Used Paper Drill for sale (7,015)

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Gedpfsy E Eygjx Anxeit Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Gjdsy E Eyaopfx Anxjit Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Gijdpfx Anjy E Ex Njxet Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Giedoy E Ey Hopfx Anxet Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Battery-powered. Gjdpfxoy E Ewle Anxoit Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: good (used), Knorr RLE-3-K Paper Jogger The machine is 100% functional, ready to work. Technical data: Max format: 750 x 850 mm Stack height: 150 mm Weight: 300 kg Power supply: 400 V Air table Possibility of jogging to the right/left Giedpfxey E Ew Eo Anxot Adjustable tilt angle Adjustable jogging force

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7035.46 € 135.78 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm Godpfx Ajy H N A Ienxsit 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 8144.6 € 157.19 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Digital drilling depth and speed display Gjdpfxsy H N Auo Anxsit Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gedpfsy Rznwox Anxoit

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. Gijdpfx Asgq Dl Ajnxet The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: excellent (used), Radial Drilling Machine EMA - arm lenght - 1220 mm - bore capacity in steel (diameter) - 50 mm Gsdpfeh Hnrbsx Anxsit - dimentions: 200X77X240, weight: 2250 kg - accessories included Made in Italy

Condition: excellent (used), Radial drilling machine Brand: UCIMU Giedpfx Ansi If I Roxot Model: MS R1200 Voltage: 380V three-phase Dimensions: 210cm x 90cm x 248cm Dimensions of the vertical row: 55 cm Dimensions of the horizontal row: 76 cm

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Gijdpfx Anjy Eyivjxst Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gedpfxoyilgdj Anxjit

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Gedpfx Ansyrdplexjit Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gedpfxoyub Spe Anxsit

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB Giodox Tp Ahjpfx Anxst MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Godpfxov A Uw Do Anxeit Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg Giedjvn Sv Uopfx Anxst

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Gjdpfx Anjx Sx D Soxeit Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm Gijdpfx Anewyup Tjxot X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: excellent (used), CAMAM MO-4A double-sided oscillating drilling machine Number of spindles per side 3 Tool mounting chuck basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Gedpfx Astp Tnzsnxoit Two pneumatic material presses per side

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Giodpfx Anjvx Aqdjxjt Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Gisdpfxjy N Duws Anxjt Table size 400 x 400 mm Table height 850 mm Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, FEMCO BMC 110 T2 Boring Mill (T-Type Design) – Available for Quick Delivery The FEMCO BMC 110 T2 is a classic boring mill designed for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Technical Specifications: Control System: HEIDENHAIN TNC 7 control system HEIDENHAIN 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 20 bar Tool Changer: 60-position chain magazine with double gripper Chip Disposal: Dual hinged belt conveyor (front and rear) Enclosure: Godpfx Aoxc Hphonxoit Fully enclosed perimeter guarding Spindle Support Bearing: Spindle support bearing ø 250 mm Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Your benefits with JMT: ✔ Official FEMCO distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are pleased to advise you and provide a tailored quotation