Used Press Brake for sale (29,540)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1962, machine/vehicle number: E 557, stroke length: 125 mm, overall weight: 3,900 kg, pressing force: 40 t, table length: 1,000 mm, table width: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Bodpez Izdnofx Agksdi Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Bdodpszh Icysfx Agksi Year of manufacture: 2005

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 – IN STOCK Bodpfxoyr N E Ee Agksdi 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) • Light curtain protection at the front • Full-size rear door with power-off when opened • Large protective guards on both sides • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) • Year of manufacture: 2026, new machine TERMS Available immediately from stock in our warehouse in Sokołów Podlaski. Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: excellent (used), Year of construction: 2008, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, number of axes: 7, type of crowning: CNC-controlled, overall weight: 10,800 kg, pressing force: 150 t, working length: 3,100 mm, working range: 3,100 mm, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, For sale: 1 used High quality / very good condition German made Bystronic Pr150 3metre x 150ton cnc pressbrake With goose neck upper tooling that is 2 years old Bystronic Beyeler PR 150×3100 Make: Bystronic Model: PR 150 Pressure Reference Year / new: 2008 Total axis: 7 – 5axis back gauge X R Z1 Z2 X1 Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 1500ton Cnc control: Cybelec Modeva 10s Fully serviced with Bystronic uk – as attached per photo General Information: Model: PR 150 x 3100 Manufactured: 2008 Bedpfxoh Eyxkj Agkedi Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weight kg 10800 Electrical values: Power of main motor kW 11 Total Connected Load kW 15 Operating voltage V AC 3ph 400 Frequency Hz 50 Control Voltage v DC 24 Nominal Current Fuse A 35 Pneumatic: Max operating pressure bar 8 Hydraulic: Max accumulator pressure bar 300 Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with training with your operators available

Condition: excellent (used), Year of construction: 1999, stroke length: 3,060 mm, throat depth: 410 mm, operating speed: 11 mm/s, reverse speed: 135 mm/s, overall weight: 18,209 kg, total length: 2,310 mm, total width: 3,660 mm, total height: 3,095 mm, power: 30 kW (40.79 HP), pressing force: 230 t, clearance between the columns: 2,690 mm, table width: 200 mm, CNC Crowning Hydraulic MODUFIX Tool clamping Hydraulic lower tool clamping CNC Finger Backgauge Z1 and Z2 6 Axis backgauge X1/X2, R1/R2 and Z1/Z2 Network card BNC-with RJ-45 Connector ToPs 600 Software Set Tooling  Max. bending length: 3060mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 535mm Beam stroke: 365mm Table Width: 200mm Troth beam: 410mm Approch speed: 200mm/min. Working speed: 11mm/min. Return speed: 135mm/min. Adjustment X-Axis back gauge:1000mm Bodpo Aa It Tefx Agkodi Number of controlled axis: 9 Crowning: yes Hydraulic toolclamping: yes Power: 30kW Length: 2310mm Width: 3660mm Height: 3095mm Weight: 18209kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, stroke length: 215 mm, overall weight: 7,300 kg, pressing force: 86 t, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Bdsdpfxsz Hvgze Agkji Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 Bdjdpjz Rmp Njfx Agkoi CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), pressing force: 150 t, table width: 3,100 mm, For sale: 1 used High quality / very good condition Bystronic Xpert 3metre x 150ton cnc pressbrake with powered lifting aid Bodettl D Nspfx Agkodi Bystronic Beyeler Xpert 150×3100 Make: Bystronic Model: Xpert150 Year / new: 2010 Total axis: 9 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 - and Powered Front Lifting Aid Hydraulic tool clamping Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 150ton Fully serviced with Bystronic Uk General Information: Model: XPERT150x3100 Manufactured: 2010 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 200 l, overall weight: 7,500 kg, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, pressing force: 110 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH! DELIVERY AVAILABLE THROUGHOUT EUROPE – WE CAN ARRANGE TRANSPORT DIRECTLY TO YOUR DESTINATION AT AN ADDITIONAL COST. CNC PRESS BRAKE SPB 110T × 3200 – HACO 70S – 4+1 AXES The SPB 110T × 3200 is a professional electro-hydraulic CNC press brake with a bending force of 110 tons and a working length of 3200 mm. Designed for precise sheet-metal bending in both individual and series production. The electro-hydraulic servo synchronization system and linear scales monitoring the ram position provide high accuracy, stability and repeatability. The machine is equipped with high-quality hydraulic, electrical and drive components from recognized manufacturers. HACO 70S CNC CONTROL – 4+1 AXES • Y1/Y2 – independent control of the left and right sides of the ram • X – precise backgauge positioning • R – vertical adjustment of the backgauge fingers • V – automatic CNC table crowning compensation TECHNICAL DATA • Bending force: 1100 kN / 110 T • Working length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Controlled axes: Y1, Y2, X, R + V (4+1) • CNC controller: HACO 70S • Motor power: 8.5 kW • Fast approach speed: 180 mm/s • Bending speed: 13 mm/s • Return speed: 170 mm/s • Dimensions: 3850 × 1650 × 2680 mm PREMIUM COMPONENTS • CNC control system – HACO 70S • Servo motor and drive – INOVANCE / ESTUN • Main servo motor – INOVANCE / ESTUN • Main hydraulic valve – HACO + Rexroth • Hydraulic pump – Rexroth / HYTEK (USA SUNNY) • Hydraulic cylinders – HONGWEI / WUYANG • Backgauge ball screw – TAIWAN • Linear guides – TAIWAN • Hydraulic fittings – Germany EMB • Cylinder seals – Japan NOK • Linear scales – HACO Bdsdpfsy D Nviex Agksi • Main electrical components – Schneider • Laser safety protection – Italy DSP • Rear safety light curtain – LNTECH • Push-button quick tool clamping system • Foot pedal control ACCURACY • Ram positioning repeatability: ±0.01 mm • Ram positioning accuracy: ±0.02 mm • Backgauge repeatability: ±0.02 mm • Bending straightness: 0.3 mm / 1 m • Bending angle accuracy: ±1–1.5° • Linear scale resolution: 0.005 mm EQUIPMENT • Electro-hydraulic servo synchronization system • CNC automatic table crowning compensation • Backgauge with linear guides and ball screw • Adjustable front material supports • Quick tool clamping system • V8–V12 tooling set The upper tool is segmented into 835 mm sections, with one section additionally divided into shorter segments, providing greater flexibility when bending complex workpieces. The SPB 110T × 3200 combines advanced 4+1-axis CNC control, high positioning accuracy and quality components from recognized manufacturers, providing efficient, precise and repeatable performance for professional sheet-metal fabrication. European delivery can be arranged directly to the customer's destination at an additional cost. Please contact us with your delivery address for an individual transport quotation.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec Bedpsx Ew Dqefx Agkodi - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: good (used), Year of construction: 2007, Machine is in good condition. Bjdsz N Dgvspfx Agkodi

Condition: used, gebraucht 080242 prompt, Zwischenverkauf v Italien Bdjdpfjz Afcmjx Agkoi 1890 € 1 Upper tool 1033/28°/R 0,6/8 mm 4 x 835mm Lower tool 3000/U 8 mm 3 x 835 mm + 1 x 400 mm

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm DISTANCE BETWEEN UPRIGHTS: 2700 mm Bdodomyc I Nspfx Agkoi OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun NC E21, stroke length: 100 mm, throat depth: 180 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table height: 290 mm, overall weight: 1,500 kg, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, input voltage: 400 V, input current: 380 A, pressing force: 40 t, clearance between the columns: 900 mm, ram plate length: 500 mm, retraction force: 40 t, table length: 1,320 mm, type of input current: three-phase, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. Bdodpfszlqkusx Agkoi The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 183 h, control type: CNC control, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, bending force (max.): 290 t, working width: 4,000 mm, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Bedjywfp Sspfx Agkodi

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Bodsz Hbu Rspfx Agkjdi Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: new, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 940 mm, overall weight: 7,750 kg, pressing force: 135 t, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Bdedsxfzpzepfx Agksi Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: new, functionality: fully functional, Year of construction: 2026, stroke length: 120 mm, throat depth: 230 mm, oil tank capacity: 200 l, overall weight: 7,500 kg, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, warranty duration: 12 months, pressing force: 125 t, clearance between the columns: 2,700 mm, distance table to ram: 390 mm, ram plate length: 3,200 mm, table length: 3,200 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, AVAILABLE IN STOCK – READY FOR IMMEDIATE DELIVERY HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control – 125 T – 2 Axes (X, Y) The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace, and other metalworking sectors. CONTROL AND EQUIPMENT • X-axis back gauge with servo drive • Y-axis beam adjustment with servo drive • Manual R-axis back-gauge finger height adjustment • Back-gauge travel: 600 mm Bdodpfx Agoytp N Hjkoi • Two front material supports • AMADA-style quick punch-clamping system • Control panel mounted on a movable arm • LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT • Clearly visible safety markings • Side guards • Rear safety gate • Easily accessible emergency-stop switches • Safety light curtain preventing accidental access between the punch and die The machine is supplied with an operating manual and a CE Declaration of Conformity. TECHNICAL DATA • Maximum sheet thickness: 6 mm • Pressing force: 125 t • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back-gauge travel: 600 mm • Controlled axes: X, Y • Motor power: 7.5 kW • Weight: 7500 kg • Dimensions (L × W × H): 3870 × 1550 × 2400 mm • Front supports: 2 • Controller: MTP-3212 • Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: used, gebraucht 9313B Bdedpsyui U Ssfx Agksi prompt, Zwischenverkauf v 1300 € 1 4080 mm MINT CONDITION with manual crowning with single adjustment

Condition: new, Hemming tool for Amada/promecam Bdedjqxq Hbopfx Agkji

Condition: new, EHT type press brake punch 78 degree H220mm R3mm Bjdpfxevlv Shs Agkjdi Sectionalised lengths

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 9,600 kg, total length: 3,300 mm, total width: 1,650 mm, total height: 2,500 mm, input voltage: 400 V, warranty duration: 12 months, feed force X-axis: 600 N, feed length X-axis: 180 mm, product height (max.): 455 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 160X3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. TECHNICAL SPECIFICATIONS • Pressing force: 160 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 8 mm • Control system: MTP-3212 CNC • Number of CNC axes: 4 (Y1, Y2, X, R) • Distance between side frames: 2600 mm • Throat depth: 320 mm • Ram stroke: 180 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm Bdedpfezcmrdex Agksi • Tool clamping system: AMADA quick clamping • Motor power: 11 kW • Power supply: 400 V / 50 Hz • Dimensions (L × W × H): 3300 × 1650 × 2500 mm • Weight: 9600 kg ADDITIONAL INFORMATION • Professional technical support included • Assistance with tooling selection and bending parameters • CE Declaration of Conformity included • English user manual supplied • Spare parts support during and after the warranty period • Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.

Condition: like new (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 80983, Used hydraulic cnc press brake Brand: HACO Model: ERM 60225 Year: 2000 Serial No.: 80983 Characteristics: Numerical control NEW: Cybelec Cybtouch 8 3 axes (Y1, Y2, X) Force: 225tn Bending length: 6,000mm Distance between uprights: 5050mm Bdjdpfor En Snsx Agkei Neckline: 300mm Opening: 450mm Fast lowering speed: 80mm/s Motor: 18,7KW Weight: 29.500kg Includes 60mm cradle at 6 meters. Standard 88º punch at 6 meters.

Condition: new, functionality: fully functional, Year of construction: 2026, operating speed: 80 mm/s, oil tank capacity: 200 l, overall weight: 7,400 kg, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, input voltage: 400 V, warranty duration: 12 months, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system Bdedpfx Aozg Dk Dsgkoi • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Year of construction: 1994, condition: like new (used), Used high quality URSVIKEN 400ton x 5metre cnc Press Brake for sale Very clean 5metre cnc pressbrake for sale – European / Swedish made machine Model = Optima 400 5.1/4.37 Bed Length 5000mm / 5metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – Presscad 900 – the same control as Bystronic and Edwards Pearson pressbrakes Multiple Forming Tools 8m x 4m (26ft x 13ft) Footprint (inc. Tool Trolley and Controller 26.5 tonne Machine Weight Year / new 1994 Refurbished in 2016 Full Working Order Stop time 55ms Max working pressure 31.8MPa Guard distance 90mm Complete with a good selection of tooling – we can quote for brand new top and bottom tooling to bend your steel on this machine Bdjdpfx Agjhikggskei The full services of delivery, installation and training can covered.