Used Profile Rolling Machine for sale (70,768)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Iaodjynmx Iepfx Abcjp OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 22300 € 428.16 € 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm 3.5 mm 3.5 mm 2.5 mm 130 mm 130 mm 130 mm 5 m/min 3300 mm 1150 mm Ijdpfx Asynmwdjbceap 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 16000 € 307.2 € 2050 mm 4 mm 140 mm 2.2 kW 3200 mm 750 mm 1000 mm 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward Iaedpfoynmv Tox Abcep forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)

Condition: new, Year of construction: 2026, Rondo Automatic Dough Sheeter - Model: Rondostar - Year of manufacture: 2026 - Brand new - Computer-controlled - Automatic flour duster - Automatic dough winding - Warranty - Collection from warehouse / shipping option - Price on request Iedpfx Aoyucz Sobcsap

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V shaft diameter: 100 mm total power requirement: ca. 15,1 kW weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel Iodewh Rq Nopfx Abcsap accessories: - various bending rollers without profile *

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, roller (top) diameter: 60 mm, roller length: 1,250 mm, sheet thickness (max.): 2 mm, overall weight: 240 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,180 mm, A sheet metal rolling machine designed for forming pipes, cylinders, and other rounded metal elements. The machine is equipped with rollers driven by a manual lever and gear transmission, ensuring smooth and precise operation. The three-roller system allows convenient pre-bending of the material. The removable upper roller makes it easy to remove finished workpieces. The stable and heavy construction of the machine ensures safe operation during use. The product is made from high-quality materials and manufactured using modern technological solutions, ensuring safety, operational reliability, durability, and resistance to heavy-duty work. Technical specifications Roller length: 1250 mm Maximum sheet thickness: 2 mm Roller diameter: 60 mm Dimensions: 1750 × 650 × 1180 mm Weight: 240 kg Sales conditions The machine is brand new 12-month warranty Iasdpfx Aoytf Dyjbcop Warranty service Post-warranty service Delivery to the customer is available. The delivery cost is determined individually based on the quotation provided by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, input voltage: 400 V, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, Technical Specifications Material: round / rectangular tube: 70 × 2 mm / 60 × 60 × 3 mm Material: round / square bar: 35 mm / 35 × 35 mm (diameter) Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 3-phase, 400 V Dimensions (L × W × H): 900 × 850 × 1700 mm Weight: 450 kg Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Iasdpfxoytffwj Abcep Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: used, THOMMEN Rouleuse de filets is a thread rolling machine, engineered for precision, high accuracy and reliability. Working capacities (diameters, modules, lengths, travel ranges, workpiece dimensions) are not specified in the provided data. Main technical specifications (spindle speeds, feed rates, power supply, dimensions, weight) are not indicated in the available information. It enables achievement of tight tolerances and is suitable for automotive, watchmaking, machine tools, aerospace and medical applications. Iodpfsyr Hf Nox Abceap

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm Isdpforz Tutex Abcsap - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used profile bending machine from Sahilner Model: PK 40 Shaft diameter: 40 mm 3 driven rolls Including various tools Iaedpfx Asytb Afsbcsp Year of manufacture: 1997

Year of construction: 2014, condition: excellent (used), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations, such as milling, drilling, and tapping, are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with tool spindle as an additional axis. Machining length (X-axis): 7200 mm Travel (Y-axis): Typically 485 mm (max. 60 m/min). Travel (Z-axis): Typically 340 mm (max. 60 m/min). Spindle speed: Standard 6000 rpm or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated 8-position turret or 4 angle heads, ensuring short tool changeover times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Ijdpfx Aeyt H Uyjbcoap Prepared tooling dedicated for PVC+STEEL machining: - tool holders, - reducer for steel machining, - special tools with chip breaker, - dedicated programs for machining door profiles,

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Technical data on photo Iedpfx Aboytn E Tocoap

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. Isdpfx Absydk D Hocsap New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Isdpfx Abexytmhjceap Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: new, functionality: fully functional, PRICE on request, Great offer! 4-roll plate bending machine Iasdpfx Aeyg Hckobcjp Operation: Hydraulic Plate thickness: 30 mm (1.2 in) Plate width: Max: 2,100 mm (47 in), Min: 500 mm (20 in) 2 pcs. side supports for large diameters

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Iaodpeycu E Eefx Abcep Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Iajdpfx Aoyrq Dvobcsp Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, control type: CNC control, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 550 mm, side roll diameter: 450 mm, working width: 3,000 mm, sheet thickness (max.): 65 mm, overall weight: 52,000 kg, power: 94 kW (127.80 HP), input voltage: 400 V, Prebending full length: 40mm Bending capacity ø1.65m full width: 45mm Bending capacity ø1.65m width: 1.5m: 56mm Bending capacity ø>3.5m full width: 52mm Bending capacity ø>3.5m width: 1.5m: 65mm Working length: 3000mm Top roll: 550mm Side rolls: 450mm Isdpeyuu I Rjfx Abcjap Year of manufacture: 2009 Main motor: 94kW Rated current: 189A Length: 6700mm Width: 2950mm Height: 3020mm Weight: 52 tons Top support up to ø6.5m Side support Cone bending attachment Hydraulic drop end Powered infeed roller table with hydraulic side movement of the plate.

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll sheet bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Iaedsyvg Hvjpfx Abcop Weight: 800 kg Offered at EUR 2,000—plus VAT, ex location

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Isdpfx Abjyn R Ugecsap Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm Iaodskzg E Aopfx Abcop max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 Iajdpfx Aeypk Ebebcsp - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² Ijdjylyh Dspfx Abcjap - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Iedsh Alh Hepfx Abceap Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Year of construction: 2008, condition: excellent (used), functionality: fully functional, ❇️ elumatec SBZ 122 / 30 – CNC Machining Center for Aluminium Profiles Very good condition | Fully functional | Well-maintained industrial machine — For sale is a high-quality CNC machining center elumatec SBZ 122/30, coming from a window and façade construction company. The machine is in very good, well-kept, and fully operational condition and was used productively up to its removal. Ideally suited for efficient processing of aluminium, light metal, and thin-walled steel profiles in professional window, door, and façade manufacturing. The machine was ordered at the end of 2007, with delivery and commissioning in May 2008. It was operated exclusively by a single, highly conscientious employee throughout its entire period of use, including all necessary work preparation. Inspection and functional testing on site are possible by prior arrangement at any time. — ❇️ Machine Details • Manufacturer: elumatec • Model: SBZ 122 • Machine type: CNC profile machining center • Application area: Windows, doors & façade construction • Control: elumatec CNC control with operating panel & keyboard • Axes: CNC-controlled multi-axis processing • Material processing: - Drilling - Milling - Tapping - Notching / machining of profiles — ❇️ Equipment & Highlights • CNC machining unit with automatic tool changer • Integrated roller conveyor / material support • Multi-beam safety light curtain SICK M4000 • Pneumatic clamping system • Cooling & lubrication unit • Operator panel with display & keyboard • Foot switch • Heavy-duty industrial design – durable & precise • Ideal for series and single-part production ❇️ Working Area / Travel Ranges • X-axis (longitudinal travel): approx. 3,850 mm → Max. machining length approx. 3,750 mm (without end-face machining) → Approx. 3,650 mm (with end-face machining) • Y-axis: approx. 350 mm • Z-axis: approx. 280 mm The stated values correspond to the typical technical specifications of the elumatec SBZ 122/30 model and are tailored for machining common aluminium profiles in window, door, and façade manufacturing. — ❇️ Condition & History • Very well-maintained overall condition • Technically fully functional • Maintenance and any necessary repairs carried out by Vincon (official elumatec service and sales partner) • Use of genuine spare parts • Very low reject rate due to thorough work preparation and operation • Minimal tool wear • No known technical defects — ❇️ Documentation & Accessories • Operating manual for SBZ 121/122 (2 copies) • Operating manual for SBZ 122/20+30 • Tool list including recommended cutting data • CD-ROM for multi-beam safety light curtain SICK M4000 • Copy of original invoice from 2008 with details on the delivery scope at that time — ❇️ Technical Data • External dimensions (L × W × H): approx. 7,000 × 2,200 × 2,600 mm (Provisional value; exact dimensions upon inspection) • Weight: approx. 4,500 kg (estimated) — ❇️ Price €18,900 net plus 19% VAT — ❇️ Terms & Conditions • Sale is conducted on behalf of the customer • Invoice with VAT itemized • Location: 72229 Rohrdorf • Loading possible on site via overhead crane — ❇️ Inspection & Contact Iasdpfxox Tfi Re Abcjp Please feel free to call or message – inspection is strongly recommended.