Used Polymer Systems for sale (36,001)

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min. Rbodpfovcyw Asx Adbet

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Rbjdpfxoxiwg Rj Adbot Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams

Condition: excellent (used), Year of construction: 2022, operating hours: 7,500 h, functionality: fully functional, The used Sypro Dual 200 basic feed unit for UPS 3 for continuous or intermittent blister lines (width 700mm) is being sold due to the purchase of a new system. The machine was commissioned at the end of 2022. Tablet buffer supply with reject separation, 500mm buffer hopper, and 2 feed chutes. The first chute conveys products from the buffer hopper. In the second chute, products pass between two plates. The lower plate has holes through which broken pieces fall out. Removable tablet storage funnel. Axis: All axes are driven by servo motors. The feeder features the following axes: X, Y (crosswise and lengthwise to the film), upper and lower pin actuators for separation, Z-stroke for lifting from the film. Control: Machine control via Sigmatek RPS. Up to 500 products can be saved with all settings. Four access levels. Event logging. Performance: Redpfx Adow Npgqobjbt Throughput of the basic unit: 60 dosing cycles/min max. Maximum film speed: 20m/min Documentation: Various maintenance manuals Noise level: < 70dBA

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Rsdpfou Hgllox Adbjbt Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: repair required (used), functionality: limited functionality, Year of construction: 2013, Printer Projet 3500HD Max 3D printer, maintenance necessary and in need of repair. Rbsdpfownbb Esx Adbjt

Condition: used, functionality: limited functionality, Year of construction: 2013, Projet 3500HD Max 3D printer, in need of maintenance. Rbedpfx Adjwnbcijbst

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, 3D Systems Projet 3500HDMax 3D Printer - bought in 2013, good condition, functional. Rodswnbd Hjpfx Adbobt

Condition: used, Screen printer, manufactured by Rehm Thermal Systems GmbH Type: RDS 3800/500 G Power: 38 kW System description: Rsdpfx Aewbt Ecedbsbt • in the front area, ceramics are printed via a rotary indexing table • they are then transported via a shuttle into the approx. 20 meter long continuous furnace • temperature: 120 °C • at the end of the furnace, the ceramics are removed and sorted back into the magazines

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 937 h, 3D printer manufacturer 3D Systems Project 2500 plus Year of construction 2021 Redpouvingjfx Adbsbt Total printing time 937 hrs.

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm Rjdpjxc Ew Dofx Adbebt See our other ads VMA Wekerom

Year of construction: 2016, condition: used, In stock first week of September Rbjdsw S Dn Ijpfx Adbst

Year of construction: 2009, condition: used, functionality: fully functional, Span: 35 m Rbedpfx Ajt D H H Asdbet Load capacity: 130 tons Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane

Condition: ready for operation (used), Stainless steel Mixer Tumbler 300 litre mixer tumbler Size 730 mm diameter x 700 mm deep Rsdpfx Ajxpfziedbebt Scrape mix arm Variable speed mix arm Capacity 300 Litres Tipping discharge by motor drive Hinged lid

Year of construction: 2018, condition: used, Ice Machine Make: Ice Systems (UK) Model: F2AS Built 2018 Rbsdpfx Ajwp R Rlsdbjt Produces Flake Ice Capacity: Rated at 2 ton per 24hrs With stand, in cabinet Touch screen controls

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, 2 x Case packing systems with bale arm tray palletiser's. Includes; 2 x CLP case packing systems previously used for heat sealed plastic trays. 2 x Dicoma bale arm tray palletiser's. 2 x Case packing systems tray de-nester's. Year on manufacture 2016 The machines can be sold as one or can be split into two individual lines. Rbedpsvzx Tmefx Adbjt

Condition: good (used), Year of construction: 2022, 1 x Reach Food Systems butter melting pan Model: T75 Rbedpfxowp In Us Adbjt Year: 2022

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15.10, total height: 2,500 mm, total width: 1,400 mm, total length: 2,400 mm, type of input current: three-phase, control voltage: 415 V, input frequency: 50 Hz, ic systems automatic bottle filling machine with conveyor. Model 5.5.1 Automatic Isobaric Microblock. Used for rinsing, filling and capping bottles. Suitable for beer, wine and soft drinks. Processes 500 bottles per hour. Fits crown caps of 26 - 29mm. Unit has 5 rinsing nozzles, and 5 filling turrets. Rbedpfx Aewg Sdusdbot NO VAT

Condition: not inspected (used), Year of construction: 2002, Sterling Fluid Systems TD20D skid mounted pump Serial no: 0222034/1 (2002) 8500 litre/min Rbodpfxewdxq As Adbet 9 bar 340mm impeller diameter With Firepac (by Cummins Diesel) drive and wall mounted control

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Rodeu U Ai Hjpfx Adbobt

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Rjdoxd D I Repfx Adbsbt

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Rbjdpfoyf Dr Hsx Adbst Operating hours: 70,263 h

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 1,00,000 g, TECHNICAL DETAILS Rsdpfxsyf A U Hj Adbjbt Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Year of construction: 2003, operating hours: 64,363 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-22267, MACHINE DETAILS Redsyf A E Sjpfx Adbsbt Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 64,363 h

Year of construction: 2003, operating hours: 59,762 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-26298, MACHINE DETAILS Dimensions & Weight Weight: 182 kg Dimensions (L x W x H): 880 x 660 x 1,150 mm Operating hours: 59,762 h EQUIPMENT Robot handheld control device Rbjdpfxsyf Apqe Adbjt

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm MACHINE DETAILS Dimensions & Weight Redpfxeyf Aiwj Adbebt Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V