Used Okuma Lc 40 for sale (187)

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Bdsdswrr Nhopfx Addek Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Max. turning diameter 250 mm. Bdedpewn Dbnefx Addok Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Main Drive Bdjdpfxew Aikwe Addek Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2002, operating hours: 10,500 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: Okuma, controller model: U100, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB46 from 2002 few operating hours! Machine can be inspected under power. 32 tools BT40 Scraper conveyor Internal cooling 4th axis included Bdsdpewt Dqasfx Addjk

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Bodpfx Aew Np Uheddedk Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: good (used), Year of construction: 2006, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2006 - Includes bar magazine - Includes chip conveyor Bdedpfx Aev S Su Soddsk

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm Bsdpfxevmzc Uj Addsdk C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy Bdodpfjnt T Ausx Addek TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Spindle Speed (Motorized Tool Spindle): 5000 rpm Bdjdpswttuhofx Addjk This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Bsdswnqdiepfx Addsdk Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle - Tool probe Bdodsw Np S Hepfx Addok - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: good (used), Year of construction: 2007, Used OKUMA lathe Bsdpfov S Svvjx Addsdk - Model: LT200-M TwinStar - Year of manufacture 2007 - Includes loading robot and loading carousel - Includes chip conveyor - Coolant tank - Available immediately

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 YEAR2017 OSP-P300SA Bedswi Ezropfx Addsdk 15" chuck Max Machining dia:1050mm Length:3000mm

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS Bedpfx Adjnt T Afjdedk dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Condition: good (used), Year of construction: 2007, x-travel 762 mm y-travel 460 mm z-travel 460 mm Control OSP-P200M Speed range 50-15,000 rpm Rapid traverse X-axis 40 m Rapid traverse Y-axis 40 m Rapid traverse Z-axis 32 m Main drive motor 22 kW Bjdjvq Rhzjpfx Addedk Machine weight approx. 7200 kg Space requirement approx. 2850x2810x2750 mm Accessories/equipment: - Tool magazine 32 tools - Chip conveyor - Internal coolant supply - Standard filter system

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics This 2-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Application Types Turning Bsdpfx Ajw Rhaxeddjdk

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm Bdedpsk R Tp Uefx Addsk y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Control: OSP-P20L-R Swivel diameter over bed: 450 mm Swivel diameter over longitudinal slide: 350 mm Swivel diameter over cross slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Bodpfxevk Sqks Addsdk Tool turret: 12-way Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader BREUNING IRCO

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Tool changer Magazine positions: 20 EQUIPMENT Bedpowtrbaefx Addedk - Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109566, turning length: 480 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, spindle diameter: 100 mm, Machine with a large V12 turret for L- or M-sized tools and a hydraulic tailstock. TECHNICAL DETAILS Swivel diameter over bed: 530 mm Swivel diameter over longitudinal slide: 530 mm Swivel diameter over cross slide: 410 mm Number of controllable axes: 4 Turning length: 480 mm Turning diameter: 340 mm Speed: 4,500 rpm Spindle diameter: 100 mm Spindle Spindle diameter: 100 mm Spindle head type: JIS A2-6 Taper bore: Ø70 (2.75) x 1/10 mm Spindle bore: 62 mm Spindle speed: 38 - 4,500 rpm Longitudinal slide (Z-axis) Axis stroke: 500 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Axis travel: 280 mm [70 + 210] Feed: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Y-axis Axis travel: +70 to -50 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 10,000 mm/min Turret Type: V12 Number of tools: 12 (L or M tools) Tool size (external turning tools): 25 x 25 mm Bdsdpfov I Tkaox Addok Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200 °/min Tailstock & Motor Tailstock spindle diameter: 90 mm Tailstock spindle stroke: 120 mm Spindle drive motor: 15/11 kW (20 min/continuous operation) Longitudinal slide feed (Z-axis): 6 kW Cross slide feed (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Floor area: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS X-travel: 762 mm Y-travel: 460 mm Z-travel: 460 mm Control: OSP-P200M Tool magazine: 32 tools X-axis rapid traverse: 40 m/min Bsdsv Umt Uopfx Addjdk Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 32 m/min Speed range: 50 – 15,000 rpm Main drive motor: 22 kW MACHINE DETAILS Machine dimensions: approx. 2,850 × 2,810 × 2,750 mm Machine weight: approx. 7,200 kg EQUIPMENT - Chip conveyor - Internal coolant supply - Standard filter system

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand Okuma Model OSP-P200L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 3 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 2 Additional Equipment Renishaw tool probe USB, PCMCIA, and RS232 ports Chip conveyor (hinged belt type) Tool load monitoring and effort control Dual pedal for chuck and tailstock operation Fully equipped with static and live toolholders Bdsdpfx Aow Rhalsddek This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Bedpfx Adswxb Eredjdk Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer Bdjdpforfw Nhjx Addjk 20 magazine places chip conveyor

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 Bjdpfx Adjwfurxedsdk 30 Bar coolant Mayfran Consept 2000 This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Application Types Milling