Used Pouwels Def 100 for sale (40,122)

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Lodpfx Aaext Hn Sjnsak Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Lodpfx Aaeufi Rxenjak Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-95 is a middle model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-95 includes two stages of crushing process which is made by primary jaw crusher and cone crusher. Lsdpfx Aaewa Smionoak TECHNICAL SPECIFICATIONS: - Bunker: 20 m3 - Plant Dimensions (1st chassis): 11500x4600x4200 mm - Second chassis: 15500x4650x4400 mm - Production Capacity: 100-180 Tons Per Hour - 1st Crusher: Jaw Crusher – 900x650 mm - 2nd Crusher: Secondary Cone Crusher – FABO CC 200 - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks - Total Motor Power: 315 Kw - Generator (optional): 400 kvA MCK-95 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated Laodpfx Aaen E N N Eenjk It has a heating coil running along the entire height of the tank Wed. 3.15m Height 16.50m

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Lajdpfx Aaovccqxsnsk Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Lasdjvb T Ewjpfx Aansk Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: new, functionality: fully functional, Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Lasdpfx Ajv Ebh Ieansk Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit or universal fit (depends on variant) ✔️ Key Features: ✅ Noise Reduction – Designed with internal chambers and baffles to minimize engine noise ✅ Enhanced Performance – Optimizes backpressure for improved engine efficiency ✅ Durability & Corrosion Resistance – High-quality metal construction for long-lasting performance ✅ Efficient Emission Control – Helps in reducing harmful emissions from the exhaust gases ✅ Easy Installation – Direct-fit design for Nissan models or universal fitting options

Condition: excellent (used), For sale: CNC tool holder GARANT (Hoffmann Group) – model SK40-16-100. High-quality clamping system for milling machines and machining centres, ideal for precision metalworking. • SK40 taper – industrial standard • Clamping diameter Ø16 mm • Length 100 mm • Balancing G2.5 – up to 25,000 rpm • Max. tightening torque 50 Nm • Premium brand – GARANT (Hoffmann Group) • Very good condition, used, fully functional – equipped with cutters/drills. -- PRICE IS FOR 1 PIECE -- Lajdpfsw Sy Epox Aanok

Condition: new, functionality: fully functional, overall weight: 21,360 kg, Year of construction: 2025, Jaw Crushers generally crushes 100 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 100 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Lsdpfxoxc Uivs Aanoak FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Turning heart diameter 100 mm Ljdpfxsln Ukcj Aanjak length 380 mm width 160 mm thickness 32 mm weight 4 kg other sizes on request

Condition: used, Tank capacity (litres) 100 Motorized pumps Ledpfxjvpfhys Aaneak Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Lasdpfjwk Dwnsx Aansk

Year of construction: 2019, condition: new, Wraparound heat-shinkable MIS - 65 1120 - 650 CW BK/T SP Laedpfxeih R Icj Aansk 127030 - 12200650026-040 Prize per unit carton

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Laedsw Sy D Ejpfx Aanok

Condition: new, functionality: fully functional, Year of construction: 2025, Jaw Crushers generally crushes 100 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 100 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG Laedpfxexcu Hns Aanek • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2024, functionality: fully functional, New filling machine suitable for dispensing liquids. Suitable for: - Milk - Water - Alcohol - Disinfectant - Etc. This is a very robust machine that runs on air and 220V power—plug and play! Ideally suited for filling small batches. Only a very small compressor is required to operate the machine, and one can be supplied if desired. We recommend a minimum compressor size of 12L. The filling machine comes with a 1000ml cylinder, allowing a maximum of 1000ml to be dispensed per cycle. By running multiple cycles, larger volumes can also be filled. For example, to fill 2500ml, you can run two cycles of 1250ml each. The smallest fill per stroke is 100ml, and any volume between 100ml and 1000ml can be achieved in a single cycle. We also offer models equipped with cylinders that can fill up to 5000ml per stroke. Lasdpfxsrivxco Aanek Equipped with a suction hose, enabling the machine to draw product directly from a drum or IBC. The machine includes both a foot pedal and an automatic mode. In automatic mode, continuous filling is possible, making it easy and efficient to process larger quantities. The foot pedal allows batch filling at your own pace. Depending on the operator and the fill volume, the machine is capable of filling between 15-25 units per minute, making it very fast and efficient. The machine weighs approximately 15/20kg and can easily be placed on a table. Constructed entirely from stainless steel, this is a very high-quality machine. For any questions, please email us. We are happy to assist you with this or other machines. We also supply a labelling machine that makes an excellent combination with the filling machine. We strive to respond to your inquiries within 24 hours. Of course, you can also reach us by phone. We are available on working days from 09:00 to 17:00.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls Laodpfx Aaswc Ri Ijnok 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: refurbished (used), 3-axis machining center Machine fully overhauled in our workshop, 1-year warranty on mechanical parts Machining travel in X: 4,500 mm, Y: 800 mm, Z: 400 mm (excluding drill bit) 5-position automatic tool changer Included - Vacuum pump - 4 suction cups Ø180mm h 40 mm - 4 suction cups Ø120mm h 40 mm - 2 pneumatic pole clamps with 160 mm opening Excluded - 3 x 6² + N + ground power cable - Mains cable between office and machine (not compulsory) - Suction hose - 160mm - Compressed air - 6-7 bars - Unloading and installation by local forklift truck Options 4th fixed axis 4 positions € 4,594 Removable positioning system for layout (point 0) € 466 Retractable positioning system for layout (point 0) €2,257 Ljdpfx Aaor D Nywsnjak Staircase software (drawing and machining) € 12,400 Laser 2-D Red 15.650 € Transport : Depending on distance

Condition: new, fuel type: electric, color: white, Year of construction: 2021, Year of manufacture: 2021 Lodpfsuu A Tysx Aaneak Model year: 2021 Usable material: Concrete CE marking: yes Damages: none Price: On request

Condition: excellent (used), Very good condition, precision holder from the renowned brand WNT, made in Germany. Equipped with Centro-P HPC16 bush, ensuring high runout accuracy and stable tool clamping. A solid carbide VHM end mill for precision machining is mounted on the holder. Total length A=100, SK40 mounting type (DIN 69871 AD). Premium-class equipment, ready for work on CNC machining centres. Laodpfx Aajw Rrzmsnsk

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. Laodpowbp Erefx Aansk FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Laedex Nhprjpfx Aanjk Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16100 € Laodpfx Aaewiql Aenok 309.12 € 100 to fix 300 mm 680 mm 1020 mm 8 mm/s 5 mm/s 10 mm/s 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2350 mm 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Lasdpjx Nhnbjfx Aansk Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable Lodsx Ng Rbopfx Aanoak It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request