Used Press Station for sale (16,719)

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Lodpezfnb Rjfx Abyshh Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Lhsdpfx Abezfmy Eoyjh Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Lhsdpfx Asykl Iasbyoh Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: new, functionality: fully functional, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc. Lhsdpfxeiq Di As Abyeh

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf Ljdoyzpf Eopfx Abyohh 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l Lhsdpfx Abjzf Nrksyeh total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision * Compact design = small footprint * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Ledjzgfv Ujpfx Abyshh Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 175 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, ram plate length: 3,700 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 175 tons and a bending length of 3700 mm. Standard Features: Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3700 mm Distance Between Columns: 3200 mm ESA S830 CNC Control Unit 10” 2D Touchscreen Manual bending sequence and collision control Automatic compensation calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized Back Gauge X-axis: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis: 250 mm Hardened ball screw Linear slide system Optional X-axis: 1000 mm Tooling System 2 back gauge fingers European-type Promecam quick die clamping system CRONOSSTECH special narrow lower table Eurostamp ES1260 upper die Eurostamp ES2067 lower die Ledpfxjzb Inks Abyohh Amada compatible tooling system Standard Equipment B Series open frame design GIVI linear scales LED lighting VDE electrical panel Schneider or Siemens electrical components HAWE hydraulic block Eckerle pump Siemens drive Single pedal system Energy-saving Standby function 2 adjustable front support arms Optional Features CT-BEND X+R servo motorized back gauge AKAS II front safety laser system PLC safety module Rear light curtains Delem DA53Tx CNC control unit CNC controlled motorized compensation system X-axis 1000 mm extension Technical Specifications Bending Force: 175 Tons Bending Length: 3700 mm Distance Between Columns: 3200 mm Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Table Height: 955 mm Machine Length: 5300 mm Machine Width: 2430 mm Machine Height: 2990 mm Approach Speed: 180 mm/s Return Speed: 130 mm/s Bending Speed: 10 mm/s Oil Tank: 180 L Weight: 10,500 kg Main Motor: 15 kW X-axis Speed: 300 mm/s R-axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey. 🇹🇷

Condition: good (used), Year of construction: 2014, functionality: unexamined, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Machine weight, approx.: 9,000 kg Space requirement, approx.: 4000x2100x2700 mm Accessories/Equipment: - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control system - Side safety doors - Amada tool holder - Crowning Ledezd Tnyspfx Abyshh

Condition: good (used), Year of construction: 1989, Pressure 50 t Bending length 2050 mm Weight approx. 7,000 kg Accessories: -Foot pedal -Hydraulic upper tool clamping -2 manual movable backgauge fingers -Tools -Controlled axes: y1, y2, X, R Lsdpfx Abswn Earsyehh -Controller Cybelec DNC 60

Condition: good (used), Year of construction: 2001, functionality: fully functional, Press force: 230 t Bending length: 3060 mm Lhjdpfxezd Tkbe Abyeh Frame width: 2690 mm Stroke: 365 mm Control system: DELEM DA 65 Overhang: 410 mm Installation height: 535 mm Dimensions: 3660 x 2310 x 3100 mm Machine weight (approx.): 17,700 kg Equipment: - CNC control system Delem - Crowning - Wila tool holder - 1 bending aid - 2 support arms - Side protection doors - 2-hand foot control - Die shifting - 2 manually adjustable stop fingers - Controlled axes: y1, y2, x, r - Operating hours: 13,993 h

Condition: good (used), Year of construction: 1994, functionality: fully functional, Press force: 160 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 250 - 400 mm Lhsdpfozd S Tzex Abyeh Machine weight approx.: 15,400 kg Equipment: -Hydraulic tool clamping, top and bottom -Cybelec DNC 900 control system -Die shifting -Compensation -2-hand foot control -Controlled axes: y1, y2, x, R, z1, z2 -Tool set

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping Lhedpjzd S Thjfx Abyeh - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec - Pneumatic upper and lower tool clamping - Die shifting - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 Ljdpfx Abezd Sqysyehh - Compensation - 2-hand foot control - Side protective doors

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 130 t Bending length: 3100 mm Frame width: mm Control system: DELEM DA-69TW Stroke: 365 mm Machine weight (approx.): 12,950 kg Accessories: - 2 support arms in front of the machine - CNC control system Delem - Crowning - Die shifting Lhedpozd Snxefx Abysh - Wila tool holder - Side protective doors - Light curtain - Controlled axes: y1, y2, x, r - 2 adjustable support fingers

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Lsdpfx Ajzd Tf Sobyohh Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,700 kg, Shelf length: 3000 mm Shelf width: 1300 mm Hot water heating system Two daylight openings 6 hydraulic cylinders Cylinder diameter: 85 mm Emergency safety pull-cord switch Timed press opening Lhedpfx Aozgf Uwobyjh Daylight opening: 400 mm total / 2 × 180 mm Year of manufacture: 2006

Condition: excellent (used), functionality: fully functional, overall weight: 4,000 kg, shelf length: 3000 mm shelf width: 1300 mm water heating 6 hydraulic cylinders Lsdpjzgf Tyefx Abyshh cylinder diameter: 70 mm safety switch – shear pin Weight: 4000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to max. bending length 2000mm arrester behind Lhedpfxswagyko Abysh drive capacity 4,5 kW weight 3000kg

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ledpezdanzefx Abyjhh Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used pellet mill OGM 1,5 with 75 kw main engine. Capacity from wood about 1 tone/hour. Include a lot of spare part: - new ring die 6mm for wood: Salmatec Brand ( price from manufactory 2700 eur for 1). - New bearing for roller 10 pcs. Ledpsx R Suzsfx Abyohh - New roller shell 10 pcs. - other spare parts, main axhis, plates for rolles.

Condition: used, Technical specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Back gauge Lsdpjx A Afrjfx Abyjhh - Emergency stop button - Foot control

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Lhedpfjya Iaqox Abyjh Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Lhedpfx Abjzd Hm Njyoh Storage location: Nattheim.

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: Ljdjzccw Nopfx Abyjhh - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)