Used Piston Press for sale (13,721)

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. Psdpox Uwtdofx Alhogn 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2024, machine/vehicle number: MA0172, new KAESER EPC 630-250 St piston compressor - 10 bar with horizontal lacquered 250 litre container Year: 2024 Pgodpfxsity Dqs Alhen 2 cylinders max pressure: 10 bar Rated power: 3.0 kW Volume flow at 6 bar : 410 l/min Volume flow at 8 bar : 375 l/min Sound level: 75 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 650 x 700 x 1810 mm Weight: 150 kg Visit our shop. We always have a wide range of new and used compressors on hand!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Pgedpferxu Erox Alhen Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2022, condition: as good as new (ex-display), REKO 510-B Auxiliary compressor (reciprocating compressor) Pgodpfjpyhpdex Alhen incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Pgjdpevr Eicjfx Alhen Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Pgsdpfewhxluex Alhjn Sound level: 79 dB(A) Volume compressed air tank: 270 liters Dimensions L x W x H: 970 x 795 x 1880 mm Weight: 264 kg We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Pgodpfsd H Dr Sox Alhen Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: ready for operation (used), Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible. Pgsdpfx Ajvn S S Aolhon

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm Pgjdeyi H Ekjpfx Alhon • Serial number: S88668802 • Design: oil-free • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: new, Equipment: compressed air system, Refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter Pgsdpfswwi Acsx Alhon For use in environments where compressed air quality as well as durability and efficiency are essential V-belt drive Long service life thanks to two-stage high-performance compressor units with low speed Specially machined cast iron cylinders for minimal oil consumption and long service life Optimal cooling via large fan wheel Motor with overload protection Easy condensate drainage through standard 1/2" ball valve Supplied as standard with Condor pressure switch and pressure gauge Supplied as standard on safety base pallet with vibration dampers Tank manufactured according to German AD 2000 regulations Intake capacity: 650 l/min Filling capacity: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor output: 4 kW / 400 V

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, Pedpovl Euxefx Alhsgn engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, Pgsdpowgcb Djfx Alhjn excluding transport, subject to prior sale.

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and Pgsdpevl Ev Aefx Alhjn excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Pjdpfxswpupxo Alhogn Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle High-Pressure Compressor Type: D44 Year of manufacture: 2000 Pgjdof Hly Sjpfx Alhen Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM The compressor can be inspected at any time.

Condition: used, Year of construction: 2016, operating hours: 8,020 h, functionality: fully functional, overall weight: 151 kg, power: 1.5 kW (2.04 HP), pressure (max.): 9.75 bar, Atlas Copco SF1FF Full Feature Compressor – 2016 – With tank Condition: Used – very good condition Atlas Copco SF1FF Full Feature (FF) compressor, quiet and compact, with integrated dryer and tank, ready for use. Pedpfxjyq Tbzj Alhjgn Technical specifications -Model: SF1FF – Full Feature -Year: 2016 -Max pressure: 9.75 bar -Air delivery: 1.9 l/s (0.11 m³/min – 4 cfm) -Motor power: 1.5 kW (2 HP) -Power supply: 230 V – 50 Hz – single phase -Weight: 151 kg -Integrated dryer: yes (dry air, ready for use) Key features -Reliable and quiet compressor -Very good overall condition -Recent maintenance -Ideal for workshop, maintenance, small production

Condition: new, Manufacturer: Trane Type: CRHR400 G2HBO Type: Compressor Technical Specifications: Flow rate: 145.3 m³/h Discharge pressure: 28 bar Speed: 1450 rpm Pgedpfsu Eb Aisx Alhen Voltage: 380/415 V 3PH 100/92 A 50 Hz Replacement price: €11,043 Condition: New

Condition: ready for operation (used), Atlas Copco piston compressor 8.8 bar 30 kW / 40 hp. Dimensions: 190x150x130 cm 19628 hours Please note: The information on this page has been obtained and compiled to the best of our ability, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we advise you to verify all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT cannot be reclaimed by businesses) Pgsdpfx Aovdcutelhen

Condition: good (used), Impress HM 4 Hot Stamping Press Podpfx Aezday Rslhsgn This machine is in very good condition and ready to use. This machine is from the popular Impress hot stamping machine manufacturer, manufactured in the UK. Description The Impress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a slide-out function, adjustable embossing depth, a heating plate with a thermostat, and an automatic foil feed. Specifications: Heating temperature control via thermostat Heating plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 50 kg Plate size: 150 x 150 mm.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: Pgjdpfjzdau Uex Alhjn MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Podpfx Alszdat Rehogn

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Pgedpfxozdatqe Alhjn

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Pgsdpfx Aotx T Tyolhon

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Pgodpfxsx Eg Ups Alhsn Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2003, pressure 400 t Pgedpjvzxpusfx Alhsn distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition