Used Operating Resolution for sale (26,985)

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology Njdext Dk Rspfx Ac Ajwd - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Nwjdoywwrfjpfx Ac Asd Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH Nedpfx Aceywwq Ue Ajwd • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: MZGKM0045-710N-HC, overall weight: 1,500 kg, For sale: lightly used large-format printer GZM32KM PRO, ideal for printing banners, self-adhesive films, textiles, and other printing materials. The machine is in excellent technical and visual condition, regularly maintained and fully ready for immediate operation. Printing width: up to 3.2 m Resolution: up to 1440 dpi Colour configuration: CMYK x2 8 Konica Minolta print heads – high quality and accuracy UV LED technology – instant drying Nwjdjyxak Hepfx Ac Asd Suitable for various materials The printer delivers vivid colours, durable prints, and high productivity – an excellent choice both for expanding an existing business or starting a new print direction. Machine maintenance has been carried out by the official dealer All maintenance performed on time Inspection and demonstration in operation are possible.

Condition: ready for operation (used), Year of construction: 2012, pressure 260 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 185 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 160 mm back stop - adjustable max. 800 mm Number of working hours ca. 900 h oil volume 300 ltr. voltage 400 Volt total power requirement 22.0 kW weight 17000 kg range L-W-H 5150 x 2350 x 3000 mm current new price approx. 110.000 euros with only approx. 900 operating hours (!!) special price on request ----- POWER BEND PRO electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - DELEM - CNC control model "ER70 2D Graphic" * 2D graphic programming mode * Screen with high resolution * Bending sequence calculation * Tool and program library * Swiveling control unit, front left - CNC controlled axes : Y1 - Y2 - X - R and CNC crowning - CNC electro-motor controlled backgauge * Traverse path : X axis ... 800 mm // R axis ... 250 mm * Traversing speed : - X axis ... 500 mm/s - R axis .. 350 mm/s * on recirculating ball screws * 2x manually adjustable stop fingers - split ROLLERI "PS 135" roe deer foot top tool * including crowning device in the tool holder - 1x universal reversible die block * dimension : 160 x 160 mm Nedpfx Aoywzwfsc Aowd * V opening : 100 70 50 35 mm * V opening 100 70 mm with infeed rollers - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine - 2x front support arms with SLIDING system (HIWIN slide bearing) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions incl. switching

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SP.10.93015388, The ARTEC Space Spider is a professional, handheld 3D scanner with ultra-high resolution, utilizing blue structured light technology. It is renowned for its accuracy and stable performance in varying environmental conditions, thanks to its advanced temperature stabilization system. The scanner has seen very little use and is in excellent condition. Included in the set are the original carrying case, battery pack in a protective pouch, original power supply and cables, as well as a calibration kit. The ARTEC Spider is an excellent complement to the ARTEC Eva. The Spider precisely scans fine details requiring high accuracy—tasks that the larger Eva scanner cannot handle as effectively. Scans from both devices can be merged, resulting in a large-scale, accurately digitized model with preserved fine details. VAT invoice or bill of sale can be provided. Courier delivery is available after payment has been received by bank transfer. Nodpfx Acsykrlxj Aswd Personal collection is possible after bank transfer or upon cash payment at pickup. Price is negotiable—please inquire for details. We reply only to inquiries from European countries. Specification, key features: - Accuracy: up to 0.05 mm. - 3D resolution: up to 0.1 mm. - Texture resolution: 1.3 megapixels (Mpx). - Scanning speed: up to 7.5 frames per second (up to one million points per second processing rate). - Technology: Blue structured LED light, safe for humans and objects. - Tracking: Hybrid, geometry and color-based, no need for reference markers. - Weight: 0.85 kg, ensuring high mobility. - Compatibility: Works with Artec Studio software, allowing for data processing and export to popular CAD formats (e.g., STL, OBJ, PLY). - Mobility: Can be powered from the mains or an optional battery pack, enabling field operation without a permanent power supply.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nodpfx Aoxwaz Hec Ajwd

Year of construction: 2024, condition: new, The DA-69T control offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on product feasibility and handling. DA-69T features: - 3D- and 2D- graphical touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Sensor Bending and correction interface - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! Njdpfxod Sak So Ac Aewd - Fully electronic drive - Up to 30% higher productivity - Up to 50% energy savings through Start-Stop technology - Faster than hydraulic press brake - Reduced operating costs - Much lower service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) - No harmful oil - quiet - efficient - independent of Hyd. Oil - Low noise operation - relaxed and stress-free bending - Complete work area - Touchscreen operation Machine dimensions: ( L x W x H ): 2.150 mm x 1.650 mm x 2800 mm Technical details: bending length: 1.250mm Free stand passage: 1.300 mm Press

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. Nodpfx Aceh Uuhcj Ajwd In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,500 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 950 mm, spindle motor power: 72,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 4, This 4-axis BOEHRINGER NG-200 horizontal turning machine was manufactured in 2008. It features a maximum speed of 4500 rpm and a swing diameter of 290 mm. The machine is equipped with two turrets, each capable of holding 12 tools, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER NG-200 machine we have for sale. Contact us for further details. • Machine configuration: 2 turrets at the top (boven 2 revolvers) • Drive power (100% ID): 60 kW (2 × 30 kW with counter spindle) • Drive power (40% ID): 72 kW (2 × 36 kW with counter spindle) • Drive torque (100% ID): 300 Nm (2 × 200 Nm with counter spindle) • Drive torque (40% ID): 360 Nm (2 × 240 Nm with counter spindle) • Spindle bore: 65 mm • Spindle diameter (front bearing): 120 mm • Spindle nose (DIN 55026): A6 • Chuck diameter: 200–250 mm • Swing diameter: 290 mm • Resolution Z-axis: 40 nm (2 nm interpolated) • Rapid traverse speed Z: 25 m/min • Max. feed force Z: 8,000 N • Distance between main and counter spindle: max. 1034 mm • Max. torque C-axis (left/counter spindle): 200 Nm • Max. speed C-axis (left/counter spindle): 300 rpm • Input fineness C-axis: 0.001° • Number of tools per turret: 12 Nwodpfx Asyvvd Rec Asd • Max. driven tools per turret: 12 • Drive power driven tools (100% ID): 5 kW • Drive torque driven tools (100% ID): 20 Nm • Speed range driven tools: 1–4000 rpm • Coolant pump capacity (machine with two turrets): 80 l/min • Hydraulic pump capacity (machine with two turrets): 19 l/min • Electrical connection load (machine with counter spindle): 85 kVA • Control unit: Height-adjustable operating panel with 10.4" TFT display • Controller: Siemens Sinumerik 840 D Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2020, total height: 1,529 mm, total width: 776 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, overall weight: 324 kg, number of axes: 3, This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details. • Last calibration: 06 September 2022 • X-axis travel: 400 mm • Y-axis travel: 400 mm • Z-axis travel: 200 mm • Resolution: 0.1 µm (0.0001 mm) • Length measurement accuracy XY: (2 + 3L/1000) µm • Length measurement accuracy Z: (3 + 5L/1000) µm • Length measurement accuracy E2XY: (2.5 + 4L/1000) µm • Machine depth: 1303 mm • CNC control: Yes • Control software: QVPak V13.3 • Operating system: Windows 10 64-bit • Measurement display: 3D graphical measurement display • Programming interface: EasyEditor • Edge detection: Advanced recognition algorithms • Camera type: High-resolution CMOS color camera • Communication: USB 3.0 • Zoom system: 7-step zoom lens • Measurement methods: Video measurement; Touch probe measurement; Multi-sensor measurement; Automatic measurement sequences • Measurement capability: Micro and nano feature measurement Additional equipment • Touch probe type: TP20 • Probe modules: 2 standard force modules • Probe module type: TP20 standard force • Stylus holder: 5-way holder • Stylus length: 13 mm • Stylus diameter: 10 mm • Probe changer: MCR20 Nwedpfeyvqqfox Ac Aed • Probe changer capacity: 3 ports • Calibration ring: Ø20 mm • Reference sphere: Ceramic master ball Ø15 mm • Machine stand: QVST-4L • Power cable: CH type 1.8 m • Computer type: Dell Precision workstation • Processor: Intel Xeon W-2223 3.6 GHz • Monitors: 2× Dell UltraSharp U2421E • Additional software: QV Partner Manager V3.1 • Statistical software: MeasLink Real-Time Professional V9

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min Nwsdpfsyh Ivlox Ac Ajd - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW Nedpfx Ajyh Hkzsc Aswd - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Year of construction: 2020, operating hours: 40 h, condition: ready for operation (used), Industrial Freeze-Drying Equipment — Almost New Condition For sale: TECHMECH TM25 industrial freeze dryer, purchased in 2020 and used exclusively for test operations. The unit is in excellent, near-new condition. Equipment Type - Industrial freeze-drying / lyophilization system - Vacuum sublimation drying technology - Batch production unit - Designed for food processing purposes Suitable Applications - Berries - Fruits - Vegetables - Mushrooms - Ready-to-eat meals - Coffee - Functional & specialty foods Key Technical Specifications Model: TECHMECH TM25 Manufacturer: Techmech (Turkey) Drying Chamber - Volume: 200 liters - Diameter: 550 mm - Depth: 900 mm - Construction material: AISI 304L stainless steel - Leakage rate: 0.09 mbar/sec Shelving System - Number of shelves: 6 - Number of trays: 12 - Tray dimensions: 0.34 × 0.40 m - Shelf dimensions: 0.45 × 0.80 m - Total drying area: 1.7 m² - Maximum product height: up to 4 cm Cooling System - Condenser temperature: –45 °C (standard) - Optional: down to –75 °C - Ice condenser capacity: 20 kg - Refrigeration power: 3 HP - Refrigerant: R404A - Air cooling - Cooling cycle: from +20 °C to –40 °C in approx. 30 minutes Heating System - PID-controlled heating - Temperature accuracy: ±1 °C - Temperature resolution: 0.1 °C - Maximum operating temperature: 120 °C Vacuum System - Rotary vacuum pump - Stable vacuum regulation - Pirani vacuum sensor - Manual isolation and venting valves Measuring Sensors - 3 product temperature probes - 1 chamber temperature sensor - 1 vacuum sensor Automation and Control - BECKHOFF PLC automation system - 7" HMI touchscreen interface - 12-channel PID temperature management Njdpfxsyvfinj Ac Aowd - Customizable programs: up to 10, each with up to 10 process steps - Fully automatic sublimation cycle Defrost System - Hot gas defrost - Static heating support Machine Dimensions - Width: 900 mm - Length: 1400 mm - Height: 1800 mm Key Technological Benefit Freeze drying removes moisture without applying high temperatures, helping to retain the product’s structural integrity, natural color, taste, and preserves up to 97% of nutritional content. Condition - Purchased in 2020 - Only used for testing purposes - Virtually as-new - Industrial-grade European automation Location: Latvia Contact us for price, photos, or to arrange an inspection. For further information, please contact my technical specialist: +371 2635 3644

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We are selling our Knuth Werkzeugmaschinen GmbH lathe. High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display. We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site. Proven classic with gear transmission: - Cost-effective and retains its value - Clearly arranged control panel with ergonomically positioned selector levers - Camlock spindle mount D1-6 - Wide, ground and hardened bed with a solid one-piece cast base - Tailstock can be offset laterally for taper turning - Large selection of thread pitches - Removable gap bridge for machining large diameters - Stop spindle with four adjustable length stops - Optional: quick-change toolpost system, among others 3-axis position display: - Higher machining accuracy - Reduced error rate - Greater production reliability - Significant time savings - Increased productivity - Optimal legibility of the display - User-friendly functions - Clearly arranged keypad - Resolution 0.01 / 0.005 mm - Pre-setting of coordinate values - Retains axis position when display is switched off - Bolt hole circle calculation - Integrated calculator function - Memory for 10 tools - Switch between radius/diameter display - mm/inch conversion - Easy mounting, maintenance-free operation - Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft Working area - Centre distance: 1500 mm - Max. swing over bed: 460 mm - Max. swing over cross slide: 270 mm - Max. swing over gap bridge: 690 mm - X-axis travel: 285 mm - Z1-axis travel: 128 mm - Gap bridge length: 165 mm - Bed width: 300 mm - Top slide swivel range: ±52° Njdpfxsyxfuqo Ac Ajwd Main spindle - Spindle speed (12 steps): 25–2000 rpm - Spindle bore: 58 mm - Spindle mount: Camlock D1-6 - Spindle taper: MT 6 Feed - X-axis feed: 0.014–0.784 mm/rev - Z-axis feed: 0.031–1.7 mm/rev Thread cutting - Metric threads (41): 0.1–14 mm - Diametral pitch threads (50): 4–112 DP - Module threads (34): 0.1–7 mm - Whitworth threads (60): 2–112 TPI Tailstock - Tailstock quill diameter: 60 mm - Tailstock taper: MT 4 - Tailstock quill travel: 120 mm - Tailstock lateral adjustment: ±13 mm / ±0.5" Drive capacities - Main drive motor power: 5.5 kW - Supply voltage: 400 V Dimensions and weight - Dimensions: 2750 x 1080 x 1340 mm - Weight: 1970 kg

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders Nwsdsytrgzspfx Ac Ajd - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Njdpfx Acjyc Ru Ae Ajwd Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) Njdpfx Acsx D R Uwe Aewd 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base Nwodoytn Emopfx Ac Aed HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Nwjdpfx Aoywuqrec Aod Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer Nwsdpsyvhwijfx Ac Asd - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 1,900 mm, total length: 2,300 mm, table width: 400 mm, quill stroke: 520 mm, quill travel distance: 300 mm, type of input current: three-phase, distance table to quill: 120 mm, table length: 800 mm, warranty duration: 12 months, feed length X-axis: 455 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, year of last overhaul: 2026, table load: 800 kg, input frequency: 50 Hz, working range: 900 mm, input current: 10 A, Equipment: documentation/manual, EDM312MF20/30 Machine: Complete Overhaul 12-Month Warranty Year of Manufacture: 2007/2026 Nodpfx Aeyxlxiec Ajwd Travel Range X/Y/Z: 450x300x300mm Distance Table/Z-Support: 120/520mm Work Table: 820x400mm Work Tank: 900x520mm Filling Height of Work Tank: 300mm Max. Dielectric Volume: 750l Max. Electrode Weight: 30/150kg Workpiece Weight: 800kg Machine Weight: 2800kg Machine Dimensions (W x D x H): 1960x1800x2610mm Equipment: MF20 Operator Interface Optional with MF30 Operator Interface CO² Fire Extinguishing System Cartridge Filter Heat Exchanger Direct Measuring System in X/Y/Z/C Axis C-axis: 100 rpm, Resolution 0.0001° C-axis Holding Brake Generator: 65 Amp EDM Current C-Box for High Removal Rates in Carbide Machining Electrode Changer, 20 Positions Quick-Change Electrode Holder EROWA, Hirschmann, 3R Options: New Control System with MF30 Operator Interface New EDM Generator Fume Extraction with Activated Carbon Filter Training On-site Commissioning Transport

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Nwodpfeyrty Tjx Ac Asd Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads Nsdjyrty Hopfx Ac Aowd even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: good (used), Technical specifications • Print speeds: - Outdoor-quality prints: approximately 800 square feet per hour (70 square meters per hour)(8) - Indoor-quality prints: approximately 400 square feet per hour (35 square meters per hour)(8) • Print resolution: Up to 1200 x 600 dpi • Media - Handling: Roll feed - Types: supports most low-cost, uncoated, solvent-compatible media - Size: Up to 2.64m (104 inches) wide Nedpfxjgyzzqs Ac Ajwd - Loading: Up to 110 kg (242 lb), up to 25 cm (9.8 inch) outside diameter • Printing - Six-ink printing with HP 786 3-liter Latex Designjet Ink Cartridges: cyan, magenta, yellow, light cyan, light magenta and black. - Three total HP Wide Scan Printheads (each contains two colors – cyan/black, yellow/magenta, light magenta/light cyan) - Ink Type: HP Latex Inks - Nozzles: 10,560 per printhead - Outdoor display: up to 3 years unlaminated, 5 years laminated(2) on a range of media - Indoor display: up to 5 years unlaminated, 10 years laminated(2) on a range of media - Ink drop: 12 picoliters • The HP 786 Designjet Maintenance Kit, including a printhead cleaner roll and two air filters, keeps the HP Designjet L65500 printer operating at peak performance. • Interfaces: Gbit Ethernet