Used Pet Bottles Road for sale (4,671)

Condition: used, Year of construction: 2009, machine/vehicle number: INC37, Used SMI TF350 Tray packaging machine for PET 2009Technical Specifications & Performance DataThe SMI TF350 is a tray packaging machine designed for the secondary packaging of PET bottles. Built in 2009, this industrial packaging machine forms bottle packs into trays for efficient handling, transport, and distribution within a used bottling line. It provides a practical solution for beverage production facilities requiring dependable end-of-line packaging equipment.Manufacturer: SMIModel: TF350Year of manufacture: 2009Production capacity: 45-50 packs/minContainer handling: PET bottlesAdvanced Automation & Control SystemsThis tray packer is intended for automated packaging operations, supporting the organized grouping of PET bottles into tray configurations. Machines of this type are integrated with synchronized product infeed and discharge systems to maintain consistent pack flow through the secondary packaging stage. The TF350 can support streamlined operation in industrial packaging environments where repeatable pack formation is required.Production Line Integration CapabilitiesThe SMI TF350 can be positioned downstream of filling, capping, labeling, and bottle conveying equipment in a PET bottling line. It is suited to beverage production layouts where filled bottles must be grouped and prepared for palletizing or further distribution. Its capacity of 45-50 packs/min enables integration with appropriately matched upstream and downstream equipment.As a second hand tray packaging machine, it can be considered for line upgrades, replacement projects, or the expansion of existing bottling equipment. Correct integration requires compatible bottle conveyors, pack discharge handling, tray supply arrangements, and coordination with downstream palletizing or warehouse logistics systems.Machine Condition & Maintenance HistoryThe machine is in very good condition and has been regularly maintained. Extensive annual overhauls have been carried out by the manufacturer, supporting continued operational reliability. The tray packer remains in production until September 30, 2026, demonstrating that it is part of an active packaging process prior to dismantling.Operational Performance & VersatilityDesigned specifically for PET bottle handling, this tray packaging machine supports the secondary packaging stage of beverage production. Tray packing helps create stable, manageable bottle groups for storage, transport, and subsequent pallet handling. The machine is suitable for producers seeking used bottling line equipment that supports organized end-of-line operations without changing the primary filling process.Its role in industrial packaging is to convert a continuous flow of bottles into defined tray-packed units, improving product handling between production and distribution stages. Final pack configuration and compatibility should be coordinated with the bottle format, tray design, conveyor layout, and required downstream logistics flow.Installation Requirements & Site PreparationInstallation should be planned around the existing bottle conveyor route and the required infeed and discharge elevations. The machine is scheduled f... Chedpfez Nxdcox Andod

Condition: used, Year of construction: 2007, machine/vehicle number: LC385, Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Chedpfx Aevgufvondjd Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, this machine efficiently applies labels to the bottles, providing clear and professional branding for the products. Case Erector: Manufacturer: SistAI Model: HM 2000 Year: 1995 To complete the packaging process, a case erector by SistAI is included in the line. The HM 2000 model, manufactured in 1995, is a reliable machine that swiftly erects cases for efficient packaging and transportation of the bottles. Additional Details: The line’s production speed with 5-liter containers is 1800 to 2000 pieces per hour. The rinsing machine utilizes microfiltered water for treatment. The capper of the filling monoblock is equipped with interchangeable heads and channels based on production requirements. Cap sizes for screw caps include aluminum caps measuring 35 x 18 and plastic caps measuring 48 x 17. Used Complete Line for PET and Glass 2007, this complete line is in excellent condition and ready immedately for sale

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Chsdpfx Ajz E Dfiendsd

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors Chedpfev U Ni Sex Andsd The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Csdpfx Anjzg In Tjdohd

Condition: used, Year of construction: 2014, *Technical details* Speed: 6000 Bottles/hour Products: Wine (Still) Containers: Glass, PET Formats: 0.187 L PET bottle Safety features: Yes Manuals: Yes Fill type: Gravity/light depression Neck type: 22 mm * Consisting of:* *- Conveyors Conpart *The line ensures seamless movement of bottles using conveyors with suction systems, stabilizing each bottle while maintaining a nominal capacity of 7200 bottles per hour. *Filling Monoblock Euro Star LDG24-24-4V, Year 2014* - Operates with a rinser / blower equipped with 24 clamps, enabling a secure grip on the bottle neck. The injection system prevents fluid flow when bottles are absent. - Fills wine using 24 stainless steel spouts, which manage slight vacuum and inert gas overpressure to maintain ideal filling conditions. As a result, the conical-bottomed tank ensures complete product discharge at the end of each cycle. *Labeling Machine Conpart Arco M25, Year 2024 Chedpfs Ahltwjx Andsd * - suitable for cylindrical PET Bordeaux bottles of 0,187 liters and advances them using a screw feeding system, it applies labels with minimal waste. - suitable for self-adhesive labels and smooths them with foam rollers controlled by an electronic system.

Condition: used, Year of construction: 2004, operating hours: 55,000 h, Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 V Frequency 50 Hz CAT – CTA – CONTROLLED AIR TEMPERATURE Brand: CIAT Year: 2009 Controls the air temperature inside the KRONES CLEAN chamber to maintain the same temperature and also for clean room over-presurization. FILL LEVEL INSPECTOR Brand: HEUFT Chsdsvgugtepfx Andod Krones Used Filling Monoblock for Still Water –  IMMEDIATELY AVAILABLE – AND READY FOR PACKING AND SHIPPING! We can assist your company both in disassembly and assembly, we have competent staff and able to use the correct technology to reinstall this krones equipment. We can carry out a complete project of reinstallation and start-up of production with replacement of every damaged part or to be changed. We need about 1500 square meters for the entire bottling line, with the current layout. The disassembly work requires at least 30 days to be carried out carefully and marking all the cables and mechanical parts. All the programs are downloaded to ensure that no information is lost.

Condition: used, Year of construction: 2002, machine/vehicle number: M354, Used PROCOMAC RM 36-42-6 filling monoblock, flat liquids 9000 BPHTechnical Specifications & Performance DataThe PROCOMAC FILLSTAR BLOCK is a filling monoblock designed for integrated rinsing, filling and capping of still products in PET bottles. Built in 2002, the PET HAL 36/42/6 configuration combines a PROCOMAC GRIPSTAR rinser, HAL SF filler and AROL PK capper in a compact rotary bottling unit for beverage production and industrial packaging applications.Manufacturer: PROCOMACModel: PET HAL 36/42/6Configuration: rinser, filler and capper monoblockMaximum production speed: 9,000 bph on 0.5L bottlesRinser: PROCOMAC GRIPSTAR with 36 grippers and 1 treatmentFiller: HAL SF with 42 filling valves for still liquidsCapper: AROL PK with 6 heads for PCO 1881 capsCurrent bottle formats: 0.5L, 1.5L and 2.0LBottle neck diameters: 66 mm, 89 mm and 95 mmList of overhaul / revision works - Overhaul of main gearbox - Overhaul of main motor bearings - Replacement of carousel drive belt - Overhaul of star wheel bearings - Overhaul of rinser grippers - Overhaul of rinser rotary manifold - Overhaul of filler pneumatic cylinders - Inspection of bottle transfer grippers - Overhaul of filling valves - Overhaul of valve lifting carriage - Overhaul of product rotary manifold - Overhaul of inlet modulating valve - Overhaul of sanitizing by-pass valves - Overhaul of capper pistons - Overhaul of capper heads - Overhaul of capper cones - Replacement of centrators - Overhaul of cap distributor - Inspection of pneumatic system - Inspection of electrical system - General functional checkAdvanced Automation & Control SystemsThe monoblock is equipped with a dedicated separate electrical panel and Siemens electrical components. A Siemens S7 PLC provides machine control, while the ESA 9-inch touchscreen operator panel supports day-to-day operation and adjustment. The electrical supply is specified at 380 V, 50 Hz, three phases plus neutral, with a 24 V auxiliary supply and 10 kW installed power.Siemens S7 PLC control systemESA 9-inch touchscreen operator interfaceDedicated separate electrical panel380 V, 50 Hz, three phases plus neutralInstalled power: 10 kWProduction Line Integration CapabilitiesDesigned as an integrated rinser-filler-capper block, this machine can serve as the central filling station in a used bottling line for PET bottle production. Neck-handling bottle transfer supports stable container movement through the rinsing, filling and capping stages. The quick format-change arrangement supports changeovers between the listed 0.5L, 1.5L and 2.0L bottle formats, making the monoblock suitable for production lines that require multiple package sizes.The pneumatic cap elevator and feeder manufactured by BERTOLASO supplies caps to the AROL capping section. Upstream and downstream conveyor systems can... Chedpo Adtt Hofx Andod

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Cedpfx Aey Icpqjndohd

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment Chodpfx Anj Ahlnnedjd 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Codpfxeyhcgbs Andohd

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector Csdpsvgvl Refx Andehd The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Chedpfju Nhiqsx Anded Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Chodpfsy Szcwsx Andjd

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Csdpfxjz E Dlvs Andjhd

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol CombiModel: SBO 16 Series 2 (Blower) + Sidel ALSIM (Filler) + Arol (Capper)Year: 2004Machine type: Synchronized Combiblock (Blow-Fill-Cap)Container material: PET BlowerCavities: 16 (molds not included)Blower Type: RotaryNeck finish set: AlaskaAir Recovery System: IncludedChiller: Not includedFiller Valves: 63 mechanical valvesFilling Type: Gravity fillingRotation Direction: Counter-clockwiseHygienic Enclosure: Pressurized cabin with air filtersCapper Heads: 12 headsCap Distribution System: Pick & Place SupportedCaps: Plastic pre-threaded caps (GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g - drawing available)Machine Condition: Fully overhauled at the end of 2024Advanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating, blowing, and filling cycles. The isobaric gravity filling system utilizes 63 mechanical valves to ensure low-turbulence filling, while the integrated pressurized cabin with air filters guarantees a clean environment for sensitive beverage production. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption. Quick adjustments for the Alaska neck finish and the specialized Arol pick-and-place cap distribution system reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe Combi system is designed for seamless integration into a complete beverage production line. By combining the Sidel SBO 16 blower, the ALSIM 63-valve gravity filler, and the Arol 12-head capper into a single monoblock, it eliminates intermediate air conveyors, reducing footprint and container scuffing. It pairs effectively with downstream packaging machinery and can operate inline with main conveyors, inspection systems, and labeling equipment. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters.Machine Condition & Maintenance HistoryThe complete Combi configuration was fully overhauled and refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projects. As a second h... Csdpfx Ajzccgdondohd

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line type: Blow, fill, cap, label, wrap, and palletizeConfiguration: Integrated continuous production with matched throughput across stationsAdvanced Automation & Control SystemsThe line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment.Centralized line control with coordinated drives for consistent throughputOperator-friendly interfaces for speed matching and format adjustmentsSafety guarding and interlocked access doorsEmergency stop circuitry across critical stationsQuick-change features to support format and product adjustmentsProduction Line Integration CapabilitiesThis second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats.Inline operation from blow molding to palletizingCompatible with PET cylindrical bottle formats; validated at 0.5L, 0.3L, 1.5L Hot-fill processing designed for juice productsEnd-of-line shrink wrapping and palletizing for stable distribution packsPotential to adapt speeds and formats within the design envelope of each componentMachine Condition & Maintenance HistoryThe line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment.Operational status: I... Chjdpozgtpvsfx Andjd

Condition: used, Year of construction: 2004, machine/vehicle number: LC277, Technical Specifications & Performance Data Year 2004 complete PET line, 6000 bottles/hour, isobaric filling. This used configuration from BAT, Kosme, M.A.S is set up for soft drinks and remains in storage. As a compact piece of soft drinks bottling machinery, it covers blow molding through end-of-line packaging. Bottle Formats: 1.5 L, 2 L, 1 L Container Types: PET Product Types: Soft Drinks Speed: 6000 bph Filling: Isobaric (Fill type: 5) Production Year: 2004 Current Status: In Storage Line Composition Blow Molding Machine: Kosme KSB 4 (2004) Premix: M.A.S Mixer (2004) Cedovguyaspfx Andohd Filling Monoblock: M.A.S 32/32/8 (1999) Labeling Machine: BAT EBI 07 (2006) Shrink Wrapper: BAT 12 packages/min (2005) Advanced Automation & Control Systems Integrated controls coordinate blow molding, premix, isobaric filling/capping, labeling, and shrink wrapping for stable throughput at 6000 bph. Automation supports precise fill control and consistent handling across the listed PET formats. Manuals are available to assist setup and troubleshooting. Electrical configuration suits standard industrial supply environments. Production Line Integration Capabilities The line is engineered for straightforward integration into existing utilities and conveyors. Format changes between 1.5 L, 2 L, 1 L are supported, enabling quick PET size switches while maintaining carbonated-beverage performance parameters. Interfaces between blow molder, premix, and the 32/32/8 monoblock streamline upstream and downstream connections. Machine Condition & Maintenance History The equipment is currently stored and prepared for redeployment. As a second-hand system, it shows a solid operating background; regular upkeep records support readiness with appropriate commissioning and maintenance. Operational Performance & Versatility Configured for soft drinks, the isobaric setup maintains product carbonation and fill accuracy across the specified PET formats. This used soft drinks bottling machinery provides consistent performance from container manufacture to final packaging within the stated speed class. Installation Requirements & Site Preparation Allocate sufficient footprint for blow molding, processing, filling, labeling, and packaging sections. Utility tie-ins (air, power, water, CO₂ where applicable) are arranged for rapid connection to minimize commissioning time. Safety Standards & Compliance Certification Machine guarding and safety interlocks support operator protection and hygienic handling in beverage applications. Protections are in place for routine operation and maintenance access.

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Chjdsy Uduuopfx Andod

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Codjyk E Srjpfx Andehd

Year of construction: 2026, condition: new, Automatic monoblock machine for filling and capping juices, wine, oil and other liquid products in glass or PET bottles. Filling and capping are combined in one compact unit with a production capacity of up to 800 bottles per hour, depending on bottle size and product characteristics. Chedpfx Anez Nd Hiodjd Bottles are fed by a starwheel, filled by five precision filling heads and transferred directly to the capping station. The capping system supports multiple cap types and provides adjustable torque. A No Bottle, No Fill function helps prevent product loss. Features and technical details • Capacity: up to 800 bottles per hour • Five-head filling system • Typical bottle volume range: 250 ml to 2 L • Suitable for different glass and PET bottle shapes and sizes • PLC control with touchscreen interface • Frequency-controlled drive with inverter for smooth speed adjustment • Adjustable cap torque • Suitable for hot or cold filling of fruit juices • Also suitable for wines, spirits, oils and other liquids The machine is manufactured from stainless steel and food-grade materials. Its enclosed stainless-steel frame helps protect the product from external contamination while supporting hygienic and safe operation.

Condition: used, machine/vehicle number: LC682, Used AVE 16-16-4 filling line, still & sparkling water - 2 PET blowerTechnical Specifications & Performance DataThis used bottling line is configured for beverage production in 0.33L, 0.5L and 1.5L bottle formats. The AVE filling line, manufactured in 2008, is designed for spring water and flavored water. Its stated capacity reaches 6,000 bph for 0.5L bottles and 2,500 bph for 1.5L bottles.Production capacity: 6,000 bph for 0.5L bottlesProduction capacity: 2,500 bph for 1.5L bottlesCompatible formats: 0.33L, 0.5L and 1.5LFilling monoblock configuration: 16/16/4 rinser, filler and capperCap specification: 28mm plastic screw cap, PCO 1881 neck finishSMF Combi 200 blow molding machine: 2003, 700 kg, 3 x 380 V, 28 kW, 50 HzSMF Combi 400 blow molding machine: 2016Advanced Automation & Control SystemsThe line combines bottle forming, conveying, filling, capping, labeling and shrink wrapping equipment for coordinated industrial packaging operations. The SMF Combi 200 blow molding machine operates on 3 x 380 V electrical supply at 50 Hz and has an installed power of 28 kW. Bottle lifters on the filler support stable container handling through the filling process.The included POSIMAT bottle handling system, manufactured in 1992, places 0.5L bottles onto the conveyor belt. Conveyor belts are included to provide material flow between the available equipment.Production Line Integration CapabilitiesThis second hand used bottling line supports PET bottle blowing and beverage bottling, while the AVE filler is also able to fill glass bottles. The process layout includes blow molding equipment, bottle orientation and conveying, a rinser-filler-capper triblock, labeling and shrink-film secondary packaging.Machine typeManufacturer / modelYearBlow Molding MachineSMF Combi 2002003Blow Molding MachineSMF Combi 4002016Various EquipmentPOSIMAT bottle placement system1992Filling MonoblockAVE 16/16/42008Labeling MachineAVE2008Shrink WrapperAVE2008Various EquipmentConveyor beltsThe AVE labeling machine handles paper, hot-applied and cut labels. T... Csdpfx Anoz E Dd Sjdohd

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Chodpoy Tpfijfx Anded Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a plastic preform production or PET packaging line: The resin is stored in hoppers. It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine Chsdpfx Anovgva Ueded The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, Offered for sale directly by the owner: 2019 FONG KEE TSE-90/150/150-2400 three-layer co-extrusion flat sheet & roll line with only 7,000 operating hours. Used exclusively in our own production, the line remains fully assembled indoors at our facility in Torbalı, İzmir, Türkiye, and is available for live running inspection by prior arrangement. Equipped with top-tier Western components (NORDSON EDI USA die & feedblock, 3x MAAG Switzerland melt pumps, Dynisco USA sensors, Siemens PLC/drives, and Schneider switchgear), this line delivers European-grade optical surface quality. KEY HIGHLIGHTS * Production-Proven Thickness up to 3.0 mm: Although factory paper specs listed 0.3–0.8 mm for thin furniture foil, in our own production we have successfully produced both PET (0.3–3.0 mm) and PMMA/ABS (0.6–3.0 mm) sheets up to 3.0 mm thick. * Multi-Polymer Capability: Production-confirmed across PET, PMMA, ABS, PS (HIPS/GPPS), PC, and PP in A/B/A or A/B/C structures. * Optical Mirror-Gloss & Matte Finishes: Produces both optical-grade mirror gloss and anti-glare matte finishes. An additional dedicated matte calender roll is included. * Dual Downstream (Sheets & Rolls): Features BOTH an automatic guillotine cutter + vacuum sheet stacker AND a double-station turret winder. 1. MAIN SPECIFICATIONS * Manufacturer & Model: FONG KEE (Taiwan) – TSE-90/150/150-2400 * Year / Hours: 2019 / 7,000 h * Configurations: 3-Layer (A/B/A or A/B/C) * Net Trimmed Sheet Width: 1,500 – 2,100 mm * Sheet Thickness (Production-Proven): PET 0.3–3.0 mm | PMMA/ABS 0.6–3.0 mm * Max. Output: Up to 1,000 kg/h (depending on resin & thickness) * Line Speed: 3 – 10 m/min 2. EXTRUSION & MELT DELIVERY * 3x Vented Single-Screw Extruders: - Extruder A: Ø90 mm, L/D 35:1 (Vented) - Extruder B: Ø150 mm, L/D 32:1 (Vented) - Extruder C: Ø150 mm, L/D 32:1 (Vented) * Filtration: 3x Hydraulic screen changers * Melt Pumps: 3x MAAG (Switzerland) gear melt pumps * Sensors: Dynisco (USA) melt pressure & temperature transducers * Feedblock: EDI Ultraflow I (USA) 3-layer feedblock * Extrusion Die: EDI Ultraflex HRC 100 Fastgap (USA), 2,300 mm width 3. CALENDERING & DOWNSTREAM * Polishing Stack: Horizontal 3-roll stack (Ø400/600/600 × 2,400 mm), hard-chrome mirror rolls with individual TCUs * Spare Roll: 1x Additional dedicated matte calender roll included * Masking: Dual-side protective film lamination * Haul-Off: Cooling conveyor, edge-trimming, and precision haul-off unit * Cutting & Stacking: Automatic guillotine cross-cutter + automatic vacuum stacker * Winding: 2-station turret winder with automatic tension control 4. AUTOMATION & COMMERCIAL TERMS Chjdpozzdnfjfx Andsd * Controls: Siemens SIMATIC PLC with HMI panels, Siemens SINAMICS G120 drives, Schneider switchgear, air-conditioned cabinets. * Ideal Applications: Furniture foils/laminates, white goods/refrigerator liners (HIPS/ABS), sanitaryware (PMMA/ABS), optical/lighting sheets (PMMA/PC/GPPS), thermoforming rolls (PET/PP). * Asking Price: USD 790,000 EXW Torbalı, İzmir, Türkiye (Open to reasonable offers for a prompt sale).