Used Piston Press for sale (27,602)

Condition: excellent (used), Year of construction: 2024, Baling Press, Bramidan X30 LP, 30 t pressing force – used, as new: Price ex site: only €12,750 (net) Manufacturer: Bramidan Model: X30 LP Year of manufacture: 2024 Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1090 x 530 Cycle time (average, s): 25 Dimensions WxDxH (mm): 1760 x 1255 x 1995 Weight (kg): 1450 Stroke (mm): 950 Number of bindings: 4 Binding type: Tape / Steel wire Automatic bale ejector Bale weight: Giodex Tzqkspfx Ah Hel - Cardboard (kg): 225-325 - Plastic film (kg): 275-375 Pressing force: 30 t Material types: - Cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, rigid plastics, textiles, polystyrene. Noise level: 59-60 dB Low-profile baler with high pressing force Suitable for a wide variety of recyclable materials Low overall height High pressing force Very low noise level Up to 80% savings on volume, space, transport, and CO2 Powder-coated finish ensures durable, clean surfaces in various colours Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Previous new price: €17,490 (net) Condition: very good Availability: immediately Location: 15745 Wildau (near Berlin)

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Giedswhvq Ispfx Ah Hel Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades Gisdpfxorbk Tfo Ah Hsl • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: good (used), machine/vehicle number: Blinie, BSTA 30 Number of strokes 600 spm Gedpfodguhcox Ah Hjil Feed BBV 120/60 Pressing force 30 T Maximum strip width 190 mm with CE certificate and warranty Machine rebuild Good condition More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: excellent (used), Catalogue number 7740 TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations) Gedox S Ebdjpfx Ah Hjil

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Gsdpfx Aovfy Sxeh Hsil Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Gedjvuuhyspfx Ah Hoil Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Year of construction: 1988, Rated deformation force kN 630 Stroke mm 10 - 105 Shut height mm 335 Throat mm 315 Passage mm 355 Gedox Sqtljpfx Ah Heil Slide adjustment mm 70 Number of slide strokes /min 65/130 Slide area mm 450 x 280 Table area mm 800 x 630 Pressure MPa 0,5 Main motor output kW 5,0/7,5 Total input kVA 10,4 Machine dimensions mm 1425 x 1790 x 2550 Machine weight kg 5850

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available Gijdpfsrbiv Aex Ah Hel

Condition: good (used), High-Speed punching press - BSTA 18 /600 Stroke power 180 KN (18 tons) Overhauled by Silicon in good working condition Adjustable speed 60 - 600 (strokes) per minute up to 10 strokes in one second Gedpfe Udtyjx Ah Heil Equipped with synchronized double rolls BBV120 feed for strips widths from max. 120 mm Feed pitch up to max. 60 mm adjustable, highly accurate With stroke counter with programmable auto stop and speed counter Machine complete weight approx 1.5 tons Maximum strip width 120 mm Maximum strip thickness 2.2 mm Maximum feed pitch 60 mm Indexing per minute, infinitely variable 60 - 600 strokes Automatic in feed Operators instruction manual More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 1990, In good technical condition, fully functional. Year of manufacture: 1990. Nominal press force: 63 tons. Table working surface dimensions: 800 x 630 mm. Machine weight approx. 6 tons. Godpfx Ahox Sqtfo Hsil

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Gedov Rtg Tjpfx Ah Heil Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Gijdpfx Ahovuubgs Hol Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1991, Press Brake Godjx Tzl Iepfx Ah Heil Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Max. pressing force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width / throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Availability: immediately

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system Godpfx Asx Twc Aeh Hsil - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm Giedox R Dvqjpfx Ah Hel - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Application Types Pressing / Laminating Gjdpfox Tkazsx Ah Hoil

Condition: used, AGOSTINO COLOMBO G250 Giodpfov Sya Ajx Ah Hjl

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm Gisdpfx Ahsvut Ifs Hsl pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2018, _____ Description: Year of manuf. : 2018 Control : Technical data Bending length:4080 mm Pressing force:170 t Column passage:4404 mm Gjdpfxexgpwps Ah Hoil Tools:included in the scope of delivery Equipment Axis stop:4-axis Angle measuring system:ACB Laser Manual Support bracket:1x

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Gedpfx Ahjx Twb So Hoil

Condition: used, Year of construction: 2010, pressure 600 t Giedpfxovut Dye Ah Hsl distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system Giodjw U Ekpepfx Ah Hel

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm Gjdpevuukujfx Ah Hsil side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Gisdpsvuucqofx Ah Hjl Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading