Used Paper Embossing Press for sale (13,999)

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Kdodpov U R Agjfx Ab Hor Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Kodpeu Tg Spjfx Ab Hedr Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Wohlenberg 115CutTec Paper Cutting Guillotine Machine in very good condition, ready for production. Available immediately from stock. Description: – Color screen – Handwheel positioning – Optimized cutting cycle – Continuously adjustable clamping pressure – Quick knife change – One-piece machine body = increased stability Technical specifications: Cutting length: 1150 mm Maximum stack height: 165 mm Infeed depth: 1150 mm Minimum cutting width with sheet metal under the pressure beam: 97 mm Kedpfx Abszlaigo Hodr Minimum cutting width without sheet metal under the pressure beam: 30 mm Net weight: 3100 kg

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Kdsdpfx Abezhpa Tj Her Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Year of construction: 2001, condition: ready for operation (used), A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible. Ksdpfx Ajzcp U Isb Hjdr

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine Kdsded Hp Tzepfx Ab Her -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Kdodpfswxb Igex Ab Hsr

Condition: good (used), The HSM 35/2100 is a horizontal channel press/baler for waste materials, including paper, cardboard, film, foam, and rubber. Pressing force: 32 t / 320 kN Pressing cycle time: approx. 34 s Loading aperture: 2100 × 740 mm Pressing chamber: 2900 × 800 × 1000 mm Maximum bale size: 1200 × 800 × 1000 mm Bale weight: approx. 400–700 kg Throughput: approx. 5–10 bales/h Motor: 11 kW, 380 V, 3-phase Feed height: approx. 1200 mm Ksdpfov Alacex Ab Hedr Overall dimensions: approx. 6500 × 1450/1630 × 2300 mm Machine weight: approx. 4500 kg

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Air knife for blowing small debris off the knife Air table Kdjdpfxjzlakds Ab Hsr Photocells Chrome table surface Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Additional rear table guards Weight: 4500 kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface Kdsdpfx Abezlai He Her – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Kdjdpfx Abozt H U Ej Hsr Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm Kdodpst Hw Dwofx Ab Her distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, HSM baling press, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty. Kdjdpfx Abjzt N Afo Her

Condition: ready for operation (used), Year of construction: 2023, number of ink cartridges: 4, color channels: 4, number of print heads: 4, paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (min.): 1 mm, paper height (max.): 1,300 mm, number of feeding trays: 3, counter reading (black): 1,11,572, counter reading (color): 2,96,115, year of last overhaul: 2026, Equipment: auto duplex, brochure finisher, documentation/manual, raster image processor, An authorized Canon Production partner is offering a Canon imagePress V900 (90 ppm) sheet-fed digital press for sale. The printer is in excellent condition and has been under a service contract since February 2023, which is still active. Configuration: Kedpfxozpxy Sj Ab Hodr - CANON ImagePress V900 main unit (90 ppm license) - Multi-drawer Paper Deck-E1 - Booklet Finisher AG1 - Duplex Color Image Reader Unit-P1 - PRISMAsync iPR V900 - Stack Bypass-D1 - Stack Bypass Alignment Tray-D1 - Inline Spectro Counters: Total (All) 535,659 Total (Black/Large) 111,572 Total (Black/Small) 19,160 Total (Full Color + Single Color/Large) 296,115 Total (Full Color + Single Color/Small) 108,812 Total (Black & White / Long Sheet) 1,250 Total (Full Color + Single Color / Long Sheet) 2,352 The printer can be inspected and test prints can be performed at our facility. The printer is located in Riga, Latvia. We will pack it securely for worldwide shipping.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Canon imagePRESS C10000VP Digital Printing Press including Server & Color Management For sale is a Canon imagePRESS C10000VP digital printing press from 2016 in very good, well-maintained, and operational condition. The machine has been regularly serviced by Canon, and the service logbook is available. Ideal for professional digital printing, print-on-demand, brochures, flyers, business stationery, and in-house production. ⸻ Technical Specifications (Excerpt) • Model: Canon imagePRESS C10000VP • Year of manufacture: 2016 • Printing speed: up to 100 pages/minute • Printing format: up to SRA3 • Total click counter: approx. 15.5 million (color + black & white) • Duplex printing, high color and registration stability Kdsdpfxozb Ddhe Ab Hsr • Three-phase power connection required (400 V) ⸻ ✅ Equipment / Scope of delivery • Canon imagePRESS Server B5000 (production controller) • EFI ES-2000 spectrophotometer including case & accessories • Several paper trays / paper decks • Finisher / stacker module • Original Canon control panel • Accessories & cables as shown in the photos (No booklet maker included) ⸻ Condition • Optically well-maintained • Technically functional • Machine runs smoothly and consistently

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Kdedpfx Aszfp Hzob Hor

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Kdedpfxezff Smj Ab Hjr We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Pressing force: 18 tons Weight: 1580 kg This device is used to reduce the volume of waste such as film, paper, etc. Kdodpfx Aov Ai Uqeb Hsr Price: €4500 Aventek MK 2500 Baler This is an industrial baler for compressing waste such as: - Film - Cardboard / paper - Plastics Pressing force: 25 tons Bale weight: 400 kg depending on material Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Motor power: approx. 5.5 kW Year: 2013 Price: €6500 ORWAK 9020 Baler: - Motor 2.2 kW – 380V - Pressing force: 20 tons - Bale size: 1100 x 700 x 800 mm - Bale weight: depending on material, 200-300 kg Price: €5500

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, color channels: CMYK, resolution (max.): 2,400 dpi, paper weight (min.): 50 g/m², paper weight (max.): 350 g/m², paper width (min.): 210 mm, paper width (max.): 330 mm, total length: 1,400 mm, total width: 855 mm, total height: 1,000 mm, type of input current: AC, input voltage: 220 V, For sale: Valloy BizPress 13R, a compact digital press for roll-to-roll label printing, highly productive and designed for print shops and converters seeking professional quality, flexibility, and fast return on investment in short to medium runs. This solution is ideal for personalization, variable data, prototypes, and short series, with no plate costs and virtually instant job changes. The machine is in excellent condition, fully operational, and properly maintained. Viewings while in operation are available without obligation. Reason for sale: reorganization / change in production strategy. -> Key features: - Digital LED toner printing technology (CMYK) - Optional CMYW / white configuration - Resolution up to 1,200 × 2,400 dpi - Constant production speed up to 7.26 m/min - Material width from 210 to 330 mm - Maximum print width: 304 mm - Image repeat up to 1,200 mm - Maximum roll diameter: 450 mm - Substrate thickness: 50 to 350 microns - Quick job changeover, no plates required - Eye-mark sensor - Automatic tension control - Anti-static system and substrate cooling - Excellent color stability and definition - Ideal for variable data printing and customization Ksdpjy Rna Hofx Ab Hodr -> Compatible materials: - Self-adhesive papers (matte, gloss, kraft, etc.) - Plastic films: PP, PET, PVC - Special and synthetic materials -> Electrical and physical data: - Dimensions approx.: 1,400 × 855 × 1,000 mm - Weight approx.: 350 kg - Power supply: 220–240 V / 50–60 Hz - Power consumption: approx. 3 kW

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. Kodpfxey Af T Ij Ab Hjdr If interested, I look forward to your message.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm Ksdpfx Ajtndu Ueb Hedr DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Kdsdsra Rbgepfx Ab Hsr HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V Kodszq Apgepfx Ab Hjdr - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Kdjdpendcxgefx Ab Hor Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Kdjdpszfy Amsfx Ab Hjr Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)