Used Paint Mist Extraction for sale (7,673)

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Pedpfx Ageylb Ixo Togi Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2025, condition: new, The PR EXC extraction arm is manufactured in accordance with the requirements of ATEX Directive 94/9/EC concerning equipment intended for use in potentially explosive atmospheres. The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts. The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation. Application The design and features are unique, as highlighted: Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity. The ATEX environment PR arm is designed according to Fumex’s core principles: Support arms positioned externally Technical Data Length – 3000 mm Dimensions – Ø 160 mm Pgedpfx Aeygurmeg Tsi Marked EX II 2 GD Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.

Condition: used, total height: 2,000 mm, total length: 1,200 mm, total width: 600 mm, Empty weight: 70 kg - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 1 - Filter length [mm]: 1200 - Filter diameter [mm]: 380 - Filter surface area [m²]: 2 - Connection diameter [mm]: 180 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 1.5 - Collection bags: Yes - Number of bins/bags [pcs]: 1 Pgodpfxoymlppj Ag Tsi - Extraction: Overpressure installation - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 1200mm x 600mm x 2000mm (l x w x h) - Transport weight [kg]: 70kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, working width: 250 mm, Brushing Machine / Brushing Automat Manufacturer: Ceetec Model: A 250 Automatic brushing machine with brush application system Workpiece dimensions: Max. width: 250 mm Max. height: approx. 100 mm Length: from approx. 800 mm The painting machine is suitable for the application of paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Pgodpfx Aoyuaptog Toi Technical specifications: - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating distributor brushes on 8 axes (standard nylon bristles) for four-sided application of coating materials Feed speed adjustable via feed roller, approx. 16-45 m/min. Capacity: approx. 960 – 2,500 meters/hour Power supply: 3 × 380 V EU Machine weight: approx. 350 kg Machine will be cleaned and technically inspected before delivery. All hose connections, the diaphragm, and the set of brushes will be renewed! Delivery time: approx. 3-4 weeks

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale is a 3-axis CNC machining center from Ingersoll, model OPS 800. This machine is ideal for the production of graphite electrodes thanks to its integrated high-speed spindle. The machine has been dismantled, and individual components such as the CNC control, extraction unit, spindle, and operator panel are offered for sale. Please let us know which parts you require so we can provide a tailored quote. Technical Specifications: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 stations Tool holder: HSK 63 Including: Graphite extraction Chip trays Cooling system Tools not included Alternatively, the 3-axis Ingersoll OPS 800 CNC machining center is also available fully assembled, fully operational, and ready for immediate use. Podpsuu Rthefx Ag Togi Technical specifications: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 stations Tool holder: HSK 63 Including: Graphite extraction Chip trays Cooling system Tools not included Transport and loading can be organized throughout Europe at an additional cost upon request. All prices are subject to VAT. Inspections are possible by appointment. Contact us—our team will be pleased to assist you. Trade-in or exchange is possible! Machine purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your operations? Or are you interested in selling your own? For further information or to get in touch, please visit our website.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Pedpfx Aot Tyqmjg Togi Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 Psdpfx Ajrfcpmeg Togi The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Standard Equipment Polyester filters with 5-micron efficiency Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Pgedpfx Agoup Df Te Tji Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, We offer this used Venjakob LT - Coolack TA painting unit, manufactured in 2000. Type: LT - Coolack TA Serial No.: A 00 02 004 / Pos 0200 Year of manufacture: 2000 Spraying medium: Water-based paints Incoming air pressure: 6 bar Max. spraying material pressure: 180 bar Pjdeymtikspfx Ag Tjgi Operating speed: 8 - 40 m/min Equipped with a cooling wall for economical paint usage Two automatic conveyors Paint pump If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET Pgedpfxsyrqnze Ag Tji The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Pgedpfx Ageytgpqj Toi

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow Pedpfx Aevzqtxog Togi a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Pgjdsxrpmzspfx Ag Tsi The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation. Pgedpfx Agoxm Twts Tei

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm Pgjdpjwbtvusfx Ag Toi - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm Psdpfou Afu Rjx Ag Tsgi 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers Pjdoyknluepfx Ag Tjgi - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose Pjdpfspyk Nfex Ag Tegi -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500 mm -Number: 20 hoses available -Price: per piece -Weight: 1.6 kg/piece

Condition: used, Year of construction: 2014, Exhaust fan model: HERDING COMP 1500-8/9 SB – 4 identical units Pgedpfx Ajwu Dnbjg Tsi Year of production: 2014 good condition Price: 5,000 euros/unit

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, pressure (max.): 448 bar, WIWA Airless 28064 Delivery rate DH: 153 cm³ Transmission ratio: 64:1 Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Pedpfx Agsyqx Utj Tegi Weight: 80 kg Serial no.: 209981-002-2018 Further information available on request.

Condition: excellent (used), Year of construction: 2008, Air Plants 'CEF 3 - 7.5Kw' Single bin dust extraction / Filter unit. UK £1950 + VAT. Pedjyvvdqopfx Ag Togi This unit has been used for fine dust only and has had little use over the years. In excellent condition and immediately available.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,100 mm, total length: 1,500 mm, total height: 2,400 mm, 🇬🇧 WHEEL PAINT STRIPPING TANK — TOP SALES | ULTRA PREMIUM BUMEX Sp. z o.o. — Industrial Chemical Stripping Technology Professional industrial stripping tank designed for intensive chemical removal of powder coatings, industrial paints and solvent-based coatings from aluminium and steel wheels as well as various metal components. Engineered for maximum process efficiency, operational safety and long-term continuous industrial use. Technical Data Working basket dimensions: 1200 × 1200 × 700 mm (simultaneous processing of up to 8 wheels). Chemical capacity: approx. 1200 litres. Construction materials: process tank — acid-resistant stainless steel AISI 304, external housing — stainless steel. Thermal insulation: Pedpfofmf Izjx Ag Tegi fully insulated tank — 50 mm (high temperature stability and reduced energy loss). Standard Equipment ✅ indirect heating system via oil heating jacket for uniform temperature distribution, ✅ automatic heating medium temperature control, ✅ ceramic heating elements in acid-resistant protection tubes — 4 × 3.5 kW (14 kW), ✅ mixing system supporting uniform chemical circulation throughout the tank, ✅ fully stainless steel process basket, ✅ heavy-duty loading frame for safe lifting and lowering of the load, ✅ industrial control panel with LED status indicators and safety protection systems, ✅ fully enclosed stainless steel construction resistant to aggressive chemical environments. Key Advantages ✔ uniform heating of the entire chemical volume — no local overheating, ✔ high process efficiency with optimised energy consumption, ✔ designed for continuous industrial operation, ✔ excellent chemical and thermal resistance, ✔ ergonomic loading of wheels and large components. BUMEX Quality Standard CE conformity, full technical documentation, manufacturer warranty — 12 months, warranty and after-sales service, professional technical consulting. Commercial Terms ✔ short delivery times, ✔ customised configurations and dimensions available, ✔ own transport — individually priced, ✔ VAT invoice provided. BUMEX Sp. z o.o. — Industrial solutions engineered for reliability, safety and long-term performance.

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Pgodpfxoyibg Tj Ag Tji Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Pgedpfx Agsiu Hq Do Tsi Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Year of construction: 2026, condition: used, functionality: fully functional, Passenger Car Paint and Drying Booth DURST / CMC Concord – 26,000 m³/h – modernized – ready for operation Manufacturer: CMC / DURST Paint Systems Model: Concord Cabin year of manufacture: 1998 Modernization: 2016 For sale is a professional passenger car paint and drying booth from our bodywork and paint workshop. The unit is still in daily use and can be fully tested on-site. The sale is solely due to a new investment in modern paint systems. Technical Data Internal cabin dimensions: Length: approx. 7,000 mm Width: approx. 4,000 mm Height: approx. 3,000 mm Pgjdpfx Aoyrxy Seg Toi External dimensions: Length: approx. 7,100 mm Width: approx. 4,100 mm Height: approx. 3,800 mm Airflow Capacity Supply air: 26,000 m³/h Exhaust air: 26,000 m³/h Air changes: approx. 310 air changes per hour Fans: Radial fans Motor output: 7.5 kW each Heating system: Gas surface burner Heating output: approx. 260–300 kW Maximum drying temperature: 80°C Fuel Originally natural gas Currently converted to LPG (liquefied petroleum gas) Electrical Data Connected load: approx. 20 kW 400 V / 50 Hz Equipment Spray and drying mode Automatic switch-over between spraying / drying Frequency converter for fans Temperature control 0–100°C Ceiling filter pressure monitoring Ceiling filter system Floor grid extraction Automatic run-on timer Operating hours counter Burner safety shut-off Explosion-proof emergency button Control cabinet with digital display Complete supply and exhaust units Fresh air and exhaust air ducts Condition Unit is fully functional Still in operation Inspection and functional test possible at any time Delivery / Dismantling Unit can be inspected by arrangement Dismantling and transport by purchaser Forklift assistance can be provided if required Location Germany 35582 Wetzlar