Used Part Cleaning Machine for sale (72,380)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Blsdpfx Ajz Ngk Rektsp

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Bljdewb E S Iepfx Aktsp

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. Bsdpfoz Enr Tox Aktelp We will gladly answer any questions you may have about the system. An inspection is possible by appointment. New price of the system: approximately €85,000.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. Bsdpfx Aohgh I Ssktjlp - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2026, operating hours: 20 h, condition: new, functionality: fully functional, operating temperature: 60 °C, air pressure: 2.5 bar, conveyor belt width: 400 mm, heating capacity: 18 kW (24.47 HP), product height (max.): 200 mm, product length (max.): 800 mm, product width (max.): 400 mm, machine/vehicle number: 45664, Beltline / Conveyour Cleaning System 400 WRD is developed as a compact and efficient solution for parts washing directly in the production line. The Beltline Series is specifically designed for industrial parts washing and degreasing of components with a certain level of complexity or weight, or in applications where gentle handling is required. The energy-efficient design reduces both operating costs and manual handling, making the solution ideal for both small batch production and continuous operation. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Blodpfezy Eqxox Aktop You can find technical details in the PDF attached document.

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Bjdpoz Ek R Eofx Aktslp Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: used, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Suction Machine The B 60 W Bp Dose ride-on scrubber-suction machine is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against incorrect use. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. - Ride-on scrubber-suction machine (60 l) with drive system. - Ideal for 1000 - 2500 m². - Energy-saving eco!efficiency mode. Proven dual-disc technology ■ Brush heads can be quickly installed and replaced. Powerful drive system ■ Comfortable driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, suction mm 850 Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive drive motor Mains connection, charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, the pictures may differ, as the item is available in multiple units. Quantity: 1x Kärcher ride-on scrubber-suction machine B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and operating hours. Blsdpfex Hvvzjx Aktep You can find more cleaning machines - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Bodpfx Akexghngstjlp These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Bsdpfozwfulex Aktelp Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: used, KEN 2311-HOS Laboratory Dishwasher KEN 2311-HOS is a compact cleaning and disinfection unit. It is used for washing, disinfecting, and drying (optional) surgical instruments, rigid endoscopes, instruments for minimally invasive procedures, anesthesia equipment, abdominal and tubular instruments, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, and glassware. Several versions are available: single-door and double-door (pass-through) models. Pass-through machines are always preferred, as the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-contamination. ■ User-friendly control panel – ensures correct operation ■ Option for individual program selection. 4 programs as standard ■ Process indicator bar shows the progress of the program ■ Double temperature monitoring (EN/ISO 15883) ■ Connection option for 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Power connection 3 x 400 V, N, PE, 50 Hz Connected load/fuse rating 10 kW/16 A Water connection Cold, untreated water: 1, ¾" BSP, 5-30°C, 0-30°dH Bljdpfx Aeiuzkmjktjp Water connection Hot, softened water: 1, ¾" BSP, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per cycle 13-14 l Pump capacity 370 l/min Clearance depth 2 doors 560 mm Clearance depth without center panel 510 mm Clearance width without center panel 510 mm Noise level approx. 59-64 dBA (sound pressure) Ingress protection class IP 21 (not suitable for dishwashing) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed from a site that closed and has been stored since, and it was in working order at the time. It appears to be in very good condition. Unfortunately, we do not have the knowledge or the equipment to test the unit further, and therefore, this unit is sold as is, in the condition shown in the pictures. If you would like to test or inspect this unit before purchasing, please contact us at any time to arrange an appointment. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. Bedpfxowfflve Aktelp General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: excellent (used), functionality: fully functional, RIDGID SeeSnake C40 camera system with TruSense Versa monitor used, from business liquidation The SeeSnake Compact C40 offers digital recording of inspections with Wi-Fi for quick and efficient organization and completion. Thanks to the tilting function, you can view the monitor at any desired angle or detach it for convenient placement at the work site. TruSense technology features an HDR (High Dynamic Range) image sensor and two-way communication between the camera and Wi-Fi-enabled monitors in the SeeSnake CSx series. Bsdpfxjz Iba Ao Aktelp Technical data according to the manufacturer: Pipe capacity 38 mm to 152 mm Push cable length 40 m Push cable diameter 0.26" (6.7 mm) with 0.12" (3 mm) fiber optic core Push cable jacket polypropylene Push cable minimum bending radius: 63.5 mm Weight (without battery): 8.0 kg Dimensions length: 63.5 cm Width 35.6 cm Height 43.2 cm Camera head: 1" (25 mm) Operating temperature -10°C to 50 °C Storage temperature -10 °C to 70 °C Ingress protection without monitor IPx5 Lighting: High-intensity LED sensor 512 Hz We recommend an inspection. Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, details and technical data from the manufacturer. To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and welcome, but only by prior appointment. Subject to prior sale, changes, errors and omissions.

Condition: used, The Nilco BA33-33E cleaning machine is a compact, high-performance scrubber-dryer designed for the thorough cleaning of hard floors. Technical data: - Motor: 1.3 kW Bljdpfx Ajzry Amsktop - Weight: 37 kg - Working width: approx. 40 cm

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Bledpfex El A Ujx Aktop Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Feed rate: 9–23 m/min Glue tank capacity: 9 kg Blodpozuwdgefx Aktjp Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: Bsdpfx Akezklb Eetolp 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request!

Condition: reconditioned (used), Year of construction: 2001, Riehle cleaning machine. Year of manufacture: 2001 Bsdpjz Ia Ixjfx Aktolp Power: 17 kW Used and refurbished. Price on request.

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Bjdpfx Aj Aaz S Aektslp Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: used, Year of construction: 2010, operating hours: 965 h, functionality: fully functional, machine/vehicle number: 1036S00103, fuel type: gas, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper machine Chassis number: 1036S00103 Blsde Agxmvjpfx Aktjp Condition: Ready for use and fully functional Technical condition: good

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Bjdjxd Awdjpfx Aktslp

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Bljdpfx Aszfaaxektjp

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-flood cleaning system – parts cleaning system for the highest requirements or precision and fine cleaning. Basket useful dimensions, loading basket: L x W x H 600 x 400 x 300 mm Maximum loading weight: 150 kg; loading trolley in front of the system included. 3-tank design: Cleaning (600 liters) Rinse 1 (600 liters) Rinse 2 (600 liters) System electrically heated - Cleaning processes: Spraying, injection flooding, ultrasonic - Ultrasonic (rod transducer): 3,000 watts effective / 6,000 watts peak - 30 kHz - Basket remains stationary, oscillates, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) Bljdpfx Asg Itg Ejktep - Hot air and vacuum drying (vacuum pump, manufacturer Leybold, 300 m3/h) - Full filtration of all tanks (3), each with a Topline bag filter (manufacturer Eaton), filter fineness freely selectable - Automatic water replenishment per tank - Preparation for coalescing oil separator - Preparation for the installation of a closed-loop system for the treatment of rinse water Control: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Immediately available! Demonstration unit. 24-month warranty. Useful volume: Cleaning area D = 800 mm Internal height 530 mm Load weight 150 kg Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control Bedpfxsr Hm R To Aktslp - Lid locking mechanism - Removable filter screen Accessories: Swirl extraction Automatic level compensation Oil skimmer, WE version Pumping device / bottom flushing with hose and manual ball valve.

Condition: excellent (used), operating hours: 186 h, overall weight: 110 kg, warranty duration: 12 months, I sell used and new machines for dry ice cleaning. The offered unit is used and comes with a 1-year warranty. The machine has only 186 operating hours. The set includes one nozzle of your choice. Also included are a hose for dry ice blasting and an applicator. There is a hose for compressed air supply. Hose holders and transport straps are included. Blsdpsy Hf Hvjfx Aktop

Condition: good (used), functionality: fully functional, Saw bushings DK14 Saw bushings DK16 Saw bushing DK17 and other accessories Bjdpfx Ajxq R Rxoktjlp