Used Pneumatic Feeder for sale (9,094)

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Bwedpswqx H Refx Agkei Very good condition

Condition: excellent (used), Year of construction: 2015, Manufacturer: Honger Type: GL-300 Year of manufacture: 2015 Sheet thickness: 0.3 – 3.0 mm Sheet width: 60 – 300 mm Coil inner diameter: 508 mm Coil outer diameter: max. 1200 mm Max. coil weight: 1 ton Voltage: 220 V Bsdpfoyapvmsx Agkewi Power: 1.5 kW

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Bsdpfxeh Dikws Agkjwi • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Auger diameter: 35 cm Bwjdoxz R Rajpfx Agkoi Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Infeed height: 175 cm

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers Bodsma Dkfopfx Agkewi two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Conveyor transporter for feeding products to a height of 400 cm. Currently, the conveyor was used to feed preforms to a PET bottle blow molding machine, but it can also be used for transporting other products to significant heights. Manufacturer: M. TANNER AG Model: VZT-2000 Conveyor height: 4300 mm Belt width: 500 mm Bjdpfx Aovzz T Asgkjwi Weight: 850 kg All components included with the machine are shown in the photos. Machine condition: used, requires technical inspection.

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic clamping ensuring precise fixture of worked material, increasing cut accuracy and quality. This clamping is easy to assemble and operate. Technical data Clamping length 3200 mm Material height 100 mm Actuators 4 Working pressure 2 bar Bwsdpovxtcqofx Agkji Manufacturer: Cormak

Condition: used, Description For sale is a set of SCHUNK pneumatic 2-jaw power clamping blocks (centrically clamping) including manual/control valve (as shown) and an extensive set of top/clamping jaws (various designs, incl. prism/V-jaws). Ideal for fixture construction, series production, and flexible setups. Bjdpfx Ageyp Iflekowi 2 units available Price quoted: net/unit Collection in 57439 Attendorn. Shipping possible.

Condition: new, Year of construction: 2026, The dual wire feeder has been designed to increase the efficiency and quality of welding processes in the most demanding industrial environments. Thanks to its innovative design that allows the use of two different types of welding wires, this feeder is the ideal solution for CORMAK laser welding machines, offering users a number of benefits. Dual wire feeder for CORMAK laser welding machines The dual wire feeder is the choice that allows for significant improvement in work standards, while offering the flexibility, efficiency and reliability necessary in modern production processes. This solution meets the expectations of even the most demanding users looking for ways to optimize their IMPROVED PRODUCTIVITY - The dual wire feeder reduces machine downtime associated with spool changes, contributing to faster and more efficient production cycles. VERSATILITY - The dual wire feeder allows for quick adaptation to changing project requirements. Bodpfx Ajwl Ewxogkswi PROCESS OPTIMIZATION - Users can easily switch between wires with different diameters or properties to tailor the welding process to specific tasks, ensuring high weld quality and work efficiency. IMPROVED WELD QUALITY - By allowing for dual wire to weld material, the feeder provides better alignment at larger gaps, resulting in longer lasting and cleaner welds. REDUCE OPERATING COSTS - Long-term benefits such as reduced downtime and improved work efficiency allow for significant savings.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle motor power: 2,200 W, turning length: 135 mm, spindle speed (max.): 8,000 rpm, turning diameter: 12 mm, overall weight: 1,400 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 100 rpm, type of input current: AC, bar passage: 12 mm, feed length Z-axis: 120 mm, total width: 770 mm, total length: 1,500 mm, bar diameter (max.): 12 mm, working length: 135 mm, rapid traverse X-axis: 21 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 15 m/min, input voltage: 400 V, power: 2.2 kW (2.99 HP), travel distance Z-axis: 120 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Cincom Lincom B2 sliding head lathe, year of manufacture 1999. Condition: Used, very good Description TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machining length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001 degrees Bjdpfx Agjynwgpskowi SUB-SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 135 mm - Spindle speed: 8,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOLPOST - Number of positions: 3 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Footprint: 1500 x 770 mm - Machine weight: 1,400 kg EQUIPMENT - CNC control: Fanuc - Parts removal device - Parts ejector - Coolant tank - Electrical transformer The machine is under power and can be inspected at any time. If you have any questions or require further information, please do not hesitate to contact us. Disclaimer: Sale is exclusively to businesses within the meaning of § 14 BGB, not to consumers as defined by § 13 BGB. By placing an offer, the buyer confirms their commercial activity. All information in this advertisement has been provided to the best of our knowledge and belief. Errors, misprints, prior sale, and technical changes are expressly reserved. Only the characteristics specified in the written purchase contract are binding. The machine is sold without any warranty against material defects. Any warranty is excluded to the extent permitted by law. This exclusion does not apply to claims for damages arising from intentional or grossly negligent conduct or in the event of injury to life, body, or health. No guarantee or assurance of specific properties is provided. The machine is sold as inspected and under exclusion of any returns. Sale is ex works. Transport, loading, and shipping are at the buyer's risk and expense unless otherwise agreed in writing.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, control type: NC control, bar length: 3,000 mm, bar diameter (min.): 25 mm, bar diameter (max.): 72 mm, IEMCA Maxis 72 Bwsdpfx Ageykk Dmjkji

Condition: used, Manufacture : Volkmann Model : RNT 180 Type: Station for filling and emptying pouches, bags and other packaging. Connection for pneumatic transfer Bwodpfx Asyk Invogkoi Fine particle extraction system Aspiration : Multi Ejector + Vacuum pump G1800 Pneumatic filter cleaning system Air tank : FESTO CRVZS-2 (capacité 2 L) / Pression max : 16 bar Level probe Opening sensor Side vibrator 100% pneumatic unit 3 filters supplied with the machine

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. Bsdpfjyf Ibfox Agkswi With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG Bodpfx Agjx Eiuxokswi 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: new, Year of construction: 2025, functionality: fully functional, Description: New price: €45,000 – open to offers. For sale is a brand-new FMB Turbo 5-65 bar feeder, year of manufacture 2025. The unit has never been put into operation and is in mint, factory-new condition. The Turbo 5-65 is the ideal solution for loading bar stock with diameters from 5 to 65 mm into CNC lathes. Its robust cast iron bed ensures maximum running smoothness and precision. Technical data & highlights: - Year of manufacture: 2025 (new unit) - Condition: Unused / Original condition - Material diameter: Ø 5 – 65 mm - Control: Modern 8.4" touch operating panel (mobile) Bodpfoynb N Iox Agkswi - Feature: Highest vibration damping due to solid machine bed - Availability: Immediately from stock (no long manufacturer lead times) - Complete bar feeder including documentation and standard accessories

Condition: good (used), Pot diameter 600 mm Vibration: adjustable Bjdpfx Ash Rfffjgkjwi

Condition: good (used), Vibratory bowl for screwing technique Bsdog Anduspfx Agkswi Cup diameter 320 mm

Year of construction: 2016, condition: good (used), Hethon 61 Hopper and screw feed Bwjdjw Dhdfjpfx Agkei 2016, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock

Year of construction: 2016, condition: good (used), Hethon 51 Hopper and screw feed 2016, stainless, 50Kg hopper and outfeed screw, screw diameter 40mm, 3Ph, four in stock Bwjdpfx Aow Dg Ucegkoi

Year of construction: 2018, condition: good (used), Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Bedpfxew Dg Ipj Agkowi

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system Bedpfeyk Tlgox Agkewi - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Bsdpsuzn Nnjfx Agkswi Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, feed rate X-axis: 40 m/min, overall weight: 900 kg, roll diameter: 35 mm, total width: 6,000 mm, total length: 2,500 mm, total height: 1,200 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, roller diameter: 140 mm, transport height: 1,200 mm, transport length: 2,500 mm, transport width: 1,250 mm, input frequency: 50 Hz, power of feed motor: 1,500 W, This video demonstrates the feeder of a four-side planer processing an oak board. Technical specifications: Feeding speed: 5-60 m/min Minimum board length: 1.2 m Maximum board length: 6 m Minimum board width: 40 mm Maximum board width: 300 mm Minimum board height: 10 mm Maximum board height: 120 mm Bwsdpfx Agjyftgaekei Number of feed rollers: 2 Feed drive power: 1.5 kW each Chain conveyor drive power: 1.1 kW Feeders can be equipped with chain conveyors featuring various numbers of chains, different chain spacings, and conveyor lengths to suit specific requirements. ARBOR also offers design and manufacturing services for sawmill and woodworking lines of any complexity.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Bsdpfx Asv H R Dhsgkjwi Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: used, Year of construction: 1996, Bar loader FMB type Turbo ET 425 / 3000 stood on an Emco lathe Bedeugv Uaspfx Agkjwi