Used Polymer for sale (110)

Condition: like new (used), TA Instruments Discovery HR-1 – Hybrid Rheometer with Temperature Chamber Technical description of the device Manufacturer: TA Instruments, USA Model: Discovery HR-1 Series: Discovery Hybrid Rheometer Device type: Rotational-oscillatory rheometer Temperature system: Two-wing heating chamber, possibly an ETC (Environmental Test Chamber) Technical characteristics The TA Instruments Discovery HR-1 is an advanced hybrid rheometer designed for the precise investigation of the rheological properties of liquids, semi-finished products, polymers, pastes, gels, and viscoelastic materials. The device enables measurements in controlled stress mode, controlled shear rate mode, and oscillatory testing. The rheometer's design utilizes a precise drive system, a torque measurement system, and a gap control system. Technical parameters – Discovery HR-1 The following values are approximate catalog parameters for the HR-1 model and require confirmation for a specific device version. Parameter | Value ----- | ----- Type of measurement | Rotational and oscillatory Minimum oscillatory torque | approx. 0.5 nNm Minimum rotational torque | approx. 10 nNm Maximum torque | 150 mNm Angular speed range | up to 300 rad/s Oscillatory frequency range | up to 100 Hz Angular displacement resolution | approx. 10 nrad Gap control | Automatic Control modes | Stress, shear rate, oscillation Computer control | TA Instruments TRIOS software Temperature control system The device shown in the pictures is equipped with a two-part heating system that opens to the sides. The chamber enables rheological measurements to be carried out under controlled temperature conditions. System characteristics: Hedox E Sm Hopfx Airsw * Two-wing design of the heating chamber. * Electric heating system. * Temperature control of the sample. * Possibility of conducting temperature studies. * Thermally insulated chamber elements. * Connections for the temperature control system. If the use of an ETC chamber is confirmed, the typical temperature range may be approximately -160°C to +600°C, depending on the configuration, cooling system, and accessories used. This range is not confirmed for the offered unit. Available research methods Rotational studies: * Viscosity measurement as a function of shear rate. * Determination of flow curves. * Study of the yield point. * Analysis of the behavior of non-Newtonian materials. Oscillatory studies: * Measurement of the storage modulus G'. * Measurement of the loss modulus G''. * Analysis of the loss tangent tan δ. * Frequency tests. * Amplitude tests. * Analysis of structural transitions of materials. Time and temperature studies: * Creep and recovery tests. * Stress relaxation. * Thermal stability studies. * Analysis of changes in rheological properties as a function of temperature and time. Configuration of the offered device Based on the photographic documentation, the set includes: 1. TA Instruments Discovery HR1 rheometer 2. Two-wing temperature chamber. 3. Accessories visible in the pictures 4. PC and software The device is a professional measurement platform designed for advanced rheological analyses in industrial and scientific laboratories.

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. Hsdpfjw Tc Upox Airsw This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Year of construction: 2022, condition: new, functionality: fully functional, Physical & Physical-Chemical Properties • Product Number: 046034 • Column Dimensions: 4 mm ID × 200 mm Length (Standard Bore, Analytical Format) • Stationary Phase Packing Material: Ethylvinylbenzene / Divinylbenzene (EVB/DVB) macroporous polymer. • Crosslinking: 55% • Particle Size: 9 µm • Pore Size: 2000 Å • Anion Exchange Capacity: 52 µeq per column • Functional Group: Alkyl quaternary ammonium • Maximum Pressure Limit: 4,000 psi (275 bar) • Solvent Compatibility: pH 0 to 14; compatible with 0 to 100% HPLC solvents • Hardware Interface: Device Monitoring Enabled and Viper Fitting Ready Recommended Standard QAR Operating Conditions • Eluent Composition: 2.7 mM Na₂CO₃ / 0.3 mM NaHCO₃ (Sodium Carbonate / Sodium Bicarbonate) • Flow Rate: 1.50 mL/min • Operating Temperature: Ambient temperature • Detection Method: Suppressed Conductivity • Recommended Suppressor: Dionex Anion Self-Regenerating Suppressor (Dionex ASRS 300 4mm or equivalent) operated in AutoSuppression Recycle Mode. • Applied Suppressor Current: 22 mA Hodpfx Aio Aay Rqerew • Injection Volume: 10 µL • Storage Solution: 100 mM NaOH (Sodium Hydroxide). Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: MX7_990126, grinding spindle motor power: 38,000 W, power: 38 kW (51.67 HP), workpiece diameter (max.): 300 mm, disc diameter: 203 mm, 5-axis CNC tool grinding machine – available used or refurbished. High-performance production machine with a polymer concrete bed (ANCAcrete), directly driven 38kW spindle, 6-position disc changer, automatic pallet loading (max. 520 tools, 15s), and steady rest preparation. Ideally suited for the production of carbide and HSS tools in a production environment. !Offer only available in Europe, Africa, and the Middle East! Hsdpeq Sud Rjfx Airjw

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Hodpfx Aiewqydwerow Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Hsdpfoy At N Rox Airew Berstorff ( Krauss Maffei ) compounding extruder Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system, complete incl. pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Hjdpsppucaofx Airew Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 Hodpfx Aisx Dkmgjrow For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) Hsdpfx Aiouiq Dhsrjw 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 1,18,000 km, power: 265 kW (360.30 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Manufacturer MAN Model TGS 26.360 6x4H?4 Wiedemann Stainless steel / Edelstahl tank Year 2019 Condition Very good Serial Number WMA35SZZ7KM816181 Ref. nr. 1107870 Reg. date: Hk: 360 Km: 118000 Gearbox: Manual (ZF 16 S 222 OD Servo-Shift) Eurotype: 6 Diesel tank: 1 Tank liter: 390 L Rear view camera: ? Air conditioning: ? Cabin type: TGS Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385 / 65R22,5 - 315 / 80R22,5 - 385 / 65R22,5 Cover% left 40% 40% 80% Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26.000 Kg Net weight: 17.500 Kg Load capacity 8.500 Kg Manufacturer: Wiedemann Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Tank capacity reject water tank: 3600 L High pressure pump: Pratisolli KF36 - 120 l/min 120 bar High pressure pump hours: 108 Polymer pump: Allweiler SNP 25.1 - 2.4 m3/h Polymer pump timer: 917 Sludge pump: Allweiler AEB 1F 553 - 30 m3/h Sludge pump hours: 931 Vacuum pump: Samson V15 (KS725) - 850 m3/h Vacuum pump timer: 1454 Hjdpfx Aewqvu Eeirow Remote control: ? Water heater: ? Suction hose 3": 1x30m + 2x15m Flush hose: 1x30m 1/2" + 1x30m 3/4" + 1x8m 1/2"

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food Hjdjxl Er Hjpfx Airow

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. Hjdpfez Alnpox Airsw The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls

Condition: like new (used), For Sale: Complete EOS P110 Setup – Ready for Immediate Use This fully inspected and revised EOS P110 is in outstanding condition, as seen in the photos—it looks practically new! This setup is ready for immediate use and ideal for expanding or starting your SLS production line. Included in the package: • 2 Build frames • Set of hoppers • Unpacking station with sieve • Material mixer Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Construction volume: 200 x 250 x 330 mm • Laser type: Coherent CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 material is designed to match or exceed the performance of OEM powders while offering significant cost savings. By switching to our materials, you can lower your production costs without sacrificing quality. Services Included: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the industry leader in providing top-tier refurbished EOS SLS machines with comprehensive support services. As the only provider offering end-to-end solutions for used EOS equipment, we pride ourselves on unmatched expertise and reliability. What we offer: Hedoryvilepfx Airew • Expert service: Installation, maintenance, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-saving, high-quality consumables like our plug-and-play PA12, designed specifically for EOS systems. • Unparalleled support: From transport to maintenance plans, we handle it all. Trust IM3D for high-performance machines, superior materials, and the expertise to keep your SLS production running smoothly. For more information or inquiries, feel free to reach out!

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Hsdpfsuy N S Usx Airsw Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: used, This listing is for the Malvern CHR6000 + CHR7100 OMNISEC RESOLVE and REVEAL GPC/SEC These units are in full working condition and ready for immediate use What the System Measures Hodpfoychy Aex Airow The combined OMNISEC RESOLVE and REVEAL GPC/SEC System provides absolute molecular weight, intrinsic viscosity, concentration, and conformational data in a single run. This eliminates the need for calibration standards, improving accuracy and confidence in results. OMNISEC RESOLVE – The Chromatography Module OMNISEC RESOLVE integrates four key components into a single unit: Pump: Delivers a flow rate range of 0.01–10 mL/min with low pulsation (0.15% at 1 mL/min in water), ensuring stable baseline signals. Degasser: Features a low-volume (960 µL) design for rapid solvent exchange, enhancing system productivity. Autosampler: Accommodates up to 192 samples, with temperature control from 4°C to 60°C, suitable for both vials and 96-well microtiter plates. Column Oven: Controls temperatures up to 65°C, supporting up to six analytical columns for optimal separation conditions. This integrated design minimizes baseline noise and enhances measurement sensitivity, particularly for low-concentration or low-molecular-weight samples. OMNISEC REVEAL – The Detector Module OMNISEC REVEAL is an advanced, fully integrated, temperature-controlled multi-detector module that includes: Refractive Index (RI) Detector: Highly sensitive and stable, enabling accurate concentration measurement, even for low-concentration samples. UV/Vis Photodiode Array (UV-PDA) Detector: Measures absorbance at any wavelength from 190 to 900 nm, providing versatile detection options. Light Scattering Detectors (LALS & RALS): Deliver market-leading sensitivity, allowing measurement of molecular weights as low as 200 g/mol and injection masses as low as 100 ng, for highly reliable results. Viscometer: Features automated balancing for precise intrinsic viscosity measurements, with a user-exchangeable capillary bridge to minimize maintenance. The fully temperature-controlled design improves detector stability and overall sample characterization, ensuring optimal performance for sensitive applications. OMNISEC Software The OMNISEC software suite provides: Unified instrument control, data acquisition, and analysis. Calculations for molecular weight (Mn, Mw, Mz), polydispersity, radius of gyration (Rg), intrinsic viscosity, and Mark-Houwink parameters. Support for automated, unattended operation to streamline workflows. Key Advantages Exceptional Sensitivity: Measures molecular weights down to 200 g/mol and injection masses as low as 100 ng. Broad Wavelength UV/Vis Detection: Enables absorbance measurements across 190–900 nm. Superior Stability: Temperature-controlled detectors ensure consistent, high-quality results. Versatility: Ideal for polymers, polysaccharides, and proteins, with multi-detection SEC offering unmatched characterization detail. Integrated Design: Reduced inter-detector volume improves peak resolution and data quality. Accurate Viscosity Measurement: With automated viscometer balancing, ensuring reproducibility.

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Hjdpferm Tdwjx Airsw Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Hjdpfx Aeppddyjirew Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Hjdsvzlgaepfx Airow Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Hedjppa Tgspfx Airjw Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Hedszrnxcspfx Airjw Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Hedsu Ttf Njpfx Airsw Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// I am offering a new industrial pump WITTE Pumps & Technology – model CHEM 1.48-14-14, designed for demanding applications in the chemical and process industries. ✅ Key information: Manufacturer: WITTE Pumps & Technology GmbH (Germany) Model: CHEM 1.48-14-14 Year of manufacture: 2022 Condition: NEW (warehouse stock) Certification: ATEX (Ex) – suitable for operation in explosive hazard zones Motor: ABB Motor power: 0.75 kW Speed: approx. 2870 rpm Protection class: IP55 Power supply: 3~ 400V / 50Hz ⚙️ Applications: chemical industry petrochemicals plastics/polymer processing dosing and transfer of process liquids Hjdpfx Ajz Smupsirjw ✔️ Features: robust, industrial construction high precision and efficiency Ex (ATEX) rated – safe operation in demanding environments german manufacturing quality 📦 Set includes: complete pump with motor manufacturer’s documentation ℹ️ Condition: Device is new, unused – may show minimal signs of storage.

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Pump technology: optional on request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Hodpfx Aijrk Ebkorsw Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C Hsdpfxoxcbnre Airow THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Hodpfx Ajfn Iudjirsw Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h