) from mid-December. Dismantling and removal are the responsibility of the buyer. If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Nominal flow rate: 180 [L/min] Laodoz Hvv Njpfx Alyoh Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Ljdpfxoz D Ifqs Alyjah Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Ljdpfx Als Adt T Toysah Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry.

Condition: used, Universal Temperature Control Unit Oil Advanced with electric heating and connections for external cooling. Laodpfx Aj Aarfaslyeh Oil temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE Type Advanced Oil D2-300-18-116 Mfg. No.: 151777 Year of manufacture: 2015 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 8 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating power 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply and return DN25 - G 1" Cooling water supply G 1/2" Cooling water return G 1/2" Connection power 23.5 kVA Control SCT standard - 7" touch display Mains connection 400 volts, 50 Hz, 32.7 amps - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - External cooling unit or external cooling circuit is required for cooling (cooling is achieved via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1125 x 395 x 1210 mm Weight 226 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. Lajdpsz Dauksfx Alyeh During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Lsdpfxez Ix R Es Alyoah Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Lasdpjvmtw Rjfx Alyjh Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking Ljdpfsz Nd I Tjx Alysah

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Lasdsz D E Icopfx Alysh

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. Ledpjz Hbm Tsfx Alyeah The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: lighting, For sale: a BUMEX brand dry paint booth, model TUXXYY, manufactured in 2019 and in perfect working order. This booth is designed for the application of lacquers and paints, both water-based and solvent-based, and complies with all European safety and quality regulations. It is the ideal solution for automotive workshops, metalworking shops, or any industry requiring a professional and safe finish. It includes complete technical documentation (installation, safety, and maintenance manual) and a delivery protocol. Key technical features: - Brand: BUMEX (F.H.U.) - Model: TUXXYY (Dry paint booth) - Year of manufacture: 2019 - Total power: 2.0 - 3.5 kW - Supply voltage: 230/400 V (50 Hz) – Single-phase and three-phase - Protection rating: IP-65 (IP-56 in control cabinet) - Filtration system: Double-stage with Andrea paper filter and G4 fiber filter (PaintStop). - Extraction fan: Included for removing excess paint. - Construction: Galvanized sheet metal (stainless steel option available). - Regulatory compliance: ISO 9001:2015 certified, CE marking. - Applicable standards: PN-EN 12215, PN-EN 60204-1, PN-EN 1127-1 (safety in explosive atmospheres). Condition and maintenance: - Condition: Excellent condition. Operation verified. - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter and electrical connection inspection). - Includes: Original documentation (Instruction Manual, Delivery Protocol), filters Lasdpfx Alsz Riuzjyjh Important notes (according to the manual): - Requires installation in a location with adequate ventilation, a minimum temperature of +10°C, and effective grounding. - Designed for use in Zone 2 (potentially explosive atmospheres), complying with the required safety measures.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. Lajdpfx Aoz Azx Rolyjh 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: good (used), Painting unit, paint sprayer – GRACO MERKUR + Graco G40 spray gun. Laedpfx Alsz Sb Nnoyeh

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Laedpfoz Syxaox Alyjh Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A