Used Polymer for sale (98)

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Bsdpfezump Ejx Abtowt Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix Bwedpfexhdxqox Abtet How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Year of construction: 2020, condition: excellent (used), Laiyi LY-ASCP100-1800 is a single-sided extrusion laminating line for paper packaging applications, specifically for paper cups and bowls. The machine is designed to extrude a thermoplastic polymer directly onto a substrate and bond them together in a single, continuous process. Year of installation: 2020 Condition: very good Main technical specifications: Media width up to 1800 mm Laminating width 800 - 1700 mm Rewinder/unwinder diameter Ø1600–1800mm Media thickness 30-400 gsm Extruded resin: LDPE/PP/PBS/EAA (Screw No.1, 110kW, max 400kg/h) Coating thickness: LDPE 8 - 20gsm, PLA 25-45 gsm Machine speed up to 250 m/min 3 Corona units (12kW + 8kW + 8 kW) Bwedozt Rziepfx Abtjt

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Bwsdpfx Aberklx Ietjt Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Bwjdpfxsfiulfo Abtst Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG Bwodpfx Abezl Hz Netst HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric Bwodpsuiq Dhsfx Abtst • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. Bsdexcnxdspfx Abtjwt The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach PVB150 Mobile Cold Asphalt & Emulsion Mixing Plant Bodpsykad Aofx Abtewt Turkey’s First Fully Mobile Dual-Mode Plant! Polygonmach PVB150 is a cutting-edge mobile solution specially designed for cold asphalt production, emulsion-based mixes, and road maintenance materials. This powerful system supports Volumetric and Batch operation modes — all in one compact and mobile unit. Whether you’re building rural roads, patching highways, or producing environmentally friendly mixes, the PVB150 delivers performance, flexibility, and cost savings directly to your jobsite. ⸻ ✅ Specialized for Cold Mix & Emulsion Applications • Cold Asphalt Mixing Mode: Up to 200 m³/hour on-demand production, perfect for binderless and emulsion-stabilized mixes • Emulsion Mixing Mode: Precise control for polymer-modified bitumen and emulsified asphalt blends • Low-Temperature Operation: Energy-efficient and ideal for off-grid, rural, or urban environments • Recycling-Ready: Supports RAP (recycled asphalt pavement) and eco-friendly binder integration ⸻ ? Advanced Design – Built for Road Projects • 3x8 m³ aggregate hoppers, 5-ton cement/emulsion silo, and integrated water/additive tanks • High-precision weighing & dosing for binder, aggregate, and water • Fully automatic or manual operation via smart control panel • Mobile frame with self-lifting chassis – set up in 10 minutes • On-site production = zero material waste, no transportation delays ⸻ ?️ Multiple Functions – One Mobile Solution In addition to Cold Asphalt and Emulsion, PVB150 can also operate as: • Mechanical Stabilization Plant • Soil Compound Mixing Plant • Standard Concrete Plant (Volumetric + Batch Modes) ⸻ ? Mobile | Sustainable | High-Performance | Made in Turkey Say goodbye to fixed-site plants and expensive transport. With Polygonmach PVB150, your site becomes your plant. ⸻ ? Contact us today and take control of your road projects! ? ? ?

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Bjdjy Au Arepfx Abtowt Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: excellent (used), functionality: fully functional, Anton Paar Physica MCR 301 Modular Rotational Rheometer Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Machine Type: Modular Rotational and Oscillatory Rheometer Country of Origin: Austria (Graz) Bodpszicwuofx Abtjwt For sale is a used Anton Paar Physica MCR 301 rotational rheometer. This laboratory device is suitable for the rheological characterization of liquids, pastes, polymers, dispersions, emulsions, and other materials in research, development, quality control, and industrial material testing. Technical Data Measuring Principle: Rotational and Oscillatory Rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Integrated normal force measurement Modular measuring system for various measuring geometries Power Connection: AC 100–240 V Power Frequency: 50–60 Hz Power Consumption: 850 W Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measuring Functions Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Software / Interfaces Anton Paar Rheoplus Software (Original CD) Device driver and license diskette included RS-232 interface Ethernet interface (depending on the configuration) Operation via LCD display and foil keypad Environmental Conditions Operating Temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage Temperature: −20 °C to +50 °C Relative Humidity: 20–60 % (non-condensing) Equipment Air-bearing precision drive Measuring head Measuring platform LCD display Electronic control Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Application Areas Rheology Material testing Quality assurance Research and development Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Universities and testing laboratories Condition Used Optical condition as shown in the pictures. Scope of Delivery Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Bosch Diffusion Welding Machine Bjdpfeg Icfpjx Abtswt The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2020, functionality: fully functional, Machine designation BRINOX Process System / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of manufacture 2020 Technical Data Design as a stainless steel process skid in hygienic execution. Conductivity measurement 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. Flow measurement 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. Pressure measuring points −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 or ½", e.g. DIN EN ISO 228. Temperature measuring points −50 °C to +200 °C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. Limit level sensors, digital (DI), hygienic connection DN 50. Multiple position feedbacks with IO-Link / digital. Pneumatically actuated on/off valves (DO) in stainless steel hygienic design. Product-contact materials according to EN 1.4435 / 1.4404 (AISI 316L). Documented surface roughness of product-contact surfaces Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process plant for pharmaceutical and biotechnological applications. Suitable for cleaning process lines and vessels under GMP conditions. Construction Welded stainless steel skid with orbital welded piping. Hygienic clamp and sterile connections. Fully instrumented with flow, pressure, temperature, and conductivity measurement. Pneumatic valve technology with digital feedback. Components from renowned manufacturers such as Endress+Hauser, Gemü, Samson, SICK, and others. Clean, GMP-compliant execution. Condition New. Original packaging. Unused. Never installed or commissioned. FAT / Documentation Status Fully documented Factory Acceptance Test carried out. Layout drawing inspection documented. Maintenance and calibration accessibility check documented. Surface roughness test documented. Leak test documented. Sensor calibration documented. Welding documentation fully verified. Complete Documentation List FAT plan and FAT report. P&I diagram. Layout drawings. Material lists for metals and polymers. Material certificates 3.1. WPQR, WPS, welder qualifications. Welding protocols and isometrics. Calibration certificates for measuring instruments. Surface roughness measurement protocols. Leak test protocols. EU declarations of conformity for installed components. Operating documentation. Special Features GMP-compliant, fully documented manufacturing. Bjdpeyl H Svjfx Abtjwt High-quality instrumentation. Very low documented roughness values. Immediately available. Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements.

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 Bjdpfsw Tc Upsx Abtewt • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): Bedpfszix Ddex Abtowt - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Bodpsppucasfx Abtewt Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Bodjwqydkspfx Abtswt Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, Year of construction: 2007, System: Mobile sludge dewatering system, mobile decanter/centrifuge Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP51 Mach. no.: H3991 Year of manufacture: 2007 Maximum drum speed: 3400 l/min Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other: Steel exchange case with reinforced base, Bedpfovz Dnpsx Abtjwt Accessories: Pump for sludge inlet, flocculant suction pump, flocculant solution pump Flocculant station: 2 chamber system for liquid polymers with agitator, adjustable Double shaft paddle mixer: galvanized steel Total weight: approx. 4200 kg Purchase and rental possible.

Condition: used, Year of construction: 1994, Available from May Bwedpfx Absyxl R Eetot Name: Used mobile sludge dewatering system in container Manufacturer: Alfa Laval Type: AVNX 919 Year built: 1994 Max. bowl speed: 3.250 rpm Material: Stainless steel Inner diameter drum: 353 / 202 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: L 7.500 x W 2.450 x H 2.550 mm Empty weight: Approximately 6-7 tons Technical doc.: Yes Message: Available from May Accessories: Container, polymer plant, feed pump, control cabinet, macerator, discharge conveyor Condition: Second hand Price: On demand

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: MX7_990126, grinding spindle motor power: 38,000 W, power: 38 kW (51.67 HP), workpiece diameter (max.): 300 mm, disc diameter: 203 mm, 5-axis CNC tool grinding machine – available used or refurbished. High-performance production machine with a polymer concrete bed (ANCAcrete), directly driven 38kW spindle, 6-position disc changer, automatic pallet loading (max. 520 tools, 15s), and steady rest preparation. Ideally suited for the production of carbide and HSS tools in a production environment. Bwsdpfsq Sud Rjx Abtst !Offer only available in Europe, Africa, and the Middle East!

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW Bedex Dkmgopfx Abtewt • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Bsdewm Nq Espfx Abtowt • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Bodpfx Abjy Drl Hjtswt Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Bwedjxl Er Hspfx Abtjt Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: used, Year of construction: 1997, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm Bedpfx Abowv D Uwetowt - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders