Used Preset for sale (301)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 318-082691, 150 l/min Water Throughput 1000 l Settlement Tank Nodpfx Asx Trrlsdwecl System for cleaning wastewater from CNC machines. The wastewater is conveyed from the CNC machines via lift pumps into the WRA-1000. Before entering the treatment unit, a flocculant is continuously and automatically dosed and thoroughly mixed with the wastewater using an integrated mixer. The integrated lamella pack in the WRA-1000 allows for short reaction times during the settling of the flocculated contaminants. The sludge settles in the cone of the WRA-1000 and is automatically discharged at preset intervals into the sludge big-bag located beneath. Excess water is returned to the system via an integrated lift pump, which minimizes water loss. The water purified by the WRA-1000 then flows into the collection tank of the CNC system. From this tank, the CNC machines can use their pumps and piping systems to reuse the treated process water for further machining operations.

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! Nedpsfk Ew Ejfx Adwecl o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, Year of construction: 2025, functionality: fully functional, saw band length: 6,880 mm, total height: 41 mm, Fully automatic horizontal mitre saw for cuts from +60° to -60°, equipped with Siemens control system and 2000 mm material feeder - Dual-column guided horizontal bandsaw for cutting solid bars and bar profiles - Siemens S7-1500 control with extensive functionality, operated via a 7'' touchscreen display - Standard with 2000 mm material feeder -> frequency-controlled feed via ball screw and servomotor Ncodox Uk Arjpfx Adwjl - Material database with preset sawing parameters and characteristic curves - Sawing movement via ball screw and servomotor - With ARP (automatic cutting feed regulation) -> automatic saw blade feed based on material resistance. The feed rate is continuously adjusted to the current cutting load. ARP enables shorter processing times and longer saw blade service life. - Automatic positioning after entering the desired angle - Hydraulic clamping of the turntable allows for precise angle cuts - Robust machine frame and minimal distances between the saw blade, machine guideways, and workpiece minimize vibrations for optimal cutting performance - Infinitely variable cutting speed from 15 to 150 m/min - Saw drive via bevel gearbox, asynchronous motor, and frequency inverter - For straight cuts, clamping of the material before and after the cut via split vise - Adjustment of hydraulic vise pressure via a control valve with pressure gauge - 7° saw blade inclination and hydraulic band tension increase blade service life - Front blade guide automatically moves parallel to the movable vise jaw - Swarf removal brush driven by blade wheel - Emulsion cooling with fluid distribution to the blade guides and directly into the cutting channel - LEUZE safety light barrier in front of the machine and material feeder - More powerful motor available as an option - Blade guides with integrated cooling system

Condition: used, Year of construction: 2018, operating hours: 3,450 h, Equipment: all wheel drive, New Arrival Ncjdpfx Asyamgijdwel Liebherr L 538 Z 2plus1 Z-Lifting Frame Serviced by Liebherr at 499 operating hours on 06.09.2019 * All further services also carried out by Liebherr according to service schedule * Up to 3511 hours as of 17.03.2025 Original paintwork Chassis No.: VATZ1559PZB052421 Year of manufacture: 2018 Operating hours: approx. 3540 Lifting frame with Z-kinematics – earthmoving version 4-cylinder inline engine, 111 kW / 151 HP, water-cooled with turbocharger, Emission Stage 4 Machine width: 2500 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride control BSS – lifting frame damping * Central lubrication system, factory-installed by Liebherr * Automatic climate control (maintains preset temperature automatically) * Access aid in front of windshield for easier cleaning of the front window * Air filter with pre-separator “TopSpin” for pre-cleaning intake air * Premium touchscreen display * Comfort safety door, opening to 180 degrees * "Comfort" driver's seat with pneumatic suspension and seat heating * Adjustable steering column * Comfort radio with hands-free function * Steel lamp carrier for front headlights instead of plastic * 4 LED work lights on the rear of the cab roof * 4 LED work lights on the front of the cab roof * Tyres: 20.5 x 25 L3 front axle: 2 x 50% * Tyres: 20.5 x 25 L3 rear axle: 2 x 50% Automatic self-locking differentials, 45% locking value on both axles Optional equipment available at extra cost: - 4-in-1 bucket (grapple & levelling bucket) 2 m³ €3,950 - High-volume bucket 5 m³ €3,990 - Bucket with clamp from 2.0 m³ up to 3.5 m³ €3,660 - High-tip bucket from 2.5 to 5.5 m³ from €5,990 - Pallet fork 5 tons from €2,190 Weighing system * Pfreundt WK 60 for this machine €3,990 * 24 V printer for weighing system €1,260 All prices net plus VAT or for export Sale only to businesses or for export. Sold as-is as per current condition. No warranty or guarantee. The stated mileage and operating hours are based on odometer/hour meter readings; accuracy and completeness cannot be guaranteed! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent guaranteed characteristics. The descriptions and information serve only for general identification of the machine and do not represent warranty in the legal sense. The information is not guaranteed to be complete. All details/descriptions and images are non-binding and do not constitute guaranteed properties. Only the details in the order confirmation and invoice are binding. The seller offers no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be verified separately if necessary. We are happy to take your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our international customers, we provide all customs and export documentation for trouble-free export.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. The extruded material is formed into a parison, which is then molded into the final product. Njdpfx Adex R R Igewscl

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) Ncodovw Ackjpfx Adwsl The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, machine/vehicle number: LP20250324YKH, laser hours: 150 h, laser type: fiber laser, laser source manufacturer: Dato, laser source model: Cw 1500/Pulse 300w 15mJ, For sale is a state-of-the-art, barely used 2-in-1 laser system, ideal for precision cleaning and welding. This complete package is ready for immediate use. Price: €29,999 (negotiable) NET Nsdpfx Aexz R I Ejdwscl IMPORTANT NOTE: This is a private sale; no VAT can be shown on the invoice. 1. Key Data of the Laser Units: • Brand/Manufacturer: Shandong Dato Machinery Co., Ltd • Year of Purchase: 2025 (as-new models!) • Operating Hours: Extremely low usage! • Pulse Laser (LC-300W): approx. 300 hours • CW Laser (LC-1500W): approx. 150 hours 2. Laser Specifications: • Pulse Laser (cleaning/ablation): 300 W power, 15 mJ pulse energy. Includes protective lenses and special distance tripod for the handpiece. • CW Laser (welding/high-speed cleaning): 1500 W power. Includes protective lenses. 3. Unbeatable Added Value (Software & Parameters): • Comes with over 40 preset, optimized parameters for instant and efficient cleaning of a wide range of materials, saving you significant setup and trial time. • The results and function of these parameters can be seen in our videos on TikTok, Facebook, and Instagram: Infinity Laser Clean. 4. Complete Accessory and Safety Package: • Peripherals: Industrial Fume Extractor XL-500 (700 m³/h capacity) and Vevor 50L Oil-Free Compressor. • Safety: 4x laser safety curtains (class 4), 8x safety glasses (LaserPair), 1x 3M respirator mask. • Consumables: Includes 40 replacement filters, numerous spare protective lenses. • Logistics: Sturdy loading ramps included. 5. Certificates, Warranty & Support: • Warranty: Manufacturer warranty valid until 2027. • Documentation: All CE certificates and technical documentation included. • Support: Buyer will be added to an existing WhatsApp/Telegram support group for technical assistance and parameter optimization. Reason for Sale: Company closure and strategic refocus on the construction industry. Condition: AS NEW, regularly maintained, and ready for immediate use. Location & Viewing: Frankfurt am Main. Viewing and test run available by appointment for serious buyers. Delivery available at extra cost after full payment received. Serious inquiries only, please.

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Njdpfjwzvzmox Adwocl

Condition: like new (used), Year of construction: 2012, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 550429, Size 72 x 102 cm, Wallscreen, Press Center, Instant Gate, Color assistant, Alcolor dampening, Autoplate, Autoregister, Preset Plus Feeder, Preset Plus Delivery, Technotrans Combistar Beta 140 L air-cooled, Heidelberg Washstar for blanket and impression cylinder and roller cleaning with cloth, Powderspray Weko AP 500, UV interdeck dryer after unit 4, one interdeck dryer, Cleanstar Compact powder extraction, Max speed 16,500 s/h, Autoregister, Antistatic in feeder and delivery, Airstar Pro water-cooled, Combistar. Nedpex An Sdefx Adwjcl

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer Ncjdpfxowgbcye Adwjl The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Ncodpst D Azcefx Adwel Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Nedpfet Dpw Rsx Adwjcl Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, stack height: 60 mm, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², production capacity: 5,000 unit/h, Duplo Booklet Production System 5000 The offer includes: 1x Collating Tower DC-10/60 Transfer Unit LUL-HM Staple and Folding Unit DBM-500 Front Trimmer DBM-500T Preset Counter DBM-K Long Delivery Stacker DBM-400LS DC-10/60 (10 Stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeders: Suction/blast air Controls: Double sheet, misfeed, paper jam, empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stitching Unit DBM 500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 cycles/h (A5) 4,600 cycles/h (A4) 4,000 cycles/h (A3) Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stitch heads: 2 Controls: Paper jam, paper position indicator, wire end Memory: 12 jobs Folding and stapling styles: folding without stapling; saddle stitching with folding; corner stapling with folding; corner stapling; block/side stapling Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Front Trimmer DBM 500T Njdpex Nimrjfx Adwocl Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Speed: >5,000 cycles/h Processing capacity: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Main features: Max. swing over bed: 460 mm Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Ncodpfjx Nqlisx Adwjl Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 134, 1 x Langhi Sistemi Srls single-head linear weigher. This weigher can be mounted on stand or operate as a table-top unit and is perfect for weighing small granular products such as coffee, pasta, rice, beans, or lentils. Technical specification: Model – LS RCT1. Serial number – 134. Date of manufacture - 2023. Weighing range - 50g-3000g. Speed - up to 20 drops/minute, depending on weight and product. Hopper capacity - 4.5 litres. Nsdpfx Adowrnacswecl Controls - PLC control with 7'' touch screen. Electric supply - 230 V / 50-60 hz / 1 phase. Features: This linear weigher can store up to 10 preset programs for different products. Condition: Excellent, the weigher has had very little use.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0509, input voltage: 230 V, For sale is an analogue presetting device Zoller Bravo 2. The item is in good condition. Presetting device Zoller Bravo 2 Serial number 0509 Year of manufacture 1999 Voltage 230 V∼ L/N/PE Ncodsxwlpcjpfx Adwel Frequency 50/60 Hz Tolerance (voltage) −10% to +6% Pneumatics (compressed air) 4−6 bar Power

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • Steep taper tool holder (40° taper not included when ordering 155 HSK tools) • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path Nodpfx Asx Nkp Ujdwjcl • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Ncodpfxotctmfo Adwol Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/1,5 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 1,5mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 24 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 500kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Njdpfx Ajtctmbjdwscl Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, working width: 31,400 mm, bending angle (max.): 155 °, overall weight: 700 kg, total length: 36,000 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, bending cheek thickness: 30 mm, clear span: 80 mm, working height: 900 mm, Equipment: documentation/manual, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR3000/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 3140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 155° -Bending beam: 28 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 700kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Ncodpfxsuayamo Adwel Shipping within Germany 360 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/0,8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 0,8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 23 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 350kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup Njdpfx Aemxgwtodwjcl

Condition: new, Year of construction: 2025, Free delivery up to 150km. Bending machine ZGR3000/1.0mm from Prod-Masz available to try out and take away. You will receive professional instruction on site. Technical data: -Working width 3140mm -Sheet thickness up to 1mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 20 mm -Passage: 80 mm -Gas pressure springs -Degree scale -Stop for preset bending angles -Sheet storage -Weight approx. 550kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessory roller shears (up to 0.8mm) 350EUR All prices are subject to 19% VAT. CE certificate Nedpfx Ajrnnkbjdwscl Guarantee: 12 months. Pick up yourself Shipping within Germany 360EUR

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Nodpfx Adolxqk Hewjcl Folding bench ZGR2000/0,8L from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 160° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/1,2 from the company Prod - Masz to try on site and to take away. Njdjrt Hu Dopfx Adwocl You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 25 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 400kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° Nodepa Um Iopfx Adwecl -Forward: 80 mm Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand