Used Orbital Riveting Machine for sale (65,578)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! Djdpfjzwmn Tsx Aptswb TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Dwsdex Edtcepfx Aptsb Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: In our warehouse

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. Dedpfx Apjy Uquhetewb The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Year of construction: 2012, condition: used, This HESA riveting system, model AUTO10 MQB Automation, will be auctioned off online as part of our industrial auction / machine auction, J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Dwodpfezxf Nrox Aptsb

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Dwedszkkayspfx Apteb Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." Dwjdpfozx A Tbjx Aptob After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Dsdpfsralk Rjx Aptowb Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Condition: used, Year of construction: 2023, machine/vehicle number: 142597-100, overall weight: 3,000 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 60/210 Unilog B8, will be auctioned off online in our industrial auction / machine auction due to the business closure of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vices, tool holders, and much more. You can find this and many other items on our platform. Dsdpozy H Irsfx Aptswb

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Dsdpfeyzi Iaox Aptjwb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Dwedpfx Aowwz Dlsptjb Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation Dsdjuc Sifepfx Aptowb

Condition: used, Year of construction: 2015, machine/vehicle number: 136666-100, overall weight: 4,600 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 120/525 Unilog B6P, will be auctioned online as part of our industrial auction / machine auction – business liquidation of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vises, tool holders, and much more. Djdpfjzy H Edsx Aptswb You will find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roller material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum printing speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg EQUIPMENT Dodpfx Apozxgnvotjwb RIP (see images) Note: The machine heads need to be replaced. The seller can offer a complete service for this.

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. Dwjdpfxowwzuds Aptsb With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm Dwsdjzlbx Nepfx Aptsb • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)

Condition: good (used), Year of construction: 2000, functionality: limited functionality, overall weight: 2,200 kg, SCM Tech 95 CNC The computer is faulty, the new computer is shown in the pictures, but needs programming. I have all the installation CDs for the machine. Dodpfxezzx Its Aptewb The machine comes from a school, has hardly been used, and is technically in very good condition.

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! Dwedozy Ullepfx Aptob The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) Djdpfjzwgxrjx Aptjwb • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Dwodpewtnxnsfx Apteb Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): Dedpfx Apoyzh Ulstjwb - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: G0E 1075, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, controller model: Mitsubishi 64S, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 460 mm Dwedpozx Ahxefx Aptsb Spindle speed: 12,000 rpm Tool holder: BT40 Table size: 700 x 410 mm Maximum table load: 250 kg Number of tool magazine slots: 24 MACHINE DETAILS CNC control: Mitsubishi 64S Coolant pressure: 20 bar Dimensions & Weight Machine dimensions (L x W x H): 1,880 x 3,550 x 2,790 mm Machine weight: 4,300 kg Operating hours: The seller estimates the operating hours to be approximately 20,000 hours. EQUIPMENT Spindle cooling Chip conveyor Extraction system Electronic handwheel Renishaw measuring probe Ethernet interface Approx. 100 tool holders including cabinet

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! Dwsdpfx Ajzy Ukbspteb The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: new, Number of sanding units 10 St. sanding width 25-240 mm Sanding height max. 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design Dwedpfxszqvnpj Aptob - Freely selectable abrasive configuration from the MB Flex System. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x Twin orbital sanding unit for right-side processing - 1x Twin orbital sanding unit for left-side processing - 1x Twin-spindle unit for right-side processing - 1x Twin-spindle unit for left-side processing - 1x Twin-spindle unit for processing from below - 1x Twin-spindle tilting unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning (Technical specifications provided by the manufacturer – subject to change/without guarantee!)

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Table size/working area: 1,000 x 600 mm Maximum workpiece height: 230 mm Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg Djdpfx Apozx Dz Hotswb EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. Dwjdpfx Apszu Nm Hetob * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.