Used Panel Beam Saw for sale (20,979)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Hnodpfxotk It Ss Aabou Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. Hnsdpfx Ajxfvp Asabju The machine will be available from 02/03/2026.

Year of construction: 2011, condition: ready for operation (used), This HOLZMA HPP 250/38/38 panel saw was manufactured in 2011. It features a main saw motor of 9.2 kW and a scoring saw motor of 1.1 kW. It can handle a maximum panel width and length of 3800 mm. Equipped with 8 clamps and 3 air cushion tables, it runs on Windows XP with CADMATIC 4 software. Contact us for more information about this machine. Application Types Sawing (Wood) Hnjdpfxexcb R Tj Aabsu

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Bundle Height and Panel Thickness Maximum bundle height (P): 80 mm Minimum panel thickness (P): 3 mm Hnedpfx Aajw Upvisbou Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Information Maximum clamp opening (K): 90 mm Working height: 970 mm Total height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at the infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw unit forward speed: 5 - 120 m/min Saw unit return speed: 120 m/min Infeed forward speed: up to 80 m/min (Europe: 25 m/min EN 1870-13) Infeed return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 04946, cutting length (max.): 4,350 mm, saw blade diameter: 400 mm, cutting width (max.): 4,455 mm, saw blade bore: 80 mm, TECHNICAL DETAILS Max. cutting length: 4,350 mm Max. cutting width: 4,455 mm Hodpsxcn Tujfx Aabjnu Max. cutting height: 110 mm Saw blade bore diameter: 80 mm Max. saw blade diameter: 400 mm Scoring unit: Yes Max. feed speed: 25 m/min MACHINE DETAILS Dimensions Dimensions (L x W x H): 7,600 x 1,400 x 1,800 mm Transport packages: 5

Condition: reconditioned (used), cutting dimensions 4200 mm x 2200 mm Hjdpfxsw Ug Aaj Aabonu Blade diameter 250 mm cutting thickness 60 mm

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Hnjdpfx Ajxhg Ibsabeu Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: good (used), Year of construction: 2003, Used BIESSE SELCO EB70 Hjdpfx Aexhctmeabenu - Year of manufacture: 2003 - Available from November 2025

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Hnsdpjxf Idxofx Aabsu Year of manufacture: 1998 With front and rear feed Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Hnsdoxiwvlopfx Aabou Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0-240-14-5243, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Max. cutting width: 4,300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available Hnsdpjxcnv Ajfx Aabeu CE marking present

Condition: used, Year of construction: 1989, -Used machine- Year of manufacture: 1989 Condition: Refurbished and operational Fully automatic, vertical design, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, Hnodexavq Nspfx Aabou With ALU folding stops and ALU intermediate support, Prepared for Supercut With completely new housing including: - Pneumatics (plunge function) - Riving knife - Pressure shoe - Cover - V-belt pulley

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Optionally available with a new Felder RL 200 extraction system from 2024. Hedpsxadn Nofx Aabonu This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: excellent (used), Year of construction: 2011, Maximum cutting length: 5300 mm Maximum cutting height: 2000 mm horizontal/2150 mm vertical Maximum cutting depth: 55-80 mm Motor: 3 kW Weight: 990 kg Saw blade diameter: 303 mm The machine is equipped with the Advance clamping system for horizontal and vertical splitting by one person without intermediate removal of workpieces. Very well maintained condition All documents, operating instructions, manuals, etc. available Hedpfxjxgqx Us Aabonu

Condition: new, Year of construction: 2025, Brand new vertical panel saw for manual cutting of sheet materials. All easily machinable materials such as solid wood panels, laminated wood panels, formwork panels, and all wood-based materials such as MDF, fiberboard, and particleboard can be cut and divided by sawing. Maximum cutting area: 4,200 mm x height 2,200 mm Maximum horizontal cutting height: 2,070 mm Manual saw unit rotation Maximum panel thickness that can be cut: 60 mm Saw motor drive power: 4.5 kW Hnodpfx Aaoxc T T Tebou Saw blade diameter: 250 mm Compressed air requirement: 7 to 8 bar Dimensions approx. 5,300 mm x 1,500 mm x H 2,690 mm Weight approx. 700 kg Optional equipment available: scoring unit, angle cutting device, chip extraction system, etc.

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 Hnedpfx Aaot Ah Nisbsu No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: good (used), Year of construction: 2005, - Used machine - Year of manufacture: 2005 - Motor power: 4.4 kW / 400 V Hnjdpexd Rytofx Aabsu - Cutting length: 5300 mm - Cutting height: 2240 / 2100 mm - Cutting depth: 80 mm - Saw blade diameter: 300 mm - Automatic plunging and sawing - LxWxH: 6612 x 1361 x 3018 mm - Ex stock, dismantled and loaded

Condition: used, Year of construction: 2010, functionality: fully functional, Complete Automatic System Beam Saw Giben Prisma 3000 , Cutting 3800 Hnodpfxev H Ufvs Aabou + Systraplan , Professional Stacking and destacking System , Complete line , 24m * 10 m , 2 places for loadin palets by forklift , Capacity about 20-25 palet places , * 5 palets in one place, about 100 pallets , Speed 120m/min longitudinal , 80 m/min * short side , Load capacity of the vacuum system 500 kg , More pictures and videos avilable ,

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Hnjdew Tfxwjpfx Aabeu Availability: Short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 17P810781240000, CIRCULAR PANEL SAW, TILTABLE BLADE, model UNICA 400, GRIGGIO - Italy Hnjdpfx Aow Tkgmsabsu Technical specifications: - Carriage dimensions: 385×3,200 mm - Blade tilting range: 0 - 46º - Maximum main saw blade diameter: 400 mm - Maximum cutting height: 130 mm - Cutting height at 45º: 90 mm - Height of the main blade above the table when fully lowered: 25 mm - Saw unit tilting range: 0 - 46º - Maximum rip capacity between blade and fence: 1,250 mm - Two extraction ports, diameter: 80 - 120 mm - Main motor power: 10 HP (7.5 kW) - Main saw speed (3 steps): 3,000 / 4,000 / 5,000 rpm - Separate, externally adjustable scoring unit - Maximum scoring blade diameter: 125 mm - Scoring motor power: 0.75 HP - Scoring motor speed: 8,000 rpm - Rip fence with micrometric adjustment - Net weight (standard machine): 860 kg Machine equipped with: - CE conformity - Scoring unit with independently driven motor; manual adjustment on 2 axes; operational status indication via LED on worktable - Aluminium sliding carriage running on high-precision steel guideways - Carriage can be locked in any position - Carriage with anodised profiles - Very easy changeover of main blade rotational speeds - Rip fence with micrometric adjustment - Fence positioning on movable carriage with automatic height compensation depending on tilt angle - Quick selection of 5 cut sizes using extendable fence - Electric rise/fall for main blade - Saw unit tilting by handwheel - Gravity indicator for angle adjustment - Automatic star-delta starter - Upgraded 10 HP motor Excellent condition, supplied with a set of blades Operating hours: 300 h EXW price: 9,000 EUR net, excluding VAT

Condition: excellent (used), Year of construction: 2013, operating hours: 3,081 h, Cutting length 4300 mm Cutting width 4250 mm (program fence travel) Hnedpoxdt Hcsfx Aabsu Main saw motor 18 kW Scoring saw motor 2.2 kW THIN PANEL CUTTING PACKAGE LABELING PACKAGE POWER CONCEPT CONTROL: POWER CONTROL: CADmatic 4 – Professional DATA INTERFACE TO STORAGE SYSTEMS

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm Hodpfew Nau Sex Aabenu – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, saw blade diameter: 315 mm, space requirement length: 6,000 mm, total height: 2,600 mm, Standing panel saw Striebig, type 6220, wall-mounted, condition very good Hnsdpfxexc Uf Rj Aabeu

Condition: used, Used Machine Used Holz-Her Type 1211 Vertical Panel Saw Older model; only suitable for rough rip cutting MNo.: 360726 Hedewka Ngspfx Aabenu Technical Specifications: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Max. saw blade diameter 300 mm Motor power 4 kW Availability: Short term Location: Röllbach

Condition: used, functionality: fully functional, - After technical inspection - Condition: very good - Saw for longitudinal cutting, trimming, and shortening of wood or boards. Hedpfx Aaow Iqfxebonu TECHNICAL SPECIFICATIONS: - Saw blade diameter: 400 mm - Cutting height: 80 mm - Min. cutting width between 1st and 2nd saw: 700 mm - Max. cutting width between 1st and 3rd saw: 1900 mm - Cutting width between 2nd and 3rd saw: 1200 mm - Carriage length: 1500 mm - Main motor: 2 x 4 kW - Saw blade height adjustment - Outlet diameter: 2 x 100 mm - Dimensions (L/W/H): 300 x 130 x 110 cm - Weight: ~ 700 kg