Used Projection Welding Machine for sale (85,437)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION Iajdpercy Trjfx Adwjl - Gasket pressing system

Condition: used, Year of construction: 2000, current intensivity bis 300 A burner heads . dimensions of the machine ca. . m Iasdpfx Asyacp Hedwel

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Scope of delivery: Iaedpfx Asxhd Tusdwel ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Pressure regulator

Condition: good (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, Cloos laser welding system in 2-station operation with automatic shuttle system for loading and unloading. Kemper extraction system. Safety technology. Lifting weight of the turning devices per station 2000 kg. Technical data see description, chapter 2 System is available from October 2024 and has been regularly maintained. Location Germany. Demonstration and inspection possible. Services on request. Iasdpfxougv H Ns Adwsl

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Iasdpfxeug Unfj Adwol Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source from MaxPhotonik - German menu guidance - Universal device for welding / cutting / cleaning - Incl. 4-roller welding wire feed - Integrated water cooling - Immediately available - Leasing or hire-purchase available via our financing partner Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Isdpfxjvgdt Ao Adwjal Control cabinet: Machine no.: 20100079

Condition: new, Year of construction: 2025, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? Iaedpfx Askkbw Usdwol The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Condition: used, Year of construction: 2000, current intensivity bis 350 A Iajdpfx Ajyacpyodwsl burner heads . dimensions of the machine ca. . m

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 238910, type of input current: three-phase, input voltage: 400 V, Flash butt welding machine iDEAL type BAS 050-11. It is an optimal, long-term solution for your production, which has been successfully implemented several times by customers in Europe and worldwide. INCLUDED: - Flash butt welding machine iDEAL type BAS 050-11 - iDEAL Shear AHE 080 Ijdpfxsx Uw Sao Adwjal - iDEAL grinding machine SMH 060 - box with grinding wheels in attached picture

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 Iedpfju Nv Eaox Adweal *

Condition: good (used), Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter Iaodji Agxujpfx Adwel -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable -Dimensions: 560/290/H500 mm -Weight: 44 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Iaodpfx Adsvbgxqswel Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Iodpfoizr Rlox Adweal Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 Iaodsx U A Ruepfx Adwel +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), 1 used gas-shielded arc welder make Dalex type Variomig Technical data Welding capacity at 500 A 60 % Welding capacity at 315 A 100 % Weight 135 kg Water-cooled version ready for welding with torch earth cable pressure regulator Ijdou Ub E Tepfx Adwoal earth cable

Year of construction: 2022, condition: as good as new (ex-display), DROSTE Welding Table for band saw blades: for new blades and for welding cracks ST260: Automatic with TIG or MIG System Automatic welding feed programable Iaedpfsuh Sp Nox Adwsl Annealling System Preheat plate Technical Details: Blade width: 30 – 260 mm Blade thickness: 0,6 – 2.0 mm

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m Iaodswl Dptjpfx Adwel -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: used, This is an SKS LSQ5X welding power source Included in the scope of delivery Isdpfsuxlz Asx Adwjal 1x LSQ5X welding power source 1x SKS Frontpull 8 (23°) 1x SKS Power Feeder PF5 1x Powerclutch HD collision protection 1x Q80 welding process controller

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Wegmann Basel Laser TR6000 PI GON for sale. Was in operation until recently and works perfectly. Being replaced due to a newer device with a maintenance contract. - Year of manufacture: 08/1999 - Model: TR6000 Iedpfx Asx U Etljdwoal - Serial no.: 819 - 6900 watts - Wavelength: 10,600 nanometres - 400V - Maximum current: 85 amps Loading by forklift. Delivery available upon agreement.

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t Iaedpoucgvajfx Adwsl

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Iasdpsxnqnxjfx Adwjl

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 Iajdpsqvp Nkjfx Adwol -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Iajdpfxovgd Efe Adwel Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder TYPE: MSV 08

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Ijdjxpf N Topfx Adwjal Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Ijdpfxoh Nvfno Adwjal Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg