Used Parts Saddle Stitching for sale (13,867)

Condition: as good as new (ex-display), Year of construction: 2026, Parts Cleaning Machine – Spray Cleaning Unit Type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel wash pump (by Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank capacity: 105 litres - Heating: electronically adjustable (room temperature to 90°C) - System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm - Empty weight: approx. 220 kg Washing time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and external cladding) made from stainless steel 1.4301 (AISI 304) Water circuit and loading basket made from stainless steel 1.4301 Complete system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Giodpfx Abod H Slcjhjp Steam extraction system including condensate recirculation Oil skimmer for bath maintenance The parts washing unit is as new (trial or laboratory unit) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Condition: new, Year of construction: 2026, Spray Cleaning Plant - Parts Washing Plant - NEW SYSTEM / pilot plant Basket useful dimensions: LxW 1.100 x 1.100 mm net height: 800 mm max. loading weight: 700 kg tank volume: 320 liters, spraying pressure: 4,3 bar, heatable up to 90°C plant completely made of stainless steel 1.4301 (AISI 304) and dip-pickled plant incl. loading trolley in front of the plant included special equipment: - steam vapor extraction incl. condensate return line - autom. water refilling and level control - filter unit (coarse filter) in the return to the washing tank - preparation for retrofitting of an oil separator - weekly timer - E-spray tube for optimized component cleaning - Inspection hatch in the tank area - Siemens Logo control with colored touch panel (4,3") Gedpfx Aoc Udkbebhjip On request, commissioning can be carried out by qualified personnel at an extra charge.

Condition: as good as new (ex-display), Year of construction: 2026, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Giedpehl Ifzofx Abhep Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: good (used), Optimizer Paul 11 11MKL KE11 14E MAXI 4.0 All parts available. Prices are set individually. Gedpfx Abeyi T Raehjip

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz Giedpfxjxf Uwxs Abhjp - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Year of construction: 2005, condition: good (used), All spare parts for Heidelberg Prosetter 52/74/102 633 Hz. or 750 Hz. mirror Motor (second-hand or refurbished), as well as all other electronic and mechanic parts. LVDS-Interface-Cards Godpfsctky Hex Abhoip

Condition: excellent (used), Nearly all Suprasetter Spareparts for A52/74/75/105 and Classic and Suprasetter Laser Moduls, second hand, tested Gsdpfx Ajflwxvjbhoip All offers are subject to prior sale

Condition: used, Year of construction: 1975, Accessories / Spare parts for an engine lathe Manufacturer: TADU, Origin Spain Gjdpfx Absctgb Tsheip Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mounting A 1-8", spindle bore 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin Germany Model: MAS 3 On the TADU F 650, an additional intermediate gear has been installed. This enables a speed range of 8 - 42 and 40 - 200 rpm. Drive motor power 5.5 kW Price: €4,650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1997, Transnorm curved belt conveyor replacement part TS1500 RA2399 Giodpowc E Aiefx Abhsp Technical data: Model: TS1500 Transnorm Item number: 6004-2RS 12 pieces inkluding: Bearing Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg No information

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Gedpfxowty H Do Abhoip Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Macchia Milling Machine for Turned Parts - 2 working fields - Two milling spindles - Copying operation Godpfx Ajxrpw Hebhoip - Pneumatic component clamping

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Giodpevxqh Dsfx Abhep Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Gododnfdlepfx Abhoip Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Gijdpow Rm Hwefx Abhop Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Gisdpfxjbhh Awo Abhop Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc.

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder Giedsiqu R Djpfx Abhsp -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

Condition: good (used), Blind stitch sewing machine for sewing of belt loops. Warranty & Delivery The Machine si delivered complete The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post- warranty. WORLDWIDE DELIVERY! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Gjdpfxjrq Eg De Abhjip

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts from MORI SEIKI VL250 Bj.2000 Gedjcbinnopfx Abhjip 1.turret(not complete) Ball screw with nut X and Z axis X and Z axis guides parts are from new machine Motor X-axis See photos.

Condition: used, Year of construction: 1990, Bosch CNC control CC200 spare parts Monitors, cards, controllers etc. Gijdpjvk D R Nsfx Abhsp

Year of construction: 2010, condition: new, Spare part for CNC BAZ Fabr.DMG MORITyp:DMF 220 LineaTeile sind Neu Ball screw for Y and Z axisGuide rails Packet for complete X axis with brake . Gjdjd S A Unopfx Abheip

Year of construction: 1994, condition: good (used), Spare parts for MONFORTS CNC lathes KNC 5 /1250 (Electronics of KNC 4 -KNC8 identical) 1.handwheels price. 1500,-€ 1.all axis motors price 2000,-€ 1.plan support price 1800,-€ 1.tailstock price 1800,-€ 1.ball screw with nut Z-axis 750,-€ 1.cover ball screw Z-axis 250,-€ Gijdpfod Nmnwjx Abhsp 1.chip conveyor for turning length 1250mm with coolant pump price 2 800,-€ 1.main headstock price 1800,-€

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe VDF Boehringer cm180. Following parts. Turret head price:1500,-€ Tailstock price:1000,-€ Main headstock price:3000,-€ ball screw X and Z axis price:1000,-€ axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€ Godpegqurbofx Abhjip

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. 1. X and Z axis motors. Gedpfowf Aftsx Abheip 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Year of construction: 1982, condition: good (used), Spare parts for CNC lathe INDEX GU 1500 year 1982 Gjdpfx Abed Etq Hsheip Following parts : Tool turret Tailstock Complete guide covers.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Gsdpfxjdtdahe Abhsip Only spare parts Please ask what you need.