Used Okuma Mx 45 for sale (216)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) Bdjdpfsy Nmi Dex Aqloc • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2013. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. Bdsdpfx Aey Ndp Ioqlsc • Table size: 1500 × 660 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Bdedpfxjy Nb T Do Aqloc • Table size: 1300 × 560 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Technical Specification Taper Size BT 40 Bdsdpoy Nb Nxefx Aqljc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Bdedpfoy I Uu Esx Aqloc Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2004, power: 37 kW (50.31 HP), travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, controller model: OSP-E100M, spindle speed (min.): 12,000 rpm, table height: 630 mm, Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 Bsdpsy N Afuefx Aqlodc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Bsdpfx Aqsy Axr Roledc

Condition: used, Year of construction: 2019, machine/vehicle number: 0711-101349, Equipment: chip conveyor, CNC vertical machining center Bodpfxjy Axf Dj Aqledc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Bdsdpoy Tvrvefx Aqlsc Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 70 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (min.): 70 rpm, rotational speed (max.): 3,800 rpm, total height: 1,800 mm, total length: 3,900 mm, total width: 1,800 mm, For sale is a robust and reliable Okuma CNC lathe, model LB15, with an integrated Okuma robot and automatic material feed. The machine is ideally suited for automated series production and impresses with its high reliability and stable design. The machine is in working condition and can be inspected under power by arrangement. Technical data: * CNC control: OSP 5000L-G CNC system (German) * Data transmission: RS232 * Tool turret: 12 positions * Spindle speed: 70–3800 rpm * Spindle power: 11 kW (30 min) / 7.5 kW continuous operation * Spindle bore: Ø 75 mm * X-axis travel: 400 mm * Z-axis travel: 500 mm * Feed rate XZ: 12,000 mm/min * Power supply: 3 × 400 V * Rated machine power: 21 kVA * Maximum load current: 36 A * Machine dimensions: approx. 2.9 m length approx. 3.9 m with chip conveyor approx. 1.8 m width approx. 1.72 m height * Machine weight: approx. 4,500 kg Bdodpfsy Tp D Sox Aqlec Equipment: * Integrated Okuma robot * Automatic part feeding * Ideal for series and automated turned parts * Stable and durable design Particularly interesting for: * Series production * Unmanned production * Automated turned parts * Production expansion or export Loading and transport can be arranged. Price: Negotiable plus VAT. Location: Germany If interested, please contact us. All information is non-binding, subject to prior sale. Machines/machine parts are sold without warranty claims and remain our property until full payment.

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Bsdpfx Aqey Hqv Nslodc Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Bedpfx Aqey Ed Ayolsdc Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Bsdpfx Aqjwcd Evolsdc Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2011, operating hours: 18,533 h, functionality: fully functional, machine/vehicle number: PA158, turning length: 450 mm, turning diameter: 300 mm, workpiece weight (max.): 9 kg, workpiece length (max.): 150 mm, workpiece diameter (max.): 225 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 450 mm Turning diameter: 300 mm Workpiece diameter max.: 225 mm Workpiece length max.: 150 mm Workpiece weight max.: 9 kg MACHINE DETAILS Operating hours: 18,533 h Rated voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Maximum power consumption: 22.9 kVA Bodpfxoy R Uy Hj Aqlodc Total current consumption: 34.8 A Motor current consumption max.: 72 A Short-circuit power data / current interruption at: 15 kA Dimensions & Weight Space requirement (L x W x H): approx. 2,550 x 2,150 x 2,100 mm Machine weight: approx. 4,900 kg Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 850 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 850 mm Turning diameter: 340 mm Spindle speed max.: 4,500 rpm Workpiece diameter max.: 300 mm Workpiece length max.: 850 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control system: Okuma OSP 7000L Power max.: 22 kW Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption max.: 30.1 kVA Total current consumption: 43.4 A Motor current consumption max.: 106 A Bdedpfx Aqsy R Uxieljc Current interruption at: 10 kA Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 0607.1447, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 530 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance Y-axis: 260 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,750 mm, total length: 3,000 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 5,000 kg, Equipment: documentation/manual, Control: OKUMA OSP5020L Bdodpfx Aqoy Stxqjloc 12 tools Automatic chip conveyor

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Bjdpjx D S Ekefx Aqlsdc Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Bsdoh D Anaspfx Aqljdc Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Bdjdoy H H Afspfx Aqlec Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm • Spindle bore approx. 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device Bodpey Ddtvsfx Aqlodc • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50 Bsdpjy Dc Niefx Aqlsdc

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment Bjdpfx Aqsy A I Stoljdc • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA Bdjdpjy A Ibhjfx Aqloc • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2512 Manufacturer: Okuma Model: LVT300-M Control Unit: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard / Software Language: International / Spanish Country of Origin: Japan Technical Specifications Capacity Swing over bed: Ø 280 mm Swing over Z-axis carriage: Ø 280 mm Swing over X-axis carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle Spindle bearing diameter: Ø 100 mm Spindle nose type: JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 40 – 4,000 rpm Spindle motor: 22/15 kW (20 min/continuous rating), VAC type X-Axis Travel: 210 mm + 845 mm (for workpiece loading) Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 60,000 mm/min Z-Axis Travel: 360 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 30,000 mm/min Turret Type: VDI 40 Number of tool stations: 12 (L or M) Tool Dimensions O.D. turning shank size: 25 x 25 mm I.D. boring bar shank diameter: Ø 40 mm Live Tooling / Driven Tools Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, infinitely variable Bedpfxjy Smz Eo Aqlodc Drive motor: 3.7/2.2 kW (15 min/continuous rating) C-Axis Controlled indexing angle: 360° (0.001° minimum increment) Rapid traverse rate: 200 rpm Dimensions and Weight Machine height: 2,500 mm Floor space footprint: 1,320 x 2,800 mm Machine weight: 5,600 kg Included Options EWAB palletized conveyor system (pallets not included) MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3-jaw / 210 mm) Tool presetter (TOUCH SETTER) TOOL LIFE MANAGEMENT function Rigid tapping DNC-T1

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Estimated value including equipment: 18,000 - 20,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in motion along the Z-axis and clamping via M-codes. * 12-station turret, all motorized. * C-axis. * Y-axis. * Integrated main spindle motor: 18.5 / 22 KW. * Motorized tool motor: 5.5 kW. * Starting motor torque: 620 N/M. * Integrated motor, no belts or gears. * Main spindle size: A2-8. * Tailstock with MT5 Morse taper. * Bar capacity: 75 mm. * Kitagawa B-210 chuck. * Prism-type guides on all axes. * Main spindle speed: 4,200 rpm. * Motorized tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Machinable diameter: 380 mm. * Machinable length: 1050 mm. * Oil cooler for the spindle. * Communication ports via USB, PCMCIA card, and RS 232. * Automatic torque and tool load control. * IGF OSP P200-L conversational programming system. * Automatic force control and tool consumption monitor. * Parameterized automatic tool collision prevention system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on the X and Z axes. * Turret indexing and change time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports via USB, PCMCIA card, and RS 232. Bodpfxoy T E Nws Aqledc * Double pedal for opening and closing the main chuck and tailstock. * Lateral chip conveyor, clamshell type. * Complete set of static tool holders for external and internal operations. * Complete set of motorized axial and radial tool holders. * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and operating manual. * Weight: 6,200 kg. * Machine is currently in operation. * Immediate delivery, subject to immediate sale.