Used Okuma Lb 15 for sale (225)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Ibedpfx Aiozghc Doyjb Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank Ibjdpoyluvijfx Aiyeb

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped Ibjdpfx Aiey Rrwvjyob • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection Iedpozx D Dzefx Aiyobb • MOP-Tool • DNC-DT Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm Iodszair Ujpfx Aiysbb X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Iedpfx Aisyn Em Rjysbb Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, CNC Lathe Okuma Genos L300E-M incl. bar feeder Samsys M3000SL Control: OSP-P200L-R Year of manufacture: 2011 Internal machine number: 14 Ibjdpfsyli T Nsx Aiyob Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyor - 3-jaw chuck Ø 250 mm - Hainbuch collet chuck - Touch setter - Tailstock - Coolant pump - Bar feeder Samsys Multi 3000SL - Various accessories (see pictures)

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm Ibsdpfjzqtbgsx Aiyob DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Ibedpotdg Evjfx Aiyeb Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: excellent (used), Year of construction: 2001, OSP 100U control system Travel ranges X/Y/Z: 560 x 610 x 560 mm Spindle speed: 15,000 rpm Dual-pallet changer, 400 x 400 mm Ijdpozxh Spefx Aiyjbb Tool magazine for 60 tools, SK 40 Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,500 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 150, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Spindle: 30 bar through-spindle coolant • Control/Options: DNC/DT, MOP-Tool • Functions: Tool breakage control, Tool length offset Additional equipment • Renishaw MP10 probe Ibedpfx Aiszx Dypeyob • Robot interface type E • Mayfran MT10 chip conveyor

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Ibedpfxey Nb T Ds Aiyob • Table size: 1300 × 560 mm

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Ibodpev S Svvjfx Aiyeb

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with Gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Internal machine no.: 13 Max. turning length: 380 mm Turning diameter: 200 mm Ibsdeylkcrjpfx Aiyjb Swing over bed: 450 mm Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse (m/min): X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 for workpiece size Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Coolant pump Tool package

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2013. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. • Table size: 1500 × 660 mm Ijdsy Ndp Iopfx Aiyobb Technical Specification Taper Size BT 50

Condition: excellent (used), Year of construction: 2001, Turning length: 1,500 mm Turning diameter: 580 mm Travel range X-axis: 598 mm Travel range Y-axis: 230 mm Travel range Z-axis: 1,660 mm Max. turning diameter: 580 mm; turning length: 1,500 mm; control: OSP 7000 L; greatest pass round over bed: 610 mm; swing diameter over slide rest: 580 mm; main spindle: turning speed range - main spindle: 12 - 2,800 min/-1; spindle bearing diameter: 150 mm; spindle bore: 110 mm; spindle nose: JIS A2-11; power capacity - main spindle: 37 (30) kW; C-axis: 0.001°; axis stroke: x-axis: 598 mm; y-axis: 230 (+110 / -120) mm; z-axis: 1,660 mm; feeds: rapid traverse: C: 100 min/-1; cutting feed speed: X / Z / Y: 0.001 - 1,000 mm/rev; turret: type: H2 ATC; number of tool positions: 80 pos.; driven station: stepless; spindle speed - driven tool stations: 40 - 3,000 min-1; tool shank height: 25 mm; boring bar shank diameter: 50 mm; tailstock: diameter of quill: 120 mm; quill stroke: 170 mm; taper of center: MT 5; tool magazine: tool taper: MAS BT 50; max. tool diameter: 170 mm; max. tool length: 350 mm; max. tool weight: 20 kg. Ibsdpsztr Nnofx Aiyob Accessories: 70 pieces of tool holders.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) Iodpfxjy Dc Nie Aiysbb • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: Ibedpfxjyli Ako Aiysb 2 tool turrets, each with 16 stations (all stations driven) Touch setter IGF Chip conveyor Bar feeder, 3.00 m Main spindle collet chuck Sub spindle 3-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) Ibsdpfx Aey I Uu Esiyob • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option Iodpoyqx Rzofx Aiyebb 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment Isdpsyalp Nsfx Aiyjbb • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Ibjdpfeyia Tlox Aiyob Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP E-100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Technical Specification Ibedpszr Ny Uefx Aiyeb Taper Size BT 50 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling Iodozhnb Ajpfx Aiyobb • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Isdpfsyyk I Eex Aiyebb Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF