Used Premelter for sale (61)

Condition: used, 2 units available. For further information, please refer to the attached photos. Dwsdpfx Ajd Tmaboddof

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/003306, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, workpiece width (max.): 3,200 mm, TECHNICAL DETAILS Dwsdexx N D Hopfx Addef Mobile shoulder opening: 3,200 mm Maximum panel width: 3,200 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Edge thickness (coil), minimum PVC-ABS: 0.3 mm Edge thickness (coil), maximum PVC-ABS: 3 mm Feed speed: 10 - 40 m/min Distance between retractable pins: 500 mm EQUIPMENT Motorized pressure rubber belt Support track with retractable pins CNI control unit in a separate control cabinet Rectifier unit with two motors (one for each side) Glue application unit with EVA glue premelter Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapping trimming group Staggered finishing unit with two motors Corner rounding unit with 4 motors Milling unit tiltable 0-90° Edge scraping unit Brushing group

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive Dwodpfxjw Nadto Addjf - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Year: 1999 Dsdpsx Eblpefx Addjwf Description: - Offline production - Cold glue - Hotmelt - Premelter: Robatech - End sheet tipping - Pressing station - Delivery

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The system consists of the following components: Perfect Binder KM 410.C – 24 clamps Gathering Machine ZU 840.B 2 cutting stations Robatech premelters XRT 951 and 950 / ICS 160 Dwsdpfx Adjxvyhdjdof Transport and cooling belt AK-6365-02 Three-knife trimmer HD 151.P Müller Martini stacker Note: 6 trucks are required for transport.

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Dsdpsxykdqjfx Addewf Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Year of construction: 2021, condition: used, Year: machine 2021 Condition: Excellent (aș new) Perfectbinder KM41 SC/HC Configuration: - non/Stop production - book block feeder - jogging station with adjustable intensity - milling and notching station with separate drives and speed adjustable - integrated endsheet feeder - endsheet side gluing with Robatech hotmelt nozzles - endsheet position adjustable to the book spine - spinegluing with Hotmelt roller glue unit and Robatech hotmelt premelter - spinegluing with Coldglue unit with pump and level control - backlining station - nipping and pressing station - pile cover feeder with 4 scorring rails - cover and lining side gluing with RobatechHotmelt nozzles - delivery with lay down unit Binding options: HOTMELT adhesive or white dispersion adhesive Specificacion: Dsdpfx Asitycqjddewf - paper size max. 390mm x 300mm x 60mm, min. 140mm x 100mm x 3mm - speed: up to 40 cycles / minute - dimension: Length 6400 mm Width 2150 mm Height 1600 mm - weight: 3100 Kg - power consumption:9 KW 230/400V 3N, PE, 50 Hz - compressed air:1800 NL/h - 6 bar

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Dwsdpjxx Nnxefx Addof Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Dwsdpevnwf Uofx Addjf Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini Three knife trimmer Kolbus HD 150.B Year: 2005 Description: Dodpfx Adjx Dkklodowf - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring Dsdpov T I R Sofx Addowf • Compressor Available immediately

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AH/119433, Touch screen control monitor Premilling heads Spray system in front EVA hotmelt glue station (2pcs.) Premelting unit Infrared ceramic lamp Endcutting unit Trimming unit Corner rounding unit Round 4/A - pneumatically changed for two corners (1mm and 2mm) Edge (corner) scraping unit SCR/S (pneumatically changed between two radius scraping - 1mm and 2mm) Glue (flat scraping) unit Oscilating brushing unit Dwedpfx Aov R Hagsddsf Hot air for edge finish Panel thicness 10 ÷ 60 mm Edge thickness 0,4 ÷ 15 mm Feed speed 10-22 m/min It has no servo drives, but due to pneumatic changes of corner units and scraper - it can be adjusted to work with 3 edge dimensions - rough trimming for 0.4mm, and with the corner units (4pcs.) 1mm and 2mm edge.

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Dsdpsrnkw Dofx Addjwf Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Dwjdpjxx Nf Dofx Addef Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader Dsdpowd Tcaofx Addjwf - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: used, Year of construction: 2011, Perfect binding line Dwsdsx Ahl Djpfx Addsf Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side Dwodjv N Ep Dopfx Addef - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station Dedpjxuad Ajfx Addswf - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2005, Perfect binding line Kolbus ZU 841.A - KM 473 Year: 2005 Consisting of Gathering machine Kolbus ZU 841.A Dwjdpjxd Dm Hefx Addof Year: 2005 Description: - Colour monitor with touch screen - Number of gathering stations: 20 (15 x incl Signalynx bar code reader),( 4 x Optoelectronic signature recognation) - Air center: Variair - Set up element - Transfer into the binder Perfect binder Kolbus KM 473 Year: 2005 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson Durapail - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder: SAL 411.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down delivery Transport system Kolbus Description: - Escape delivery Conveyor tower: 2x Max. mechanical speed: 8.000 cycles/h Maximum size range: 383 x 320 x 70 mm Maximum size range: 460 x 190 x 70 mm Minimum size range: 105 x 100 x 3 mm

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Dwsdou Utzyopfx Addof Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable Dsdpfx Aek H Sfhjddswf - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Dedpfx Adoxdx Tnodowf Müller Martini Corona C15 S/35 (18") Year: 2009 Description: - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Dedpjt Rmhaefx Addswf Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: Dsdpfjv N U U Nox Addowf - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Year of construction: 2019, condition: used, Case maker KOLBUS DA 270 Bookjet Edition Year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Description: Djdpfx Ader Aba Sodjwf - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation proces - Counter stacker delivery with following roller conveyor - Cloth cylinder with grippers and exchangeable plates for rubber pa (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - Centre strip pressing device (head / tail) - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D additional equipment - Without centre strip roll device - Board centre strip cutting device (cross centre strip) For processing digital print products of varying centre-strip. - Device for cutting rigid centre board strips to width, with possible width variation from cycle to h data coupling via AFS 702.W with input and output code reader for digital print finishing - Processing of Hotmelt with premelter LH 375.B Technical specifications: Open cover size: Max. 670 x 390 mm Min. 205 x 140 mm Joint width: 4 - 15 mm Spine width: 14 - 120 mm Turn in width closed: 8 - 15 mm Cloth: Width: 223 - 708 mm Height: 130 - 428 mm Boards: Thickness: 1 - 4 mm Width: 95 - 328 mm Height: 140 - 390 mm Board centre strip: Thickness: 1 - 4 mm Width: 6 - 90 mm Mechanical speed: up to 65 cycles/min