Used Opti Cut for sale (15,438)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrical system new Siemens S7 control Completion upon order Cross-cut saw with chalk line detection Wood cross-sections 430x30 / 300x150 / 200x200 mm Ihjdpfx Adov Diy Aowst DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter

Condition: like new (used), Year of construction: 2022, operating hours: 65 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness copper (max.): 30 mm, sheet thickness brass (max.): 30 mm, total width: 1,500 mm, total length: 3,000 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, Equipment: documentation/manual, Slightly used Swift Cut Pro 3000 with Hypertherm 125A power source. Iedpfx Aox E At Rodwsht

Condition: excellent (used), Optimatizer Opticut S90 Year: 2021 Condition: excellent. Operating video of the machine is available. Ihsdjxyxfiepfx Adwet

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem. Ihjdpjxxighefx Adwot

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used Ihjdpfxjwtgcxo Adwet

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Ihjdpfx Adjxyk Tlewst

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Y-travel: 1,000 mm Z-travel: 700 mm Iodpsxn I U Njfx Adweht Tool holder: SK 40 Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: ready for operation (used), Year of construction: 2011, Marel Opticut Portion Cutter is a modern device designed for precise portioning and cutting of meat, poultry, fish, and ready-made meals. Manufactured in 2011 by the renowned company Marel, it is part of a series of premium machines that combine accuracy, reliability, and efficiency in the food processing industry. The machine is equipped with an Intralox S1100 Flat belt with a width of 253 mm and a length of 3100 mm, which ensures smooth product transport and high hygiene standards. The 3×380–480V power supply and 9.5 kW power guarantee efficient operation even in intensive production conditions. The Opticut cutting system allows for even, repeatable portions with precise control of the thickness and weight of each piece, which translates into minimized raw material waste and maximum production efficiency. Thanks to its solid stainless steel construction, the machine meets the highest hygiene standards and is easy to keep clean. The Marel Opticut Portion Cutter is used in meat, poultry, and fish processing plants, as well as in the production of ready meals and snacks, where repeatability and cutting precision are important. Technical specifications: Manufacturer: Marel Model: Opticut Ijdpfxsxn R Tue Adweht Year of manufacture: 2011 Capacity: 7200 kg/h Up to 120 cuts per minute Belt type: Intralox s1100 ftac Knife type: Vertical guillotine blade Belt dimensions: 253 x 3100 mm Power supply: 3×380–480V, 50/60 Hz Power: 9.5 kW Construction: stainless steel Machine dimensions: L: 2300 mm x W: 700 mm x H: 2750 mm Advantages: ✅ Precise portioning and cutting with high repeatability ✅ Efficient operation in production line systems ✅ Hygienic stainless steel design ✅ Easy to operate and clean ✅ Excellent workmanship – Marel brand ✅ Includes a trolley for accessories and spare parts

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Iodpev Uab Esfx Adwoht

Condition: used, Type: FB50 OPTICUT Ihodpfx Ads Dv N Dowst Technical characteristics: DIGITAL BORING

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Ihedpfxjw Rr Dbs Adwst

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL Ihjdpfx Adettlfkjwjt ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Isdpfxeq Ulh Ho Adwjht Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good Ihedpfxjv Dm U Ro Adwjt --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Isdpfxocudize Adweht Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-07190386, sheet thickness steel (max.): 22 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Ijdpjvw Amcofx Adwjht Cutting area: 3000 x 1500 mm Drives: 400 W AC OMRON servo motors Plasma source Hypertherm: Powermax 105 Duty cycle: 80% 100% duty cycle: 94 Amps Maximum piercing capacities Mild steel: 22 mm Stainless steel: 20 mm Aluminium: 20 mm MACHINE DETAILS Space requirement: 5.50 x 2.80 m Machine dimensions: approx. 3.7 x 2.0 m Transport dimensions: 3780 x 2115 x 1500 mm Weight: 1.1 t Box software: included Operating hours: 265 arc hours

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fully automatic die-cutting and creasing of paper, cardboard, and films Magnopro I-CUT12090 Year of manufacture: 2022 Latest software including NEW touchscreen control unit from 2024 Ihodjwbgm Hspfx Adwst Connection: 230 V Material thickness depending on model: 10 mm Data formats: PLT, DXF, HP/GL, PDF, EPS Feeder: sheet feeder with vacuum/roll-off device (optional) Max. format: 90 x 120 cm Dimensions (W x D x H): 320 x 150 x 115 cm Alignment: CCD camera system Speed up to 1000 mm/sec Positioning: vacuum belt Dpkktr Programming: barcode reader, QR code Accuracy: +/- 0.1 mm Sheet and roll feeder! Plus 19% VAT For self-collection only

Condition: used, Year of construction: 2013, 3-axis CNC machining center MTRent/MTCut V110, No. 131057, built in 2013, 30-station tool changer, chip conveyor, cooling units, SIEMENS Sinumerik 828D control system, weight approx. 6,900 kg Isdpfx Adowczg Rewjht

Condition: good (used), Pal-Cut 800 Minkpapir Sheet dispenser Packaging machine Iedpfx Ajtub T Uodweht 3 pieces in stock

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dual frequency 50/60Hz Ihjdpfxov Dmz De Adwjt

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" Isdpsthg Disfx Adwsht SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Iedpox I Ehpjfx Adweht MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm Isdpfsx I Akuex Adwoht MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Iedsx Trm Aopfx Adweht Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 25,757 h, laser power: 7,000 W, sheet thickness (max.): 30 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Table length: 4,000 mm Table width: 2,000 mm Max. sheet thickness (steel): 30 mm Max. sheet thickness (stainless steel): 30 mm Max. sheet thickness (aluminum): 25 mm MACHINE DETAILS Control: Siemens Sinumerik 840D SL Laser source model: TruFlow Laser power: 7,000 W Operating hours Laser on-time: 56,691 h Beam on-time: 25,757 h EQUIPMENT - PierceLine - FocusLine - NitroLine - PlasmaLine - Cutting head with 250 mm lens - Universal quick-change unit (UTI) with system bus - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Automatic nozzle changer - High-speed head - Water cutting head (Cooline) Isdpfjx S Hmbsx Adwjht - CO laser TruFlow 7000 with optimized standby mode - Maintenance-free turbo radial blowers - High-frequency excitation - Laser control TASC - Laser power regulation - Laser logbook function - CE marking Dismantling and loading can be offered by the seller for an additional charge.