Used Paper Bale Press for sale (13,979)

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Hfjdpfsip D Rpex Aa Sjf

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Hfedpfx Ajvtpq Hsa Sef Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: ready for operation (used), functionality: fully functional, pressing force: 38 t, MPC 20 PE compactor container Hfedpfx Aasyiltqj Sef

Condition: used, Year of construction: 2008, Nagel Digifold Creasing and folding in a single operation Feeding: Suction feeder draws paper from below Maximum paper size (mm) L x W: 700 x 358 Minimum paper size (mm) L x W: 210 x 140 Maximum paper weight (gsm): 400 Minimum paper weight (gsm): 100 Max. number of creases per sheet: 9 Max. number of folds per sheet: 2 Hfsdpfxsyhztke Aa Sef Max. number of program memory locations: 9 Min. distance between two creases (mm): 40 Min. distance between two folds (mm): 70 Min. distance from leading edge to first crease (mm): 50 Min. distance from leading edge to first fold (mm): 50 Min. distance from trailing edge to last crease (mm): 50 Min. distance from trailing edge to last fold (mm): 50 Min. fold length (mm): 70 Max. fold length (mm): up to 450 (automatic feeder), up to 1,800 (manual feed) Fine adjustment (mm increments): 0.1 Max. speed (A4 sheets/hour): 5,000+ Dimensions (mm): 1,980 x 655 x 1,265 (L x W x H) Weight (kg): 190 Power supply (V): 220

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Hedpfx Aexmvc Eja Seff Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 69000, input voltage: 400 V, input current: 1 A, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, Professional Prym Fashion eyelet/assembly press, type NE 18/3 K, year of manufacture 2004, in very good and fully functional condition. The press is fully equipped with Prym control, feed/rotation modules, foot control, and safety features. Operation is possible in manual, semi-automatic, and automatic modes, offering flexibility for various applications and production series. Hedjyhnmmjpfx Aa Seff Connection: 3×400 V / 50 Hz. Inspection and testing under power possible.

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition after overhaul, unused. Serviced exclusively by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600–1200 mm. Bale weight approx. 380 kg. Hfjdpfx Aox S Sbdja Sef

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Hfodpfx Aasvvk T Ie Sjf Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Paper drilling machine Nagel Citoborma 290 AB Year of manufacture: 2015 Hfjdpsybbi Usfx Aa Ssf Item no.: L1131 The machine comes from a government authority. Condition: like new. Very low usage.

Condition: new, Year of construction: 2024, functionality: fully functional, OSAMA S2R 1300 roller gluing machine for cold gluing. Hfedjvxai Ropfx Aa Sef Brand NEW. Packed by the producer OSAMA in Italy.

Condition: good (used), Year of construction: 1995, functionality: fully functional, pressing force: 70 t, filling opening width: 1,060 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 23,000 kg, noise level: 85 dB, power: 37 kW (50.31 HP), Used BOA 2060 for sale. The machine is currently stored in Belgium. It has been operational up until now and is currently disconnected. The machine is sold as-is, but a possible overhaul can be offered upon request. Hfjdpeya Uwpjfx Aa Ssf Technical data: Drive: 37 kW Pressing force: 70 tons Bale dimensions: 1100 x 720 mm Number of wires: 4 vertical, 2 horizontal Filling hopper dimensions: 1500 x 1060 mm Bale weight: approximately 500 kg (depending on material) Capacity: up to 14 tons per hour (depending on material) Press weight: 23,000 kg

Condition: excellent (used), Citoborma 280 2 head paper drill with electric foot pedal operation Hfedewptcdjpfx Aa Sof

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Hfodpsiuky Ijfx Aa Ssf

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 Hsdpfjv Ak Npox Aa Soff - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Hedpfsra Nrxsx Aa Ssff Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Hedpfsv Amv Ejx Aa Ssff Year of manufacture: 2012

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Refurbished 12m length Hjdpfxsxfg Sbo Aa Seff Everything in perfect condition Operational Located at company headquarters.

Condition: used, Year of construction: 2019, Chamber Press - Baling Press - Raw Material Press Bramidan X30 AD, used 🧰 Product Features • Manufacturer: Bramidan • Model: X30 AD • Condition: Used, see photos • Color: Orange • Year of manufacture: 2019 • Dimensions: approx. 1760 x 1255 x 2295 mm • Net weight: 1650 kg • Press force: 300 kN • Cycle time: 25 seconds • Power: 4 kW • Voltage: 3 x 230 - 440 V / 50/60 Hz • Noise level: 59 - 60 dB • Bale weight: Plastic up to 425 kg, cardboard up to 350 kg 💰 Price € 8,900 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock Hedpfexvyn Djx Aa Sjff (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions; all prices excl. VAT ex stock.)

Condition: good (used), Year of construction: 1996, 2 pieces Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW Hjdpfx Aaertngcj Soff incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Professional production equipment standing model electric operated - foot pedal triggered heavy duty construction For paper, plastic, textiles, leather - two speed drilling. With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. Hfjdpfx Aev Idfnja Sof We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed.

Condition: used, Year of construction: 1998, pressure:8 t Hfsdjufudwjpfx Aa Sef box opening:750 x 500 mm box depth:450 mm material:Pappe,Plaste - cardboard Feed opening:690 x 500 mm voltage:230 / 50 V / Hz transport measurements machine:900 x 600 x 2150 mm Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Hedpfow E Htujx Aa Soff Machine decommissioned

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. Hfsdpfx Aeyzw U Usa Sof New price: seen for €19,500 Pressure cylinder has been dismantled for transport, inspection possible by appointment. Further presses in stock.

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. Booklet Finisher A-FN13 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Hfsdpfxju Ra Sme Aa Sef Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, This offer is for a used ‘Canon imagePRESS C10000VP’ colour production system Item for sale: 1 x Canon imagePRESS C10000VP with the following specifications: Includes Fiery Server Pro Includes 1 x Paper Deck D1 Includes Stacker H1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Hfodpfxoy Aly Ij Aa Sjf Total: Approx. 9,039,201 pages Colour: Approx. 7,444,138 pages Black: Approx. 1,595,063 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.