Used Pistol for sale (63)

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Max. usable height: 450 mm Max. load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Constructed entirely of stainless steel Thermal and sound insulation External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical connected load: 15 kW Including: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance Bsdpsxuzyfefx Addslr - Ultrasonic immersion transducer with two-sided sonication - Power: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: used, Year of construction: 2007, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2007 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:12 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/37,5 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Blodexnu S Iepfx Addsr Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder Further Equipment:Rinsing pistol

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container. Blodpfx Adelccvmsdsr

Condition: used, Year of construction: 2009, turning diameter 410 mm turning length 800 mm greates pass round over bed 700 mm control Heidenhain TurnPlus IT CNC Pilot spindle passage Ø 65 Teilhohlspannung mm spindle speed: 25- 5000 U/min spindle motor 25 kW max. torque on the spindle 280 Nm no. of tools in turret 1 12 VDI 40 driven stations 12 VDI 40 speed of driven tools 4000 U/min drive milling spindle 5,6/ 11,3 kW y-axis +/- 60 mm sup spindle 15 kW Spindlespeed subspindle 20- 6000 U/min rapid traverse 30/22,5/30 m/min tail stock Gegenspindle/Subspindle range L-W-H 4,7 x 2,7 x 2,0 mm weight of the machine ca. 6,5 t CNC lathe with driven tools, Y- axis and sub spindle Bjdpeurnggofx Addelr - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol - partly hollow spindle Ø 65 x 840 mm

Condition: new, power: 353 kW (479.95 HP), overall weight: 41,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, loading space volume: 10 m³, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO? EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES AT OUR LOCATION IN PORTA WESTFALICA, GERMANY. FOR ALL CUSTOMERS WHO FIND THEMSELVES IN URGENT NEED (SHORT-TERM CAPACITY INCREASE OR REPLACEMENT INVESTMENT). Your advantages: * Ready-to-use complete vehicles (concrete mixers/tippers) available immediately, directly from the manufacturer * Bodywork, assembly, commercial vehicle expertise * Best price/performance ratio * Financing options * Trade-in of your old vehicles Renault K 480 8X4 Euro6e EuromixMTP EM 10 L Concrete Mixer ENGINE DE 13 Displacement: 12.8 liters Max. power: 360 kW at 1404–1700 rpm Optidriver transmission AT 2612 (14.94 – 1) Wheelbase: 4,350 mm Rear axle ratio: 3.33 Tire size: 315/80 R22.5 Two electrically adjustable and heated exterior mirrors Tinted rear window Preparation for CB radio Rubber floor mats LUXURY DRIVER’S SEAT: Adjustable vertical suspension, seat cushion tilt, longitudinal and height adjustment, removable cover, adjustable headrest, quick lowering of seat with height memory, adjustable side support of seat back and seat cushion, adjustable lumbar support, seat cushion extension, seat heating, seat ventilation, two armrests on the driver's seat Viscope external sun visor Compressed air pistol in driver’s cab Concrete Mixer Equipment EUROMIXMTP - Superstructure EM 10 L – Lightweight * Model: EM 10 L * Nominal capacity 10 m³ ready-mixed concrete * Lightweight mixing drum design * Mixing drum in lightweight version made of HARDOX S450 * Mixing spirals in lightweight version made of HARDOX S500 * Gearbox brand ZF-P5300 * Hydraulic pump brand Bosch Rexroth * Hydraulic motor brand Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electric start-stop * Compressed air water system * Water connection at platform with hose line * Water fill line with C-coupling on one side * Mixing drum with service hatch * Climbing ladder with platform * Rubber collar at charging funnel * Swiveling single-arm discharge chute made of steel * Wear plates in charging funnel, discharge tray, and swivel chute * Drum locking device for safety during maintenance work * Polyurethane primer * Approximate weight 3,650 kg, variations +/- 5% * With emergency stop function according to EU safety regulations * Steel mudguards over rear axles * 2x extension chutes made of steel or plastic * Water system * Water tank 650L 500L 350L (compressed air) * Steel water tank * Shut-off valve mounted below water tank in fill line * Water connection with C-coupling * Operation & electrics * Mixer operation – mechanical at rear * Start-stop system (for EDC) * Geometric volume 17,361 L * Water tank volume 11,121 L * Tank inclination 11.3° * Length 7,075 mm * Width 2,300 mm * Height 2,748 mm Special features/options: * Extension chute plastic/steel/aluminum * Folding chute plastic (or steel) * Backflow flap swivel chute * Plastic box * Stainless steel toolbox * Non-pressurized additive tank * Pressurized additive tank * Shovel holder * Drum closure * Reversing camera Blodpfxjxq Nito Addsr * LED work lights * EuromixMTP intelligent drum control (electronic mixer control) * Step on underrun guard with hand grip * Water meter * Pressure gauge * Frame covering * Fire extinguisher * Holder for liquid concrete pipe (5 m long) * Adapter for concrete flow pipe

Condition: used, mileage: 94,000 km, power: 375 kW (509.86 HP), first registration: 10/2016, overall weight: 32,000 kg, fuel type: diesel, color: orange, axle configuration: > 3 axles, wheelbase: 4,600 mm, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, compressor, differential lock, electronic stability program (ESP), fog lights, navigation system, parking heater, soot filter, traction control, Double cab, central lubrication system, EBS, single owner, green emissions badge (category 4), reversing camera, electric windows, radio/CD, electrically adjustable exterior mirrors, speed limiter, adaptive cruise control, new general inspection / emissions test, diesel automatic, climate control, Euro 6, L package, green emissions badge 4, axles: 4, wheelbase: 460 cm, drivetrain configuration: 8x4 Tridem, last axle liftable and steerable, long-distance driver’s cab, large FMX cab with air conditioning, camera, differential lock, hydraulic system, tipper hydraulics, ABS, adaptive cruise control, EBS, ESP, compressor, navigation system, 2 remote controls, retarder/interder, auxiliary heating, aluminium fuel tank, brake booster, double fuel tank, electric windows, electrically adjustable exterior mirrors, speed limiter, fridge, air suspension, air horn, fog lights, particulate filter, radio/CD, rear view camera, sun visor, spoiler, toolbox, PTO (power take-off), centralized lubrication, central locking. MTS Dino 5 suction excavator Type 4A14 T 36,000 V, dual turbine Powerboom with rotary head, central lubrication, extra high-pressure pump unit with hoses and pistol, extra air valves at the rear of the truck for operating pneumatic tools such as a hammer, compressor hours: 3,790, fan hours: 3,512, MTS serviced, Volvo service book, garage vehicle, single owner, major overhaul for €31,000. Permissible gross weight: 32,000 kg. FOR US, CONDITION AND OUR GUT FEELING ARE DECISIVE – PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. Bedpfx Adevic A Usdjlr *TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE!* All information provided without guarantee. More offers can be found on our homepage. The description and stated data do not constitute a guarantee and are not binding. The binding agreement is the purchase contract concluded at the dealership when purchasing the vehicle. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2004, operating hours: 1,09,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door Bedpfxjxcp Slj Addolr - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 2004, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Bodpfx Aoxhbfneddslr Year of manuf. : 2004 Control : Mitsubishi TX-8i Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:18,5 kW Torque:230 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:11 kW Torque:210 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Ejector:Hydraulic with flush Movement in Z:520 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder, Rinsing pistol

Condition: used, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2026, Availability upon agreement – short-term rental. Current photos available on request! Fifth wheel height: 1,150 mm; Hydraulic system: 110 l/min, 225 bar; Connections at the front wall: 1'' male pressure, 1'' female return. BPW axles On Road Eco Air, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, closed side underrun protection painted in RAL 9005. Two LED work lights behind the 3rd axle and in front of the landing legs, one LED work light at the front interior top. 6 kg fire extinguisher, 3-meter ladder, wireless remote control for the floor, shovel and broom holder, 2 toolboxes in the rear overhang. 15-meter air hose with hydraulic drum and pistol, line length 4,400 mm. Self-supporting chassis, aluminum structure 3/2 mm, walkway on the front end with 2 ladders, door in the front wall on the left with ladder, floor type 10 aluminum. Aluminum movable wall with 3,800 g tarpaulin and track cleaner, rear doors each with two integrated 18 mm locking bars, reinforced door seals. Rear upper cross member unlockable by pin on the right side, pneumatic door unlocking, black 650 g roof roll tarp with 600 mm white side reinforcement. 12 pairs of lashing rings, wear plates on rear side walls 3x1.5 m, integrated lashing straps in the side wall with stainless steel ratchets, left side underrun tarpaulin RAL 7038. Bljdpsxp Tpbsfx Addjr

Condition: used, Year of construction: 2014, Pair of Sames brand Reciprocators complete with pistols with rotating cups (glasses not included) Ransburg brand (year 2014), Sames generators, pump and control panel Bjdpfjk H Scuox Addelr

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. Bjdpfx Adsumvu Ujdelr - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: new, Year of construction: 2025, functionality: fully functional, Double-sided opening cabin allows for sandblasting of large-size elements (e.g. engine block, motorcycle frame) without the need to rotate the object. Blodpfx Adov Aad Aedor Dust-free operation of the device is ensured by the use of peripheral seals, which allows the work to be performed in an environmentally friendly manner. The sandblasting hose is located at the bottom of the collecting container. The drain hole allows for a quick change of sandblasting material. The sandblaster is used for cleaning and treating various types of surfaces, e.g. removing rust, paints, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The abrasive can be, among others, quartz , silicon, glass beads, plastic sand, emery and other materials. TWO SEPARATE PRESSURE REGULATORS FOR EACH WORK STATION TWO CYCLONE EXTRACTIONS WITH DUST FILTERS ENSURING DUST-FREE WORKING Technical parameters Internal dimensions of the cabin 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x1880 mm Working pressure 4 - 8 bar Capacity 1,200 L Abrasive (abrasive) corundum, glass abrasive, and sand Weight 196 kg Standard equipment 8 ceramic nozzles 15 removable visor films 2 industrial pistols 2 pairs of work gloves 2 cyclones 2 pressure regulators 2 foot controls Manufacturer: Cormak

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Please contact Kristoff Van Havere for more information - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available Bodpfow Thkcsx Addjlr - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg - 220 liter: 620€ net - 430 liter: 788€ net

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table Blodpjxgnz Tjfx Addjr - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: used, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2026, Availability by arrangement – Short-term rental. Current photos upon request! Saddle height 1,150 mm. Hydraulic: 110 l/min, 225 bar, fittings on front wall: 1'' male pressure, 1'' female return. BPW On Road Eco Air axles, 1st axle lift, EBS 2S/2M KNORR, JOST steel landing legs, enclosed side underrun protection, painted RAL 9005, 2 LED work lights behind the 3rd axle and in front of the landing legs, 1x LED work light in the interior at the front top, 6 kg fire extinguisher, 3-meter ladder, radio remote control for the floor, shovel and broom holder, 2 toolboxes in the rear overhang, 15-meter air hose with hydraulic reel and pistol grip, hoses 4,400 mm, self-supporting chassis, aluminum body 3/2 mm, walkway on the front side with 2 ladders, door in the front wall left with ladder, floor type 10 aluminum, aluminum mobile wall with 3,800 g tarpaulin and track scraper, rear doors each with two integrated 18 mm locking bars, reinforced door seals, rear upper cross member unlockable with pin on the right side, pneumatic door unlocking, black roof roll tarp 650 g with 600 mm white side reinforcement, 12 pairs of lashing rings, wear plates on rear side walls 3x1.5 m, lashing straps integrated into sidewall with stainless steel ratchets, side protection tarp RAL7038 left. Bedpfx Ajxp Tphjddjlr

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm Bljdpeiryd Ujfx Adder plus two new Gamma pistols.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe available directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D PPU 290 Touch Panel control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • Renishaw probe arm for manual tool measurement • Ball screw drive for improved accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors equipped with integrated encoders for maximum accuracy • 45° slant-bed design for increased working capacity • Hydraulic 3-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and live tooling • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement capability • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency-stop impact switch greatly simplifies program setup • Belt-type chip conveyor • Work light for complete illumination of the work area • Coolant system with cleaning pistol Linear guides • Maximum static and dynamic rigidity • High positioning accuracy Bledpfx Adew Ebmisdor • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 positions powered by an integrated motor, rated for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High rigidity and durability • Facilitates chip removal SAFETY Integrated Overall package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Trace recording SIEMENS OSS Plus additional package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Dimensions and Weights Length approx. 4,570 mm Width/Depth approx. 1,845 mm Height approx. 1,955 mm Weight approx. 4,200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis Angular accuracy: 51" Repeatability: 20" Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed range: 30 – 4,000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ±0.002 mm Positioning accuracy: ±0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Continuous duty motor output S1: 11 kW Motor output S6-30% duty cycle: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30% duty cycle: 140 Nm Feed Force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN5480 Number of tool stations: 12 Drive motor output: 4.82 kW Max. permissible speed at tool coupling: 6,000 rpm Max. tool torque: 20 Nm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine for inserting vinyl glue and reins with gun - vibrating bowl for feeding the reins Bledoxd Atlepfx Addjr - glue tank 9 kg - water tank 9 liters - cleaning disposition - pneumatic pistol - for reins 8 mm, length 25 to 50 mm

Condition: used, 18EPE12Q, Cleco, pistol screwdriver with transducer Bodpfot Ig Eaox Addelr Model: 18EPE12Q Condition: Used

Condition: used, _____ Description: Year of manuf. : 2013 Control : Fanuc 30iM Speed : 15000 rpm Movement X/Y/Z : 500/560/500 mm Tool holder : BT40 Spindle: Speed:15.000 rpm Power:15 kW Torque:119 Nm Taper:BT40 NC-Roundtable: B-Axis:0,001° Palletsize:300 x 300 mm Blodpfx Adswwy Naodsr Tableloading (max.):250 kg Workpiecesize (max.):ø530 x 760 mm In general: Toolmagazine:71 stations Rapidtravers in X/Y/Z:60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 70 bar Workpiecemeasurement:Touchprobe, Renishaw OMP60 Toolbreakagecontrol:Mechanical Automation:Palletchanger, 2 stations Further Accessory:Trafo, rinsing pistol

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Blsdpfxoflq Spj Addsr Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm Bodpfoil Agnsx Addolr 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 8520-7-10558-FA, measuring range X-axis: 2,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 2,500 mm, Equipment: documentation/manual, Purchased brand new in 2023 for a project but no longer required. Only used for a number of hours - approx 50hrs. Tripod Table / Machine mounting ring Carry case Includes Dell Mobile Precision Workstation 7780 (Laptop of value £4,486.00) with PC DMIS 7-Axis Arm with 2.5 m Measurement Volume, Includes: • Absolute Encoders and SMART Sensors • Zero-G Counterbalance with SmartLock and HomeDock • Wrist Display • Haptic Feedback • Bluetooth wireless interface for wireless accessories • Spin Knob and Spin Grip • Base Plate with Mounting Ring • TESA TKJ Ball Probes: 3 mm Ruby / 6 mm Ruby / 15 mm Steel • Certified Length Standard • RDS Maintenance and Interface Software • Travel Case and Accessory Case • Power supply • Hexagon Dust Cover • ISO 10360-12 Certificate Removable Pistol Grip for Probing in Standard Mode (with Pistol Grip) or in Compact Mode (without Pistol Grip) Includes: Blsdpfxjwhwdpe Addsr • Nose Cone • 3 sizes of Pistol Grip Handles: Small / Medium / Large • The medium size grip is mounted on to Pistol Grip main body • Certified Sphere for Probing Wireless Pack (CP-W) shipped fully configured and mounted on t he arm. The CP-W provides: • Single Ethernet connection for all touch probes, tube probes and scanners (HP-L-8.9, HP-C-V3D, AS1, RS6, RS5 and RSSQUARED) • Wireless connections for all touch probes, tube probes, AS1, RS6, RS5 and RS-SQUARED. (HP-L-8.9 and HP-C-V3D do not support wireless connections). • One Ethernet to USB adapter, for users who prefer a USB connection to Ethernet • Battery operation available (with hot-swappable batteries) Includes: • Wireless Pack CP-W • ODU-Ethernet Cable - 3m • Ethernet Gigabit adapter • Two rechargeable batteries Note: CP-W is certified to IP54 when mounted on the arm MST138 Portable Precision Carbon Tripod Precision carbon tripod for Absolute Tracker AT930/960, ATS600 or Absolute Arm. The MST138 has the following features: - Foldable tripod with carbon legs - Height scale on center leg - 3x integrated fixed positions for AT Controller/ATS Controller or external batteries MPB25/MPB100 - 3.5x8’’ thread to mount Absolute Tracker AT930/AT960, ATS600 or Absolute Arm - Adjustable height: 79 cm – 131 cm (31.1’’ – 51.6’’) - Weight: 13.5 kg (29.8 lbs) Compatibility: AT930, AT960, ATS600, AT403 TM6100A with MSI140 adaptor

Condition: used, Fire extinguisher, powder extinguisher Bsdpfsb A I Urex Addolr -Fire classes: A, B and C -Chassis: with solid rubber tires and swivel castor -Nitrogen bottle -10 m high-pressure hose: with lockable extinguishing pistol -Dimensions: 600/450/H1050 mm -Weight: 120 kg

Condition: used, machine/vehicle number: 77-01-22, Stud welding device, compact stud welding system, stud welding device, stud welding -max current: A Blsdpfx Adjb H Rk Tsdor -without pistol -Housing: robust -for threaded bolts: max. 10 mm -Number: 3x stud welding devices available -Price per piece -Dimensions: 420/220/H290 mm -Weight: 14kg