Used Painting for sale (3,884)

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Bsdpfxew Tl S Dj Amnjdd

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. Bdedpfotu Hpqsx Amnod The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. Bdodpfx Aotu H Avsmnod However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. Bdedpfjtu H Hcsx Amnsd However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Bjdpfxswydgzj Amnjdd

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Bdjdstpp H Eopfx Amned

Condition: used, used, good conditionnumber of tiers 14tier depth approx. 550 mmspace requirement approx. 1200 mm x 800 mm x 175 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Bodpfxjwi Rn Dj Amnedd

Condition: new, - NEW -- stable tubular frame construction- Extendable from 200 to 2000 mm andlockable to any desired width- 17 shelves on both sides possible- 4 polyamide castors, capacity 400 kg- Supporting tubes galvanizedTechnical specifications:Support pipe length: 650 mm- extended to: 1150 mmLight intermediate dimension of the tubes: 60 mmLength: 200 - 2000 mmDepth: 870 - 1180 mmHeight: 1855 mmItem No. 13-03000001 Bsdpfx Amsvwfvmsnedd

Condition: new, The inexpensive shelf trolley Ecoflex isfor space-saving and gentle storageof painted workpieces. ByThe Ecoflex can also use its 4 swivel castorsTransport of workpieces can be stable tubular frame construction letscan be adjusted from 200 to 1500 h its 17 plastic-coatedSupport tubes on each side, the trolley canWeights up to 400 kg with a uniformabsorb distributed load. The pluggable onesSupport tubes can optionally be removedand can be reinserted on the backwill. When not in use, theAssemble shelf trolleys to save gth: 200 - 1500 mmDepth: 870 - 1180 mmHeight: 1855 mmSupport tube length: 650 mmClear intermediate dimension of the tubes: 70 mmLoad capacity: 400 kg Bdedpfjvwf Ehox Amnsd

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Bdjdpfervi Rijx Amned

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Bdsdpfx Amoxa Hzxjnsd Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. Bdjdpfx Amjxa Hx Rensd The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. Bodpfxjwzl Hxs Amnjdd * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS Bdedpjwzmcbsfx Amnjd In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Bjdpfxoxa H Ewe Amnsdd (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, Bdodpjiv Huwjfx Amned 4 double strokes per 1 liter of material, with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, available from warehouse in Seevetal, subject to prior sale.

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm Bdsdpfx Asxiy Htomnod - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: new, Year of construction: 2024, 4 UNITS AVAILABLE FOR IMMEDIATE DELIVERY with 15 support rails (rail surface: edge trim) Dimensions: L x W x H 910 mm x 700 mm x 1850 mm Shelf depth: 510 mm Shelf width: min. 500 mm - max. approx. 2000 mm Bsdpfx Aogmht Ssmnedd Distance, clear width from the shelves: approx. 78 mm Load capacity: max. approx. 600 kg evenly distributed Load capacity/calculation: approx. 40 kg Weight: approx. 90 kg

Condition: good (used), We offer guns , cabins , complete plants , used and reconditioned Bsdpfxeri R Rls Amnedd

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Bdjdpfjxtnfrjx Amnjd Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available

Condition: good (used), Year of construction: 2016, Corob D300 Automatic Paint Dosing Machine Bdjdjv Dx Nyepfx Amnod Corob Hydraulic Can Table Container Stand D300

Condition: used, machine/vehicle number: 008157, Max. working width: 250 mm Max. working thickness: 80 mm Extraction system: dry Number of painting guns: 4 Bdodew Sdu Uspfx Amnod Use: for paint Number of painting circuits: 1

Condition: good (used), Painting booth with suction device and cabinet Article: Spray booth with extraction unit and cabinet Dimensions spray booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colours: green and black Bdodpog I Dhgofx Amnjd Condition: used  Complete factory locker, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Spray booth water stabilizer Technical data: Agitator Pump Filling spout Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 Thickness 3mm More articles - new and used - you will find in our store! Bdedjiu Hwuspfx Amnjd International shipping costs on request!

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. Bsdpfjxmf Svox Amnjdd +FITTINGS+AIR/PRODUCT HOSE