Used Power Plant for sale (41,718)

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Pgedpfx Aoy Suyvslwet . 03487

Condition: new, functionality: fully functional, overall weight: 163 kg, fuel type: diesel, tank capacity: 16 l, color: white, output current: 11 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 6 kW (8.16 HP), nominal power (apparent): 7 kVA, total length: 900 mm, total width: 560 mm, total height: 800 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, number of cylinders: 1, cubic capacity: 498 cm³, fuel tank capacity: 16 l, insulation material: F, protection type (IP code): IP23, Diesel generator set GB8500VTS, brand new, available immediately from stock, minor paint damage possible. 84419 Schwindegg. SWITCHABLE BETWEEN 230 V (32 A) AND 400 V (16 A) The unit can be switched between single-phase operation with 230 V and three-phase operation with 400 V via the control panel. The VTS phase switching system enables the use of a single generator in both single-phase mode (230 V) and three-phase mode (400 V) with virtually no power loss. The key point: In a purely three-phase 6 kW generator, only approximately 2 kW is available per phase. This is often insufficient for a circulation pump, a deep well pump or a cooling system. With the GB8500VTS, the full power is available on one phase in single-phase operation, and the 32 A socket is designed accordingly. CONTROL PANEL Podpfx Aezwwzwjlwogt Digital display HJ-502 for voltage, current, power, frequency and operating hours. Key switch, emergency stop, preheating button, rotary switch 400 V / 0 / 230 V. Connection for an automatic mains failure (AMF) module is available. GENERATOR AND ENGINE Self-excited synchronous generator with AVR voltage regulation, insulation class F, protection class IP23, designation according to ISO 8528-1. Single-cylinder diesel engine, air-cooled, four-stroke, direct injection, electric start, preheating device and decompression switch for safe cold start in winter. Diesel without bio-components, oil capacity 1.65 l, tank 16 l with fuel level indicator. DESIGN Soundproof canopy, 68 to 72 dB(A) at 7 m distance. Transport kit with 4 wheels and 2 handles. Dimensions 90 x 56 x 80 cm, weight 163 kg. DC output 12 V / 8.3 A. DELIVERY SCOPE Generator with built-in start battery, matching mating connectors for the 400 V and 230 V outputs, tool kit and user manual in German. No assembly required. Oil and fuel are not included. Warranty 12 months according to our general terms and conditions. OTHER MODELS FROM THE SAME WAREHOUSE GB8500: 7.5 kVA / 6.0 kW, air-cooled, purely three-phase 400 V, 11 A, single-cylinder, 16 l tank - same engine, the most affordable model in the series. GB85001Ph: 7.5 kVA / 6.0 kW, air-cooled, purely single-phase 230 V, 32 A, single-cylinder, 16 l tank. GB11000VTS: 9 kVA / 7.5 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, single-cylinder, 30 l tank. GB13000: 12.5 kVA / 10 kW, air-cooled, purely three-phase 230 V, 16 A, two-cylinder, 25 l tank. GB13000VTS: 7.36 kVA or 12.5 kVA / 10 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, two-cylinder, 25 l tank. GB50: 50 kVA / 40 kW, water-cooled, SmartGen, four-cylinder, 95 l tank. GB80: 100 kVA / 80 kW, water-cooled, SmartGen, four-cylinder, 165 l tank. Data sheets for all models available upon request. QUANTITIES AND BULK PRICES Larger quantities immediately available from stock. The price applies to single purchases. Container and complete deliveries possible. DELIVERY Pickup in 84419 Schwindegg by appointment. Shipping as individual items or by freight forwarder, freight costs to destination on request. Export to third countries possible. SELLER Geisberger Gesellschaft für Energieoptimierung mbH, Hassenham 4, 84419 Schwindegg. VAT ID DE 204232112 As a family-owned company, we have been building combined heat and power plants and emergency power systems since 1999 and answer technical questions ourselves from our location in Schwindegg, Upper Bavaria.

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Pjdpfxjygf R Te Alwogt Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). Psdsyffqqspfx Alwsgt In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach PVB150 Mobile Cold Asphalt & Emulsion Mixing Plant Turkey’s First Fully Mobile Dual-Mode Plant! Polygonmach PVB150 is a cutting-edge mobile solution specially designed for cold asphalt production, emulsion-based mixes, and road maintenance materials. This powerful system supports Volumetric and Batch operation modes — all in one compact and mobile unit. Whether you’re building rural roads, patching highways, or producing environmentally friendly mixes, the PVB150 delivers performance, flexibility, and cost savings directly to your jobsite. ⸻ Pedpfx Aleykad Aswjgt ✅ Specialized for Cold Mix & Emulsion Applications • Cold Asphalt Mixing Mode: Up to 200 m³/hour on-demand production, perfect for binderless and emulsion-stabilized mixes • Emulsion Mixing Mode: Precise control for polymer-modified bitumen and emulsified asphalt blends • Low-Temperature Operation: Energy-efficient and ideal for off-grid, rural, or urban environments • Recycling-Ready: Supports RAP (recycled asphalt pavement) and eco-friendly binder integration ⸻ ? Advanced Design – Built for Road Projects • 3x8 m³ aggregate hoppers, 5-ton cement/emulsion silo, and integrated water/additive tanks • High-precision weighing & dosing for binder, aggregate, and water • Fully automatic or manual operation via smart control panel • Mobile frame with self-lifting chassis – set up in 10 minutes • On-site production = zero material waste, no transportation delays ⸻ ?️ Multiple Functions – One Mobile Solution In addition to Cold Asphalt and Emulsion, PVB150 can also operate as: • Mechanical Stabilization Plant • Soil Compound Mixing Plant • Standard Concrete Plant (Volumetric + Batch Modes) ⸻ ? Mobile | Sustainable | High-Performance | Made in Turkey Say goodbye to fixed-site plants and expensive transport. With Polygonmach PVB150, your site becomes your plant. ⸻ ? Contact us today and take control of your road projects! ? ? ?

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg Pjdpsztpp Eefx Alwjgt

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Pgjdpjztp D Aofx Alwot Feed conveyor Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: new, Technical specifications: Number of rollers: 4 Roller size: 120 x 60 mm Number of speeds: 4 Feed speed: 4-8-11-22 m/min Max. stroke: 20 mm Distance between rollers: 133-143-145 mm Distance between the first and last roller: 421 mm Psdpfxjzvm Rre Alwogt Motor power: 0.75 kW Motor speed: 1400/2800 rpm.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG23000SE-3D, overall weight: 370 kg, fuel type: diesel, tank capacity: 30 l, color: beige, power: 16 kW (21.75 HP), output current: 50 A, output voltage: 230 V, nominal power: 15 kW (20.39 HP), continuous power: 15 kW (20.39 HP), total length: 1,320 mm, total width: 810 mm, total height: 820 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG23000SE-3D generator offers you a continuous output of 15 kW with its reliable 4-stroke diesel engine. With its 30-liter tank, you can operate the DG23000SE-3D generator for up to 8–10 hours. You can start the generator using the electric start or the recoil starter. The starter battery is charged during operation, allowing for easy starting the next time it is used. Technical data: Maximum power: 16 kW Rated power: 15 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Psdpfxozvn Sqs Alwsgt Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil starter Noise level (7m): 86 dB Tank capacity: 30 L Dimensions: 1320 × 810 × 820 mm Weight: 370 kg

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Podpfx Aloztwz Newegt Base construction: on stainless steel frame with feet Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: used, Year of construction: 2019, Fruit reception: Water bath, fruit conveyor with water shower, chopper Packing press type H65: Capacity: 1,200 kg/h Yield up to 75% 24 press inserts (65 x 65 cm) 22 press cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Additional title: Fruit reception with water bath, fruit conveyor, chopper and packing press Pgjdpszty Ixefx Alwot Capacity: 1200 kg/h Features: Water bath, fruit conveyor with water shower, chopper, packing press with 24 press inserts and 22 press cloths

Condition: ready for operation (used), * Hazemag: stationary crushing plant * Brand: Hazemag Pgsdpjzt Algsfx Alwjt * consisting of: Hazemag crusher * Type: APP 1010 F * Feed opening: 1100 x 1000 mm * Drive: 75 kW electric motor. * Vibrating chute: below the crusher * with dimension: 1500 x 1000 mm * and drive: 2 vibrating motors. * Vibrating chute: under the hopper * with dimension: 3500 x 1000 mm * and drive: 2 vibrating motors. * Incl.: steel construction and electrical control panel. * Discharge conveyor: length 5000, belt width 1000 mm.

Condition: good (used), Year of construction: 2002, operating hours: 160 h, functionality: unexamined, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 1,100 mm, total length: 3,900 mm, total height: 2,150 mm, fuel: diesel, overall weight: 3,220 kg, continuous power (apparent): 250 kVA, continuous power: 225 kW (305.91 HP), rotational speed (max.): 1,500 rpm, input current: 360 A, input frequency: 50 Hz, Equipment: documentation/manual, Brand: Perkins Model: G220S Year of manufacture: 2002 Serial number: 124588 Operating hours (recorded): 160 Pedpfjzvaphox Alwjgt Capacity (kVA): 250 Capacity (kW): 225 Engine brand: Perkins Engine model: 2006TAG2 Fuel: Diesel Alternator brand: Leroy Somer Alternator model: LL 6014 B Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 360 Dimensions L x W x H (mm): 3900 x 1100 x 2150 (excluding panel) Weight (kg) approx.: 3220 Quantity in stock: 1 Manufactured in: United Kingdom Comments: Ex emergency generator set, in excellent optical condition, with heat exchanger cooling system.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 Psdpfjzvwirex Alwogt • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Pgsdpfxjzv S Tls Alwet Dismantling, loading, and transport can be discussed separately.

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. The system is currently in operation. Pgjdpfxozvc A Ro Alwet Due to a relocation of operations, it can be dismantled in February 2027. Location: Neusäß, near Augsburg. Condition and dimensions can be seen in the pictures.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Pgodpfxjzr T Dko Alwjt Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: used, Technical data: - Pressure: 100 bar - Capacity: 2 L - Motor: 0.75 kW Pgedpfszrxunjx Alwjt

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Pgsdpezrgfhjfx Alwjt Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Fork length: 1,800 mm Fork width: 150 mm Pgsdpjzrgh Aofx Alwjt Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Dimensions and weight Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Year of construction: 2017, condition: used, Biological lactic acid plant for the production of lactic acid to adjust the pH of beer wort. In two fermentation tanks, each with a capacity of 40 hl, the wort is fermented by lactobacilli to produce lactic acid at 45–50 °C. Each tank is fitted with a sampling tap, two heating elements, a safety valve and a vacuum valve. Additional components: - 2 plate heat exchangers - 2 inductive flow meters - 2 centrifugal pumps - Pipework Additional title: Two-tank system for supplying lactic acid to the brewhouse Tank volume each: 4000 l Operation / Control: visualized in ProLeit Material: Tanks made of 1.4571 and 1.4404 stainless steel (AISI 316Ti and 316L) Position: tanks standing on 3 feet each Base construction: cylindrical tanks with dished bottoms Pgsdpszizdajfx Alwst Features: Each tank is fitted with: cladding, safety valve, vacuum valve, 2 x heating elements, sampling tap, outlet pipe with manual valve; Miscellaneous: 2 x centrifugal pumps, 2 x heat exchangers, 2 x flow meters; pipework

Condition: used, CIP system comprising three 20 hl stainless steel tanks for acid, lye and caustic soda. The two lye tanks are thermally insulated. Additional title: 3-tank system for cleaning the brewhouse Vessel volume each: 2000 l Length: 5,8 m Material: vessels from stainless steel Position: vessels standing on 3 feet each Features: 3 CIP tanks (2 of which are insulated); feed pump; chemical dosing system; 2 filter cartridges in the pipeline; conductivity measurement; pneumatic valves; control cabinet; pipework Podpfjzizfdjx Alwjgt

Condition: used, Year of construction: 2003, A system for blending beer with degassed water and subsequent carbonation. Additional title: Carboblender for precise mixing and carbonation Capacity: 20000 l/h Material: contact surfaces from stainless steel Position: mounted on stainless steel frame Pgedpfxezizthj Alwot Features: various pipes, valves and sensors; control cabinet with touch panel

Condition: used, Used Siemens SIMODRIVE 611 power module with control unit for CNC and servo applications. Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module / control unit Power module model: 6SN1123-1AA00-0CA1 Control model: 6SN1118-1NH00-0AA2 System: SIMODRIVE 611 Application area: Machine tools Mounting type: Control cabinet Cooling: Air cooling Pgodpfxszi Dyds Alwot Condition: Used

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, overall weight: 4,200 kg, total height: 2,273 mm, spindle motor power: 24,000 W, spindle speed (max.): 7,000 rpm, number of axes: 5, This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm. Machine Benefits Qualitative Machine Benefits • Machine in very good, working condition, ready for test. Full documentation available. Technical Machine Benefits • Fire suppression system Pgedpozlqqbefx Alwot • Top oil mist filter • Max. Grinding wheel diameter: 200 mm Dimensions Machine Depth 2930 mm