Used Pneumatic Punch for sale (8,927)

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 401792, total height: 3,000 mm, ram adjustment: 80 mm, total width: 2,000 mm, total length: 2,500 mm, pressing force: 90 t, distance between side stands: 800 mm, distance between stands: 730 mm, overall weight: 17,000 kg, year of last overhaul: 2001, sheet thickness steel (max.): 4 mm, space requirement height: 3,000 mm, sheet thickness aluminum (max.): 4 mm, Raster die-cutting machine HR 90 NL 4 S Stroke rate 50 - 250 Motorized die adjustment 0 - 80 Manual stroke adjustment 30 - 100 mm Unidor Compact Press (pressing force, tool locking, etc., renewed in 2019) Bwjdpfxj Afqdfj Aknsw Raster roller feed, up to 4 mm sheet thickness, 400 mm wide Waste shredder included.

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 Bwedpfez H H Dqex Aknsw The machine is currently not running but is still connected so that it can be used in an emergency for production. Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: good (used), Year of construction: 2004, I sell the automatic pneumatic end cutting saw OMGA T521 OPT 6600, year 2004. Input table automatic feeding 6,60m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with automatic cutting sequence modes. Fluorescent chalk sensor reader. Available immediately. Bjdoz Suzpepfx Aknjww CE version. Documentation included.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bodpjzlgf Isfx Aknjww Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device Bsdpoz Rmansfx Aknoww + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: good (used), Year of construction: 1999, High-quality veneer cutter with a maximum processing length of 3600 mm. Bwodpo Ahgaijfx Aknew Features a programmable width stop. Includes a spare blade.

Condition: excellent (used), Year of construction: 1998, TYPE BRIDGE FRAME HYDRAULIC CAPACITY 20 TONS CONTROL FANUC SERIES 18P TURRET 31 STATION THICK TYPE 3 AUTO-INDEX STATIONS 19 X A 6 X B 1 X C 2 X D AUTO INDEX STATIONS 2 X B 1 X C MAX TRAVERSE (WORKING AREA) 1270 X 1270 MAX SHEET SIZE ( WITH ONE REPOSITION) 1270 X 2540 MAX SIMULTANEOUS SPEED 82 METRES PER MINUTE MAX SHEET WEIGHT 75KG MAX SHEET THICKNESS 3.2MS MAX HIT RATE 1000 HITS PER MINUTE TABLE BRUSH TYPE WEIGHT 9.8 TONS COMPLETE WITH CHILLER NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 axis simultaneous Tape Code ... EIA or ISO (Automatic recognition) Programming Mode ... Absolute / incremental Min. Input ... 0.01 mm (0.010) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 digit T Function ... T - 3 digit M Function ... M - 3 digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb Max. No. Of Programs ... 191 Display ... 9" Colour LCD Bwedpfx As Affmneknow Machine Operation ... Memory or tape Punch Interface ... RS 232 C

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Bwsdpfx Aksz Dumzjnow Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Bwjdpfx Akexwn R Asnjw Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 55,000 kg, Punching and forming machine, manufacturer Raster Robust cast iron construction Lower part, side supports, and upper part braced with tie rods Hydraulic overload protection Press force monitoring Automatic stroke adjustment, 40 - 200 mm Bodpfxs Ahyr Ds Akneww Automatic ram adjustment, 150 mm Speed: 30 - 150 strokes/min Control system: S7 Raster: Hydraulic roller feed, 450 mm width, material thickness up to 4 mm Chip conveyor Mounting elements, Gerb

Year of construction: 2022, condition: used, A CNC punching and nibbling machine with workpiece positioning is offered for sale. Equipped with a large worktable, workpiece clamping devices, foot switches and a hydraulic power unit. Inspection possible by arrangement. Bwodpfo Aga Imox Aknsw

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Length: 480 mm Width: 400 mm MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Bodo Adunrepfx Akneww Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Bwjdpfxs Aduyze Aknsw Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: refurbished (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 100 mm, pressing force: 150 t, Raster die-cutting machine Mechanically overhauled in 2022 Control system: Siemens S7, 2017 Feeder: Zehnder & Sommer Alternatively: Raster pneumatic roller feeder Bwjdj Ahyu Repfx Aknjw Number of strokes: 40 – 150 Ram stroke: 30 – 120

Year of construction: 2020, condition: new, ARTES DN150 PN100 Pneumatic Control Ball Valve – ProTACT – SAMSON 3730-3 For sale: Industrial control ball valve manufactured by ARTES Valve & Service, equipped with a ProTACT pneumatic actuator and SAMSON 3730-3 HART positioner. Complete assembly, supplied in a wooden transport crate. Valve specifications: * Manufacturer: ARTES Valve & Service * Type: Control Ball Valve 150 W * Nominal diameter: DN150 * Pressure rating: PN100 * Operating pressure: 47 bar(g) * Operating temperature: 385°C * Body material: 1.0460 * Kvs value: 230 m³/h * Opening angle: 90° * Year of manufacture: 2020 * Serial number: 3162026.1 * Tag number: 83-PCV-800 * Flanged connections Pneumatic actuator: * Manufacturer: ProTACT GmbH * Type: PRY.B2.401S.04.2530KΦ100/ * Reference: HPY-B2-401-SRC4+HT * Supply pressure: 4–6 bar * Temperature range: −15°C to +150°C * Spring action: Clockwise (CW) * Serial number: IS-200162-1-1 Positioner: Bwodpo Ahic Hefx Aknjw * Manufacturer: SAMSON * Model: 3730-3 * Type: HART-compatible pneumatic positioner * Input signal: 4–20 mA DC * Maximum supply pressure: 7 bar * ATEX marking * Integrated position indication and diagnostics Condition: Excellent visual condition, stored in protective packaging inside a wooden crate. Operating condition has not been independently verified. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching performance Press force: 30 t Table Table dimensions: 480 × 400 mm Feed Straight feed: available MACHINE DETAILS Condition Machine: refurbished Dimensions and weight Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Bwsde Adu I Espfx Aknjw Straight feed

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Bjdps Ahkq Sjfx Aknsww Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: used, Year of construction: 2017, Schuler BEUTLER press Bedpfx Ako Afk Nbjnjww Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 30 t WORK TABLE Table dimensions: 480 × 400 mm MACHINE DETAILS Dimensions (L × W × H): 1,100 × 800 × 2,000 mm Weight: 3,000 kg Condition: Refurbished EQUIPMENT Feed control Bodpfx Aj Adu Hboknsww

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Bodoz Snchjpfx Aknoww Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 3,00,01,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Bwjdpfxsxrnggs Aknow Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Year of construction: 2004, condition: excellent (used), LARIUS 10:1 pneumatic press Bsdpfxsz Sk Uye Akneww For sale: a pneumatic press from the renowned company LARIUS, manufactured in Italy. This device is designed for dispensing high-viscosity liquids – ideal for lubricants, adhesives, industrial paints, silicones, etc. Technical specifications: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Output: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Manufacturer: LARIUS – Italy In very good condition.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Bwedpfx Akevbfbwjnow Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Schaal Machine type: Punching machine PRESS DATA Press force: 100 kN Table dimensions: 380 × 160 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,900 mm Bwodpfx Akj Ad D Hdonsw Weight: 5,000 kg EQUIPMENT Loadgard press force indicator Feed system

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 tons Stroke rate: 400 strokes/min Material and feed data Sheet width: 180 mm Strip width: 180 mm Feed length: 150 mm Stroke data Stroke: 10–80 mm Control and electrical system Control: KAISER Voltage: 380 V Dimensions Space requirement: approx. 1.85 × 2.70 × 3.00 m EQUIPMENT Original KAISER strip feed, model ZR 18 D Bsdpfxe Aa Nhle Aknoww