Used Plasma Spray for sale (2,465)

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. Dkodox Ihvvspfx Afpoh In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. Dedpfxjx Ihvio Afpekh - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 1996, Plasmacutter, Plasma Cutting Machine Manufacturer: SAF Dedpfew Dpi Nex Afpokh Type: Plasmatome 3 Control: Digisaf 2.5 Manufacturer plasma-source: SAF Type plasma-source: Nertajet HP120 Cutting-dimensions: 6000x2000mm Cutting-thickness: 35mm Incl. filter/extraction! Incl. documentation and peripherals Machine dismantled for transport - Year: 1996 - Documentation available: Yes - CE certificate present: No - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2000 - Max. material thickness [mm]: 35 - Options: Extraction Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, PLASMA CUTTING - HYPERTHERM 130XD Dkjdpev Ex A Asfx Afpoh

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. Dkedjyhd D Ispfx Afpjh - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Machine No. 70-2513 Year of manufacture: 1990 Output: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity up to 32 mm sheet thickness Stepless adjustment range Torch hose package length: 22 metres Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 63 Amp. plug Dodpfx Afeyah Sajpjkh - Torch hose package with straight torch, without switch, for robotic operation - Separate pushbutton switch to start the plasma cutter Required space (L x W x H): 850 x 700 x 1100 mm Weight: 225 kg Good condition

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Dsdpfx Afsyah R Njpokh Very good condition

Condition: like new (used), Year of construction: 2018, functionality: fully functional, For sale is a Zinser CNC plasma cutting machine with Hypertherm HBR 130 xd power source and accessories. Dedsxpwzuepfx Afpokh The system is equipped with an angular head and consists of both a flatbed and a tube processing unit.

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Dsdpfx Aewf U Rusfpekh Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Dkodpfxsw I A N Ae Afpoh

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, table length: 6,000 mm, table width: 2,500 mm, Equipment comes as a set: Plasma cutter Satronic E3500 + ventilation unit + gas module ventilation unit: Kemper System 8000 (5,5kW; 7000m3/h) Dkedsycp R Nspfx Afpjh gas control module: Thermal Dynamics Ultra-Cut 200 (GCM-2010) The machine was in working order when last used about a year ago. It has not been used or tested since. Buyer is responsible for dismantling, loading, and transportation of the machine.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit incl. KWE 360, PGV 3. Cutting table with complete extraction system. The plant is fully operational and in excellent condition. Demonstration possible. Original price €190,000.00. The plant is immediately available. The price is valid for purchase decisions made by the end of November!! Dismantling possible in January 2026. Dkodpfjwmq Tzsx Afpjh

Condition: used, 2K Adhesive System, 2-Component Dispensing System with Hand Applicator for 2-Component Adhesives Mayer & Mayer Type MMR R2020R VLOOP DG 2:1 PUB Serial No. 2021-001 Year of manufacture: 2021 VLOOP = Very LOw OutPut versions, approx. 30 – 210 ml/min Mix ratio: 2:1 (adjustable) Container size: Standard, 20 liter bucket Air pressure: 6 – 8 bar Air consumption: 80 –100 m³/h Power supply: 230V, 50 Hz - No open containers - Fully pneumatic drive - Continuous, precise mixing - Chain-driven gerotor metering pumps - Easy ratio adjustment - Compact and easy to handle - Simple operation and maintenance - All components/fittings made of stainless steel - Stainless steel transfer pumps - Stainless steel gear pumps - Double piston rams - Mobile aluminum profile unit on wheels - 8 meter hose package consisting of a 5 meter supply hose and 3 meter flexible whip hose lines - Includes GSMFG G200X-GUN (hand applicator) - Boom arm device for easier hose guidance - Operating manual - Approx. 130 mixer tips (F-System) included All installed parts are sourced from reputable, high-quality suppliers such as Ingersoll Rand, Parker, VSE, Zenith, and others. Dimensions (W x H x D): 800 x 2000 x 2700 mm Weight: 332 kg Dedjx Urb Aopfx Afpekh Currently used silicone adhesive: Component (A) LOCTITE SI 5610 A (container empty) Component (B) LOCTITE SI 5610 B (container half full) The MM large dispensing systems are specifically optimized for the use of structural MMA adhesives from EBS, LLC, featuring a robust, durable, and maintenance-friendly design to ensure long-term, trouble-free, and consistent adhesive application. The system can be modified for dispensing a wide range of two-component adhesives such as polyurethanes, epoxies, methyl methacrylates, and others. BASIC FUNCTIONAL OVERVIEW: A pneumatically driven motor, powered solely by compressed air, drives the adhesive and activator gear pumps (= metering pumps) via a chain drive system. These metering pumps are continuously supplied by adhesive and activator transfer pumps, which are also air driven. This way, components A and B are kept separate but are pumped in the pre-set ratio through separate hose sets to a dispensing gun, where they are mixed at the gun outlet by a static mixer nozzle. As a result, the entire dispensing system requires little to no cleaning. The flow rate, which controls the dispensing speed, can be adjusted via the speed of the pneumatic drive motor.

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB Dsdpoxw A Icjfx Afpekh :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen Dksdpfx Aexv Nk Usfpjh :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, working range: 8,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 30 mm, input voltage: 400 V, total width: 4,500 mm, total height: 3,605 mm, total length: 12,000 mm, track width: 4,000 mm, table height: 700 mm, table length: 9,000 mm, working width: 2,500 mm, table width: 3,000 mm, cutting current: 600 A, working length: 8,000 mm, space requirement length: 12,000 mm, type of cooling: water, height adjustment type: electric, ambient temperature (max.): 45 °C, Plasma-oxyfuel combination machine with water table 600A cutting capacity Water table suitable for sheets up to 2500x8000mm First commissioned in 2009 Maximum cutting capacity: 150mm steel plate Dedpfox Ew Ebjx Afpekh Original price: €224,000 Self-dismantling required

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 3,500 kg, We offer this CNC plasma cutter YK 1560 in very good condition, year of manufacture 2012. type: CNC plasma cutter model: YK 1560 serial number: 201202 weight: 3,500 kg power: 2.5 kW date of manufacture: 15-01-2012 Dkodpsx Uwlgofx Afpoh If you have any questions or require additional information, please send us a message or call us.

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Dsdpeyaqpbofx Afpskh

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. Application Types Dodpfxox S Skfo Afpskh Cutting

Condition: like new (used), Year of construction: 2025, operating hours: 26 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included Dkodjygczpopfx Afpsh - 4-year manufacturer’s warranty - New price: €135,000 (net) Freight and installation available as separate offer.

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card Dedpfjx Sqy Ssx Afpjkh - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN - Condensate treatment system type: Aquamat CF 3

Year of construction: 2025, condition: new, WORKING AREA 2500 X 2000MM (POSSIBILITY OF EXTENDING THE WORKING AREA ON THE Y AXIS) Dodepwhgwopfx Afpekh Z AXIS 250MM ESA CONTROL WITH CONTROL CABINET AUTOMATIC HEIGHT SENSOR THC SERVO AC ESA DRIVES SECTIONAL EXTRACTION TABLE HYPERTHERM MAXPRO200A PLASMA SOURCE GAS BURNER

Condition: new, functionality: fully functional, BINKS MX 30/70 – Air-operated airless / air-assisted industrial pump The BINKS MX 30/70 is an advanced air-operated industrial pump from Binks' MX series, developed for demanding surface treatment applications. The pump utilizes patented magnetic valve technology, which ensures rapid switching and very low pulsation for uniform material flow and high-quality finish. The ceramic-coated piston rod offers exceptional wear resistance and up to 3× longer service life when handling abrasive materials. Features: Pressure ratio: 30/70 Very low pulsation Air-operated, robust construction Long service life and minimal downtime Typical applications: Corrosion protection, steel structures, pipes and tanks, maritime, vehicle and chassis manufacturing. Djdpfxsyfucij Afpskh Suitable for both solvent- and water-based coatings, epoxies, polyurethanes, and zinc-rich primers.

Condition: new, functionality: fully functional, BANDO Buffalo 45:1 Paint Pump – Stainless Steel Version The BANDO Buffalo 45:1 is a powerful and reliable paint pump made of stainless steel, designed for professional industrial applications. The pump is suitable for handling lacquers, paints, coatings, and other high-viscosity materials where stable pressure and uniform flow are crucial. Its stainless-steel construction ensures high resistance against wear and corrosion, providing long service life and low maintenance costs – even in demanding production environments. Features and Benefits: 45:1 pressure ratio – powerful and efficient material supply Stainless steel design – ideal for lacquers and aggressive materials Stable and consistent operation Suitable for professional spraying and coating systems The BANDO Buffalo 45:1 is the obvious choice for companies demanding high quality, durability, and dependable performance. Dkjdpfx Aoyft U Rofpoh

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. Dksdpfx Afeydqk Hepoh German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.