Used Painting Room for sale (4,306)

Condition: new, Year of construction: 2026, 600 mm 500 mm 400 mm 1000x500 mm Gedpoyiu Rzsfx Aa Sjua 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Gusdpfx Aasw I Uygj Ssa Availability: short-term Location: Hochheim

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone. Gedpfx Aex H Rhrea Ssua

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm Guodpfsvylkcsx Aa Sea z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment!

Condition: good (used), Year of construction: 2012, I. System Concept of the New Painting Workshop Based on Drawing: 12-137-010a System Description: The system is designed for painting parts of IKEA garden furniture. Dimensions of individual parts: - Length: max. 3,500 mm - Width: max. 100 mm - Height: max. 2,200 mm Part Hanging Arrangement: - 2 chairs/1 table (220 per beam, stacked one above the other); paint application must be adjusted to prevent dripping onto the parts. Traverse (Beam) Length: - 4,000 mm Number of Traverses: - 228 pcs Gjdoylhxqopfx Aa Sjua Conveyor Speed: - 5 m/min Capacity: - The system is designed to paint 300,000 pieces of garden chairs per year, calculated as follows: - 7,200 single parts per 2 shifts (one chair consists of 6 single parts) - 1,200 chairs per 2 shifts = 600 beams in 2 shifts - 600 beams x 1.2 min = 720 min = 12 hours effective production > 16 hours (2 shifts) – calculated based on 6 production hours per shift Paint System: - Intended for use with low-solvent (VOC-compliant), water-based paint materials from the respective manufacturer; non-combustible and non-reactive with other paint substances. - Coating process includes one cycle for both flow-coating and top-coating.

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 1,300 mm, Manufacturer: Cefla - Type: EASY- - Year of manufacture: 2001 - Working width: 1300 mm - Left-hand operating side - Actual condition, machine not refurbished - Duo construction spray gun drive - Dry extraction - Exhaust capacity: 12,000 m³/h - Belt conveyor system - Infinitely adjustable feed speed: 2 - 8 m/min - Belt cleaning via roller cleaning system - With paint recovery system - Number of spray guns installed: 4 per paint circuit - Spray gun type: Kremlin AVX - Airmix spraying system Gujdoylhppopfx Aa Ssa - Spray guns with adjustable height - Number of paint pumps: 2 pcs. - Paint pumps by Kremlin - Ceiling-mounted fresh air filter - Suitable for water-based paints - Used machine, good condition.

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 1,300 mm, - Manufacturer: Cefla - Type: EASY- - Year of manufacture: 2001 - Working width: 1300 mm - Right-hand operating side - Actual condition, machine not refurbished - Duo pistol drive construction - Dry extraction Gsdpfx Asylhm Uoa Sjua - Extraction capacity: 12,000 m³/h - Conveyor belt system - Steplessly adjustable feed speed: 2 - 8 m/min - Belt cleaning via roller cleaning system - With paint recovery - Number of installed spray guns: 4 pcs. per lacquer circuit - Type of spray gun: Kremlin AVX - Airmix spray system - Height-adjustable spray guns - Number of paint pumps: 2 pcs. - Pumps by Kremlin - Ceiling supply air filter - Suitable for water-based paints - Used machine, in good condition - Gardina air drying tunnels with additional IR lamps - Additional Gardina GST UV lamp module - 4-roller VenJakob brushing machine at the infeed

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Gedpfx Aajuyh R Aj Ssua Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm Godpfxjxfb H Ts Aa Ssua 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm 1000x500 mm Guedpfjwp Trrex Aa Sja 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm Gusdpewp Tqbjfx Aa Ssa 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drive pinion: 10 teeth Gjdpjyf Aypofx Aa Ssua Chain sprocket: 10 teeth Carrier width: 30 mm Chain link length: 130 mm MACHINE DETAILS Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Gujdpfxeygu Sme Aa Sea Width:6000mm Height:6000mm

Year of construction: 2016, condition: excellent (used), Painting booth Guedpfx Aajygum Ro Sea Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Condition: used, Spray Booth / Drying Booth ARYA PONY L7000 / L6000 – fully functional For sale are used spray and drying booths from the manufacturer ARYA Oto Servis Ekipmanları, model PONY, year of manufacture 2008. The units come from an operational environment and are fully functional. Guedsyniurspfx Aa Soa Technical specifications (depending on the booth): Internal dimensions: approx. 6000 × 4000 × 3050 mm (another booth approx. 6000 × 3070 × 2650 mm) Airflow capacity: 18,000 – 24,000 m³/h Motor power: Supply and exhaust fans each 5.5 kW to 7.5 kW Total power consumption: approx. 8 – 17 kW Burner heating output: approx. 200,000 kcal/h Temperature range: Spraying: approx. 20 °C Drying: up to 60 °C Connection: 400 V / 3~ / 50 Hz Lighting 230 V Thermostat: 20–60 °C CE / TSEK certified Condition: used, age-appropriate technically sound ideal for automotive painting, smart repair, industry, or workshop use Other details: Inspection possible by arrangement Dismantling and transport to be carried out by the buyer Sale without warranty, private/business sale 📍 Location: Wörrstadt 💶 Price: negotiable If interested or if you have any questions, please get in touch.

Condition: good (used), Year of construction: 2015, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Guedpfovmtw Rjx Aa Sea Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Gusdpfxexr Am Uj Aa Sja Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Automatic door destacker, door by door Automatic painting robot with spraying Guedpfsyrr Dkex Aa Sea Door stacker onto trolleys Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: Gusdpfjvt Tn Ajx Aa Soa - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Gjdjvunrfjpfx Aa Soua Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Condition: excellent (used), Year of construction: 2015, Brand: Makor Gsdpfx Aaeiu Hbne Seua Type: Robospray Twin Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Dimension W: 4600 mm Dimension H: 4500 mm Includes - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Godjw Tl S Djpfx Aa Soua

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm Gsded Hl Stopfx Aa Seua speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Guedpfx Aaervi Ris Sja

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm Gedpfx Aasig A Ere Seua total power requirement / kW weight of the machine ca. 950 KG