Used Point for sale (3,778)

Condition: used, functionality: unexamined, Ferwood Code: RU0008933 - Manufacturer Code: 631417400 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ksdpfsv Hp A Aox Ai Eolt

Condition: used, functionality: fully functional, machine/vehicle number: PT 320, Drill point thinning machine. 3000 rpm, grinding wheel diameter 8" Kodpfxex Trqno Ai Ejlt Power supply 380V / 50Hz

Condition: used, Bacci 1-Point Oscillating Mortiser Kljdpswdfh Usfx Ai Ejt

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Kljdpfx Aijymadue Eet Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS63 Kodpfxjymadno Ai Eslt Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Number of strokes: 560/min Ksdpsymac Rjfx Ai Eslt Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Kedpoymadhjfx Ai Ejlt Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Klsdpfoymacwex Ai Eet Model of introduction duo: R25 Tools: Rotating hammers

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: Kodpfjg Rw Ntox Ai Eolt 
Wet grinding device
 surface planer device machine light
 pneumatic workpiece clamping

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Ksdpfx Aewd Irvsi Eolt Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: good (used), functionality: fully functional, -KOM 3081- A non-rotating live centre is being offered here. This is not a typical MK or SK holder. Technical data: Weight: 25 kg Smallest diameter: approx. 88.5 mm Largest diameter: approx. 100 mm Shank length: approx. 234 mm Klodpfx Aiewxup Rj Est Weight: approx. 25 kg

Condition: excellent (used), functionality: fully functional, CG 3 – Holding Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and a patented hold-down system. Designed for burr-free grinding of holding points while maintaining the functionality of the rubber ejection material. The pneumatic drive uses compressed air to deliver very high and consistent traction force, available at all times without the need for charging cycles or battery changes. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding, enabling the operator to grind the holding points straight and accurately in position. The depth of the holding point is precisely set using the depth adjustment. The patented hold-down system for rubber ejection and stripping materials prevents grinding into the rubber or profile. The advantage: fewer and smaller holding points are required, and the performance of the die rubbering remains intact. The holding point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for both corrugated and solid board. With diamond grinding wheels, breakers can be optimally set. Compared to stone grinding wheels, diamond wheels are extremely robust and thus more resistant to breakage. They are also more durable and sustainable. Each holding point grinder comes supplied with the correct size diamond grinding wheel for the machine. In addition to the holding point grinder, manual holding point tools are ideal for use. The chisels can enlarge the holding points after grinding if required. Two manual holding point tools are also included in the package at no extra cost. Advantages at a glance: Pneumatic drive for consistently high traction force Large support surface for straight, precise grinding of holding points Patented hold-down system for solid and corrugated board Klsdpfx Aoxltkqei Eet Note: The unit operates with diamond grinding wheels size 50 × 8 mm.

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Kjdpfxsxxu Spe Ai Eelt Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Klodpjxxu U Dsfx Ai Eet Total height : 1500 mm Weight: approx 250 kg

Condition: used, Bar pointing/chamfering machine PAREX Kljdpfexdnwpsx Ai Eot

Condition: good (used), Poeth dust point filter KMV 6/20R15 Approx. 8 m2 filter surface Klsdjwygb Iepfx Ai Eot Fan motor power 1.1 kW, 3000 rpm Equipped with new membrane valves

Condition: excellent (used), Tailstock for PINACHO Lathe Kledpfxsyr E Dws Ai Ejt Centre height: 180 mm Cone: CM3 Spindle exit: 160 mm Sole dimensions: Length 210 mm x Width 160 mm V Spacing: 135 mm In very good condition

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 Klodst A Uwtjpfx Ai Est connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) Kodpfx Aiex E T Uxo Eslt - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: good (used), Year of construction: 2011, CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Extraction Table 1 Oxy-fuel torch Cutting thickness up to 150 mm 1 Plasma marking unit Kjellberg Laser pointer Technical Data in Detail: 1x Oxy-fuel torch (1 x fully automatic) 1x Plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module Macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic height control via arc voltage USB2.0 connection for storage media Module Remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® Plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® Plasma marking system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device Klodpfjudn Rzex Ai Eot 19526

Condition: like new (used), As new with many accessories. Ksdpfxexga Sqo Ai Eolt

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version) Kledpfxoy Dibxj Ai Ejt

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Kljdpexc Nypefx Ai Eet Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm Kjdsvg Thispfx Ai Eelt total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm *

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Build in 2015 Kledeg A Hcxjpfx Ai Eet Pressure 14 bar