Used Programming Instructions for sale (6,437)

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 Pgsdpfx Aaohyx Rke Djg -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg

Condition: excellent (used), Indramat (24474 internal) Mod.1X1X113-008 Pedpfsfg Uu Hjx Aa Dsgg Contr.TDM 1.2-50-300-W1

Condition: used, Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 Pjdsqh Ed Eopfx Aa Djgg -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device, handheld programmer Podpfx Aohyx N Aoa Dsgg -Manufacturer: Siemens, programming device Simatic PG 615 -Type: Simatic PG 615 6ES5 615-0UA11 -Dimensions: 300/150/H60 mm -Weight: 1.2 kg

Condition: used, Keyboard, control panel, industrial, PLC workstation, programming device, handheld programming device -Manufacturer: Siemens, programming device Coros with accessory cable orig -Type: Coros OP3 6AV3503-1DB10 -Dimensions cardboard: 235/230/H55 mm -Total weight: 0.7 kg Pjdpjhy Rp Refx Aa Dsgg

Condition: good (used), Here, we offer a Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device. Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device Bosch Sigpack Systems XR31-3 with Manz AICO pendant P51 hand programming device 80017134 Bosch Sigpack Systems Psdpsdqbbcsfx Aa Dsgg Type: XR31-3 Manz handheld programming device Type: 80017134 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: ready for operation (used), Mitsubishi A6GPPE Programming Controller AV 220 V 50 HZ used 100% functional Psdpfxoi Eb Ico Aa Dsgg

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 Pgsdsx E Aywepfx Aa Djg - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Condition: used, functionality: unexamined, Ferwood Code: RU0010016 - Manufacturer Code: 2-083-02-7816 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Pgsdpfswtgb Uox Aa Deg

Condition: used, functionality: fully functional, Year of construction: 1987, sheet thickness steel (max.): 4 mm, travel distance X-axis: 600 mm, compressed air connection: 5 bar, overall weight: 3,900 kg, I stopped producing garden furniture and that`s why I sell it. Good and reliable japanese machine. Many tools,some are brand new Amada original turrets. Manual book exist. Psdpfx Aasxvmq Ej Dsgg

Condition: good (used), Programming cart KP-Qume QVT52 III consisting of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35,5 cm) Picture tube flat, white phosphor Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character display - 80 characters: 14 x15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Frame rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM code page 437/850 Pedpfsivd Eaox Aa Djgg Screen saver yes, adjustable times Memory depending on emulation 4 or 7 screen pages Keyboard New ASCII (N.A.), different languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38,4kB / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR or none / Option: RS422 or Current Loop Data format 7 or 8 bit / even,odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode full or half duplex / block Printer interface 1x serial, RS232 DB 9 Power supply 95 - 264 VAC, 47 - 63 Hz Power consumption (max.) 24 W Other hardware Bosch disk reader FDS 514 Bosch PDV control unit Bosch Handheld HBG 2 incl. trolley and various data cables Item condition: used Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, Programming console, operator panel, robot teach pendant Robot teach pendant, teach box, handheld command station, handheld panel BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualizing IndraLogic, IndraMotion MLC, IndraMotion MTX. 2. Setting up machines and systems. 3. Operating and diagnosing extended handling systems. 4. Visualizing simple operator panels on assembly lines. Type No.: VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No.: R911170692-104-08W34-I-B-H-T Serial number Year of manufacture: 2008 Firmware: FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of manufacture: 2008 Operating system: Windows CE 4.2 Interface: 1x Ethernet (RJ 45) Nominal voltage: 24 VDC Nominal current: 0.7 A Power consumption: max. 14 W Display: 8.4" Touch TFT, 800 x 600 pixels Operation: Touch and keypad operation with 34 keys Protection class: IP65 - Connection cable approx. 8 m Podjd Ab D Sepfx Aa Dsgg - 19-pin connection plug - Three-stage enabling switch - Flexible use thanks to hot-plug capability Weight: 3 kg Fully functional, tested In good condition

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, turning diameter 180 mm, max. swing diameter 560 mm, Y-axis +/- 25 mm, Q-axis / programmable tailstock, Q-axis travel 360 mm, Q-axis measuring system rotary, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, turret with 16 stations – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, parts tray, accessories, driven tool holders, fixed holders. Pgsdeydvfpspfx Aa Dog

Condition: new, Year of construction: 2026, Horizontal bending machine T 300 Multi Pgedpofh Tntofx Aa Djg - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 30 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x20 mm round tube 3/8" - 2"

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: RP-3AH-S62(robot) | CR1-571-S62 (controller), overall weight: 32 kg, load capacity: 3 kg, arm reach: 335 mm, controller manufacturer: Melfa, controller model: CR1-571-S62, input voltage: 230 V, repeat accuracy: 0.008 mm, Equipment: documentation/manual, Used Mitsubishi RP-3AH Melfa industrial robot, complete with controller and documentation. Manufacturer: Mitsubishi | Melfa Year of manufacture: 2006 Model: RP-3AH-S62 (robot) | CR1-571-S62 (controller) Voltage: 230 V (50/60 Hz) Maximum load: 3 kg Pgsdpfx Asx Tqhxoa Deg Includes manuals for both robot and controller, programming instructions, software CD, and power cables.

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Psdpfsxzhrzox Aa Djgg

Condition: new, Year of construction: 2025, overall weight: 1,000 kg, Horizontal bending machine T 300 Multi new version - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 30 to. - length of stroke 250 mm Psdpfx Aowqftdea Degg - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x20 mm round tube 3/8" - 2"

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Pedpedz Srbsfx Aa Dogg Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Pjdpfx Aodz Sraja Djgg Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Pgjdpfx Aasxa D Hrj Dog

Condition: new, Year of construction: 2022, PFO 3D-2 HAL Highest productivity - Highly dynamic and highly accurate 3D scanner with lightweight mirrors, with which applications up to 8000 W can be realized - Incl. documentation, transport packaging and spare parts catalog Numerous interfaces - For robot communication in "on-the-fly" operation Sensor recording for quality monitoring - Process monitoring (e.g. connection of photodiodes, camera or pyrometer) is possible on the PFO TruControl 1000 control system incl. PFO software - Optimum synchronization between laser and processing optics Pgodpfett Eb Djx Aa Dog - For simple control and operation of the laser device and the PFO either via a control panel or an external PC - 24x digital I/O interface, expandable with fieldbus interfaces such as ProfiBus, DeviceNet and many more - Storage option for 199 laser programs Maximum process reliability - Integrated crossjet for maximum protective glass service life - Highest repeatability of process results thanks to minimization of the metal vapour effect (MDE) by special nozzle Vision Line Basic - Digital camera image with crosshairs in the laser focus for observation of the workpiece and teaching - With scanner optics, the effect of chromatic aberration is minimized aberration is corrected for all positions in the processing field - Integrated algorithm for simple calibration - Convenient touchscreen operation - Still image / live image - Saving of images TruTops PFO - Offline software for 3D programming - Network connection to TruControl - Enables the programming of different wobble methods wobble methods

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. Pgjdpfody Hrdsx Aa Dsg - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Pedpfx Aevvi I Rja Dogg

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits Pgedpfx Asyan Sgja Dsg • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: ready for operation (used), Year of construction: 2019, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm Number of working hours ca. 40.0 h control DA 58 T oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8186 kg range L-W-H 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours (!!) current new price approx. 80.000 Euro special price on request - in checked conditions - machinevideo - ?v=g0lwOs0s_40 ----- POWER BEND PRO electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color screen TFT with high resolution * Bending sequence calculation * Product programming and display in real size * USB interface - CNC controlled axis : Y1 - Y2 - X - R + CNC crowning system - CNC electro-motorized back gauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 2x manually adjustable stop fingers - ROLLERI roe deer foot top tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device : Light barrier Pjdpfx Ajx Haxtja Djgg - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions