Used Oscillating Mortiser for sale (794)

Condition: used, functionality: fully functional, power: 28 kW (38.07 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 3,800 kg, operation weight: 3,800 kg, lifting power: 1,500 kg/m, lifting height: 2,700 mm, tire size: 11,5/80-15,3, axle configuration: 4x4, digging bucket width: 1,600 mm, Year of construction: 1994, operating hours: 4,340 h, machine/vehicle number: 4240120, Equipment: 4 in one shovel, additional headlights, all wheel drive, cabin, differential lock, pallet forks, A small yet powerful Liebherr wheel loader. The loader has an operating weight of approximately 3.8 tons, a dump height of approximately 2.30 meters, and a lift capacity of approximately 1500 kg on level ground. The small turning radius of the all-wheel-steered wheel loader allows it to work even on the tightest construction sites. Despite its older model year, the loader has only 4,300 hours on the clock and is in good used condition. The reliable Deutz diesel engine starts reliably even in colder temperatures. The engine and hydraulic pump have sufficient power and are dry. All bearings have very little play. TECHNICAL DATA: * Manufacturer: Liebherr * Type: L504 * Year of manufacture: 1994 * Operating hours: approx. 4,340 hours * Engine: Deutz diesel engine F3L1011 * Power: 28 kW (38 hp) at 2,500 rpm * Drive: hydrostatic all-wheel steering * Oscillating rear axle with a maximum tilt of 10 degrees * Brakes: hydrostatic / mechanical * Travel speed: continuously variable * 1st gear: 0-5 km/h * 2nd gear: 0-20 km/h * High and low gears * Turning radius with bucket: 3,580 mm * Kinematics: single parallel * Digging depth: 42 mm * Back/dump angle: 41 / 40 degrees * Ground clearance: 265 mm * Limited-slip differential: automatic * Lifting capacity: 32.5 kN * Breakout force: 24 kN * Tipping load: 2450 kg * Payload with fork (flat terrain): approx. 1500 kg * Dumping height at a 40-degree dumping angle: approx. 2.32 m * Max. height (bucket pivot point): approx. 2.90 m * Max. height (bucket top edge): approx. 3.64 m * Dumping range: 575 mm * Stacking height: approx. 2.70 m * Tires: Pneumatic tires * Front tires: 11.5/80-15.3 * Rear tires: 11.5/80-15.3 * Incl. pallet fork * Incl. 4-1 bucket * Incl. joystick lever with floating position * Incl. mechanical quick-change system * Incl. complete lighting system * Incl. heating/ventilation * Incl. front and rear window wipers * Incl. ROPS/FOPS cab * and much more * Maximum axle load (axle 1): 2500 kg * Maximum axle load (axle 2): 3000 kg * Maximum gross vehicle weight: 4000 kg * Total length (incl. bucket): approx. 4.45 m * Total width (incl. bucket): approx. 1.60 m Ndedpfxev Su Ize Aanof * Total height: approx. 2.46 m * Dead weight: approx. 3800 kg * Serial No.: 4240120 You are welcome to inspect this and all other equipment by appointment, test it on-site, or take it for a test drive. If you have any questions about our machines, please feel free to contact us.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Internal reference number for inquiries: 5-043 MAN TGS 35.540 8x2H-6 BL with flatbed body and Palfinger PK92002-SH loading crane including JIB and winch Vehicle: Technical weights: - Permissible gross combination weight: 48,000 kg - Gross vehicle weight: 32,000 kg - Front axle load: 9,000 kg - Front axle load: 29,000 kg - Rear axle load: 12,000 kg - Trailing axle: 8,000 kg - Main wheelbase: 3,505 mm - Fuel tank volume: 390 l - RINGFEDER type RF40/G150A (40mm) - MAN D2676 LFBI diesel engine, 397 kW (540 hp), 2,650 Nm torque, Euro 6e - MAN TipMatic 12.28 OD - Gearbox-dependent PTO, continuous operation - MAN EfficientRoll transmission function - Rocking-free transmission function - High-performance engine brake MAN PriTarder with MAN EVBec, multi-stage - MAN HydroDrive, hydrostatic axle drive on second axle - Trailing axle (rearmost axle), non-driven, steered, liftable - Driver's cab TM: the comfortable (narrow, long, medium-high) - LED Package Plus: headlights, fog lights, cornering lights - 2 air horns on cab roof - All-round LED beacons, yellow, with function monitoring - Mirror package: electric heated, adjustable exterior mirrors, front mirror, kerbside mirror right - Multifunctional leather steering wheel, height and tilt adjustable - Air conditioning, Climatronic - Additional water heater, 4 kW - Retractable fridge and drawer, middle and rear section - Cruise control (speed regulator) - Traffic sign recognition - Turning assistance system - Emergency brake assistant EBA Plus - Lane departure warning LDW - Reversing Motion System - Pre-installation for alcohol interlock, not bypassable - MAN Media System Professional navigation 12.3" - MAN Advanced sound system with subwoofer and much more. PAVIC flatbed for building materials - Flatbed internal dimensions: 5,200 x 2,480 x 600 mm - Mounted on subframe - Lashing points along the side frame profile every 280 mm - Floor made of 27mm anti-slip plywood - Front wall, drop sides, and tailgate made of aluminum, 25mm - Front wall height = 1,000mm, including uprights - Front wall with full-width toolbox, side doors left/right, 2 work lights mounted on the front wall - Two-section sideboards, foldable and removable, with rubber bump stop - Tailgate with hydraulic extension, 1,000 mm - Drop side locks - Aluminum forklift collision protection fitted to edge profile - Made of steel sheet, sandblasted and painted - Flatbed edging and uprights painted in RAL standard color - Outside drop sides painted in RAL standard color or natural anodized aluminum - Container locks: 4 pcs. (2 installed inside flatbed, 2 on tailgate console) - Hydraulically extendable underrun protection (brand: Guima), electrical installation, painting in RAL standard color Palfinger PK92002-SH with JIB and winch - G – Hydr. eightfold extension - Two slewing drives - Hydraulic, long outriggers - Outriggers hydraulically pivoting 180° - Remote-controlled support, 8+2 elements - Transport position monitoring for stabilizers - Support intelligence - Stability system HPSC - HPSC-Plus loading module - HPSC additional function front/stabilizer leg - HPSC additional function rear/stabilizer leg - Palfinger Connected - Flow sharing - Crane transport position monitoring - Frame overload protection - Active oscillation damping system AOSP-FOLD – folding assistant - Paltronic 150 - Preparation for hose equipment "Code 4" - Hose equipment for two additional attachments Ndedpfx Aasxnnyfjnsf - MULTI1 – quick coupler

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11886=GP3980, Year of construction: 2008, load capacity: 4,500 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: free lift with telescopic boom, construction height: 2,950 mm, power: 106.65 kW (145.00 HP), motor manufacturer: Iveco, gearing type: automatic, overall weight: 14,500 kg, total height: 2,950 mm, total length: 6,600 mm, total width: 2,400 mm, color: green, Equipment: all wheel drive, cabin, head guard, lighting, pallet forks, power assisted steering, trailer coupling, Telescopic Handler Merlo 4521 MCSS, Equipped with a 6-cylinder Iveco turbo diesel engine, hydrostatic drive, 2-speed transmission (11/20 km/h), tires 18-22.5 16 PR Mitas MPT06, cab with heating and air conditioning, split door, 360° all-round visibility, adjustable seat, front, rear, and roof wipers, sun blind, 5-in-1 joystick (electro-proportional), fully electronic control of all functions, 4-section telescopic boom, hydropneumatic self-levelling (automatic or manual control), 4 outriggers, continuous rotating slewing ring, hydraulic steering (3 steering modes), permanent all-wheel drive, fixed front axle, oscillating and lockable rear axle, disc brakes, parking brake, computer-assisted stabilisation control (MSCC system), 12V electrics, platform pre-installation, hydraulic quick-change system "ZM2", including remote control, pallet fork, large work platform, 900 L bucket, and winch. Nodpjx Ir Ntsfx Aanjdf

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 072, The used HOUFEK FINAL 1300 brushing machine is a high-performance brush sander designed for final surface finishing tasks—fine sanding, structuring, smoothing, and other finishing operations. The specific surface treatment depends on the type of tool (brush) used. It offers versatility in working units (tools) and their oscillation to optimize results. Working unit: 3 x brushes Working width: 1300 mm Total power consumption max.: 24.5 kW Fixed table height allows integration into production lines Oscillation of brush units Max. workpiece height: 160 mm Feed belt speed: 3 – 15 m/min Motor power: 3 x 5.5 kW Unit roller diameter: 300 mm Machine dimensions (L/W/H): 2900 x 1950 x 2200 mm Weight: 2,100 kg Year of manufacture: 2008 Machine condition and wear: - Stuck working lift, probably due to a broken lifting screw(s) - Feed belt worn on both edges; does not affect function with smaller workpieces - Brush wear; the first brush is in relatively good condition - Minor cosmetic defects Machine price as-is: EUR 9,050 excl. VAT Ndodpfxoxv Ange Aanef Machine price after complete overhaul: EUR 14,400 excl. VAT The machine’s condition and readiness for collection must be checked in advance! Available in Telnice near Brno Testing, demonstration, and operator training are provided as a matter of course.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h Nsdpfx Aaex Iggyjnsdf • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Ndjdpfxexr Tx Uj Aanjf Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Nsdoxta H Ispfx Aansdf Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: used, Year of construction: 2021, operating hours: 757 h, Equipment: all wheel drive, Zoomlion ZA14J Articulated Telescopic Work Platform, AH 16 m * Working height 15.8 m * Platform height 13.5 m * Lateral outreach 8.3 m Nedpewmx N Djfx Aansdf * Year of manufacture 2021 * Hour meter read 757 * Articulated telescopic steel construction * Drive via 4-cylinder Kubota diesel engine * 2 speeds * Tire size 355/55D625 * Tread depth 18-20 mm * Non-marking tires * Wheelbase 2300 mm * Wheel configuration 4x4 * Oscillating axle * Overall dimensions 6800 x 2400 x 2500 mm * Weight 7100 kg * Basket load 300 kg * Rotating basket * Hydraulic jib 1250 mm * Steel basket * Basket dimensions (L x W x H) 1770 x 560 x 1100 mm * Basket and floor control * Beautiful machine * Videos via WhatsApp at We will be happy to send you more details and photos upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. More details and photos are available upon request. Please also visit our website.

Condition: new, Year of construction: 2025, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) Nsdpfjw H R Aiox Aanedf CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes

Year of construction: 2013, condition: excellent (used), Lasermachine Amada FLC 3015 AJ Fiber year: 07/2013 Power: 2000 Watt (Fiber) Working hour: ca. 38.000 h / 14000h Available beginning of March 2023 Technical data machine: Working range: 3100 x 1550 x 100 mm Table loading weight: 920 kg Positioning speed (X/Y/Z): 120/120/120 m/min Drive technology (X/Y/Z): linear drives Max. acceleration: 30 m/s2 Laser principle: Flying optic Positioning tolerance: +/- 0,01 mm Positioning spread: +/- 0,005 mm Machine weight: 11.000kg Oscillator: Laser source: Laser diode-pumped fibre laser Type: AJ-2000 Laser power: 2000 Watt Laser wave length: 1,08 µm Stability: +/- 2% Pulse frequency: 1 – 10.000 Hz Duty range: 1-100% Control: Type: AMNC-F Screen: touchscreen Interfaces: network, USB Equipment: Automatic pallet changer High pressure cutting device (CleanCut) Aluminium cutting device Automatic gas pressure adjustment NC-focus control Sensor cutting head Diode for positioning Cutting process monitoring Safety device Cooling Cut Peripherical devices: Transformator Cooling unit Dust collector Pallet changer Operator panel Max. material thickness: Mild steel: 12 mm Stainless steel: 8 mm Alumino: 6 mm Brass: 4 mm Copper: 3 mm Technical data loading/unloading unit: Numbers of cutting pallets: 2 pieces Ndodpfx Asirt Ewsanof Min. sheet size: 2000 x 1000 mm Max. sheet size: 3050 x 1525 mm Sheet thickness: 0.8 – 25 mm Max. sheet weight: 920 kg Cycle time: 69 s Type of fork unload: single fork unload with roller chains Raw material stack height: 400 mm Unloading stack height: 300 mm Min. part size: 180 x180 mm Machine total height: 2650 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s Ndodpoxz Ialefx Aanef - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: Ndedpsxr Txzjfx Aansf We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: used, Year of construction: 2002, total length: 2,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 700 kg, space requirement width: 1,000 mm, space requirement height: 1,600 mm, space requirement length: 2,600 mm, power: 6.5 kW (8.84 HP), No. 04503 Edge processing machine Rehnen KBA Used, year of construction 2002 The machine has been designed for sanding edges, milling profiles and sanding profiles in a throughfeed process. The materials to be processed are solid wood, chipboard and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding unit Sanding belt dimensions 150 x 1500 mm Oscillation path 30 mm Contact roller and sanding pad - Milling unit top - Milling unit bottom - Profile sanding unit top Nsdexzu Iispfx Aanjdf Incl. technical documentation Transport dimensions approx. 2600 x 1000 x 1600 mm LWH Weight approx. 700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2013, operating hours: 3,238 h, Equipment: all wheel drive, Telescopic Boom Lift Genie S 65, All-Wheel Drive, 22 m * Working height: 22 m * Platform height: 20 m * Lateral outreach: 17 m * Telescopic steel construction * Powered by 3-cylinder Deutz diesel engine * 2 driving speeds * Tyre size: 355/55D625 * Tread depth: 15-21 mm * Wheelbase: 2,500 mm * Drive configuration: 4x4 * Oscillating axle * Overall dimensions: 9,500 x 2,480 x 2,680 mm * Weight: 10,450 kg * Platform load capacity: 227 kg * Rotating platform basket * Hydraulic platform jib: 1,420 mm * Basket with steel construction * Basket dimensions (L x W x H): 1,560 x 690 x 1,100 mm * Platform and ground control Further data and additional images available on request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all information provided. Also, please visit our website at Nodpfxow Tr Ulj Aanodf

Condition: excellent (used), Labeller / Labelling machine Ndedpfod Rbx Tjx Aanjf Wet glue labelling machine Langguth E 32 / R-315 container size 2 - 30 l incl. glue pump oscillating magazine with single stroke and handle guide various format parts available very good working condition, directly from production!!!

Condition: excellent (used), Year of construction: 2014, operating hours: 2,050 h, functionality: fully functional, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300S-H Year of manufacture: 2014 Spindle hours: 2,050 h Travels: X-axis: 695 mm Y-axis with stroke: +150 / -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Total number of tool stations: 40 Equipment: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measuring with Renishaw probe for X/Z axis Measuring in Y-axis, including inclined-axis measurement mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Hollow clamping cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed oscillation Simultaneous 5-axis machining software package Chip conveyor Coolant tank with high-pressure pump 70 bar Nodpfxjx I D Ubs Aanodf

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable Njdpfx Aeu Ictnoanjdf - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: Nedpexr Txnofx Aansdf 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco smartroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Smartroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Ndedpfx Aaoxzi S Nenof Working height / feed table height: 880 mm Location: Supplier

Condition: used, Year of construction: 2020, operating hours: 823 h, Equipment: all wheel drive, Telescopic Boom Lift Zoomlion ZT22JE * Working height: 24.4 m * Platform height: 22.4 m * Lateral outreach: 17.9 m * Telescopic steel construction * Powered by 80V electric motor * 4x4 all-wheel drive * 2 driving speeds * Tyre size: 355/55D625 * Non-marking tyres Ndedpfsw Hvvbjx Aansf * Tread depth: 14–20 mm * Wheelbase: 2500 mm * Drive configuration: 4x4 * Oscillating axle * Overall dimensions: 11400 x 2500 x 2770 mm * Weight: 12,900 kg * Basket load capacity: 454 kg * Rotating basket * Hydraulic jib: 1840 mm * Basket in steel construction * Basket dimensions (L x W x H): 2360 x 850 x 1100 mm * Basket and ground controls * Clean machine * Videos available via WhatsApp at Detailed data and additional images available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for all details. Feel free to visit our website.

Condition: ready for operation (used), For sale: an indestructible Makita carpentry milling machine, Model 2516, with as-new cutters for dovetailing and rebating. Technical data: - 1430 watts - 110/230 V transformer voltage - 12,000 rpm The milling depth is 60 mm. Beams up to a width of 320 mm can be clamped. Naturally, a depth stop is included, which can be quickly and tool-free adjusted. The hand crank allows for fine adjustment of the position to be mortised. Because the milling machine clamps onto the beam, unlike certain machines from other well-known manufacturers, there is no risk of plunging in crooked or at an angle. With a hand lever, the mortiser can move along the beam, allowing for very precise positioning of the mortise. As seen in the pictures, the machine is in excellent condition, both technically and visually. The construction is robust and well-engineered. Nedpfed Tdx Dex Aansdf International shipping is possible.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: Ndsdpfxsxn Ifuj Aanof 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface Ndsdpfx Aaeif Ek Renjf • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Nodpfjfnlkwex Aansdf • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function Nsdjwgc I Repfx Aansdf • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.