Used Paint Roller for sale (12,540)

Condition: used, Spray booth water stabilizer Technical data: - Agitator - Pump - Filling neck, Ø 9 cm - Thermostat display Rcsdpfx Aoiu Hwujirsh - Level indicator - Ø 176 cm, H: 67 cm, thickness 3 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, fuel type: diesel, operating hours: 5,857 h, total width: 2,550 mm, fuel: diesel, Key features Internal reference: 26028T Chassis number: JKC 840 7607 Vehicle model: 2000 W 602 BD Combination roller / Swiss-Vehicle Vehicle make: Other Product category: Roller Condition: Used Hours: 5857 Fuel: Diesel Rjdpfx Aisz Hpu Sorjch Suspension: Steel-Steel Hydraulic system: Additional hydraulics Axles & Tires Axle 1: 13.6-28/8mm Number of axles: 1 Weights & Dimensions Vehicle width: 2550

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment Rsdpfxoz Ikyrj Airjch • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: good (used), functionality: fully functional, roll diameter: 25 mm, roll width: 25 mm, roll pitch: 28 mm, total width: 35 mm, total height: 35 mm, total length: 2,475 mm, conveying length: 2,475 mm, construction width: 35 mm, construction height: 35 mm, Item sold as a bundle of 100 pieces. Rcsdpfx Aiexrt Hfereh TAF item number: 1000004157 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: approx. 2,475 x 35 x 35 Side width in mm: 35 Side height in mm: 25 Conveyor length in mm: 2,475 Conveyor width in mm: 25 Roller type: plastic Rollers per axle: 1 piece Roller pitch in mm: 28 Roller diameter in mm: 25 Drive: gravity Weight in kg: 1.85 Condition: used / fully functional Function test: OK

Condition: used, offer consists of: New roller (knurled part 810mm) - for MBO folders working width 78cm - 435€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Rodpfx Aijxr Ag Ierech

Condition: used, offer consists of: KL 112 roller - for Herzog + Heymann folders working width 35cm - 325€ / pc. Rcedpfoxr Ag Uex Airjh We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, functionality: fully functional, power: 64 kW (87.02 HP), overall weight: 10,400 kg, empty load weight: 7,435 kg, Year of construction: 2011, operating hours: 1,100 h, HAMM DV65 VO tandem roller Year of manufacture: 2011 1,100 operating hours 7,435 kg - 10,400 kg Spreader connection Edge cutter wheel All steering modes Working width up to 275 cm Rjdpjykn Ntjfx Airjch

Condition: used, functionality: fully functional, power: 14.8 kW (20.12 HP), overall weight: 1,830 kg, empty load weight: 1,500 kg, Year of construction: 2013, operating hours: 4,800 h, HAMM HD 10 C VT combination roller Year of manufacture: 2013 4800 operating hours 14.8 kW Kubota engine Rjdpfx Ajykurhoirjch 1500–1830 kg Edge cutter wheel Sprinkling system

Condition: used, functionality: unexamined, Ferwood code: RU0011670 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 280KG - 940X91X30 Rcjdeya Dchjpfx Aireh

Condition: used, functionality: unexamined, Ferwood Code: RU0008671 - Dimensions: 6500X1100X250 mm - Rollers L=600 mm - Condition: Used - Functionality: Not tested - Compatible machine: AUTOMATED LOADING AND UNLOADING HOMAG - BIESSE - SCM - IMA. If interested, we offer an overhauling service. Contact us. Rodpfx Ajv Hglzjiroch

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Used roller conveyor from the manufacturer Mannesmann Demag 3m straight pieces, come from a 2-story transport system. 1 piece 3m long; Negotiable price for larger purchase quantities!! Rsdpfxswliuze Airech Other parts also available, please ask.

Condition: used, TECHNICAL SPECIFICATIONS: - length: 9200 mm - roller width: 800 mm Rcjdpfxozv Tkle Airsh - roller diameter: 135 mm - four ejector chains - distance between chains: 1900 mm

Condition: new, Year of construction: 2026, The brass wire brush roller for the CORMAK MM3156C grinder is a durable and effective tool designed for cleaning and surface treatment of metal components. Made of high-quality brass wire, it ensures precise and safe operation. Thanks to the use of brass wire, the brush is safer for more delicate components than conventional steel wire brushes. It is ideal for restoring parts, preparing surfaces for further processing, and lightly finishing components. Easy installation and solid construction provide comfortable and precise operation in all workshop conditions. Rodpfx Aszzw Theirech Applications: removing rust, paint, and deposits from metal surfaces, cleaning welds and edges, preparing surfaces before painting or soldering, polishing metal components, gentle treatment of soft metals and alloys where a steel wire brush could damage the surface.

Condition: used, Used Item Description: - On wheels - Number of compartments: 20 - Compartment width: 7 cm - Usable height: 236 cm - Dimensions: 255x225x80 cm Rodpozyyzrsfx Airsch

Condition: used, Used Item Description: - on wheels - Number of compartments: 20 - Compartment width: 7 cm - Usable height: 236 cm Rcsdpfszyyz Ssx Airjh - Dimensions: 255x225x80 cm

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Length 12.20 m. Roller length 1.40 m. Redpozumy Rofx Airech Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Condition: used, Year of construction: 2021, operating hours: 370 h, * Roll-over protection structure (ROPS) * 2 vibratory rollers * Irrigation system ----Vehicle number 12417 Rcjdozv Df Hopfx Aireh -----Errors and prior sale excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 15 kg, arm reach: 2,000 mm, controller manufacturer: Chiehey, VR tracking principal. Calibrate a tracked teaching receivers on paint gun, record the operator's motion, then replay the path with the robot. Validate the coating result and save program for reuse. Rcsdjz E N Nmepfx Aireh

Condition: used, Year of construction: 2025, operating hours: 496 h, * Immediately available in stock * Takeuchi TL 12 V 2 - Compact tracked loader * Joystick control * 2 speed travel settings * Rearview camera * Auxiliary hydraulics Redpfx Ajz N E N Soirjch * High-flow hydraulics * Electrical wiring harness * Hydraulic quick coupler * Parallel linkage * Heater & air conditioning * Cab door * Radio * Bucket & pallet fork * 4-cylinder Kubota turbo diesel engine * New UVV inspection * "Trade-in of your used machine possible" * All available Bobcat attachments can be provided * Financing available upon request * The information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, and data transmission errors / subject to change. Financing / leasing / hire purchase possible!

Condition: like new (used), functionality: fully functional, Used Ercolina CE40MP2 profile rolling machine for sale. We are offering a used Ercolina CE40MP2 profile rolling machine in good and working condition. The machine is suitable for rolling and bending various profiles and tubes. It can be used both horizontally and vertically. Technical specifications: * Number of driven rollers: 2 * Shaft diameter: 40 mm * Standard roller diameter: 165 mm * Capacity for round tubes: up to approx. 60 × 2 mm * Capacity for angle profiles: up to approx. 38 × 38 × 5 mm Rjdpez Hqi Dofx Airjch * Rolling/bending speed: approx. 2.5–5 m/min * Motor power: 0.75 kW * Top roller adjustment: manual * Machine position: vertical and/or horizontal * Power supply: 400 V * Control: electric foot pedal * Standard rollers: included * Extra rollers: 1/2", 1 1/4G and 1 1/2G The machine is available immediately and can be inspected and tested by appointment at our location.

Condition: used, Year of construction: 2017, operating hours: 1,004 h, Hamm HD8VV roller, manufactured in 2017, with only 1,004 operating hours! ---- * Manufacturer: Hamm * Type: HD12VV * Year of manufacture: 2017 * Operating hours: 1,004 * Kubota diesel engine * Operating weight: 2,695 kg * Power: 22.9 kW * Water sprinkling system * First owner * Good condition * Working width: 1.2 meters * Video available upon request (WhatsApp Erik) * Price: 12,900 euros, net + 19% VAT Rodpfx Aijz R Hzrorech ---- For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Rcjdpfoy Dpfwsx Airoh Condition: very good

Condition: new, functionality: fully functional, machine/vehicle number: G48C07, overall weight: 50 kg, operating pressure: 276 bar, compressed air connection: 7 bar, Air-assisted 48:1 Merkur complete system: - Incl. Airmix spray gun PerformAA 50 - Chassis mounting - Incl. gun-air-material hose, material filter - Permissible material operating pressure: 276 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 4.5 l/min. Rcsdpfoz Ndb Esx Airsh Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to third countries. Delivery conditions and shipping costs based on individual effort and agreement. The sale is made with exclusion of warranty. Are you looking for other machines or similar products? Please contact us. At Oltrogge, we regularly have a large number of new and used machines as well as other products from our technical range available. We will gladly check whether we can offer you a suitable alternative.

Condition: new, neu Rcjdpsyq Spksfx Airoh ca. 8 Wochen ab Auftragse Deutschland 4776 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2550 mm 250 mm digital readout adjustment by handwheel pneum. brake material depth stop with 12 times ball bearings on generous large dimensioned guiding profile FURTHER LENGTHS: 2 meter € 3.801,- 4 meter € 5.319,- OPTIONS: Measuring systm with 1/10 mm readout Z 58 with magnetic polring and sensorhead SZ 09 € 883,- material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 528,- pneum. arm retraction (10 mm discharge stroke) of sprungmaterial depth stop (SZ 05) SZ 07 € 441,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 122,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Rcjdpfx Aoz Nxk Noireh Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive