Used Projection Welding Machine for sale (93,517)

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Hodpfx Asxdda Hjabofn

Condition: used, Year of construction: 1972, throat 300 mm short circuit voltage 118 kVA Hodpstn Enrsfx Aabjfn voltage 380 V rated capacity bei 50% ED = 50 kVA weight of the machine ca. 700 kg dimensions of the machine ca. 0,65 x 1,20 x 2,00 m

Condition: used, Micomat 250 Hfjdpfxoxc Tw Ss Aabjn - 40-250A welding current - Shipping available at extra cost

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 16kVA Short circuit-current: 17kA Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: MPS 15036 (5-times, 1-program) --- Extra Equipment: Hfodpfxexcx Nte Aabsn - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2008, condition: as good as new (ex-display), NEVER USED !!! Hsdoptbt Aspfx Aabsfn Butt welder machine Wire diameter range - 8,00 mm - 25,00 mm Manufacturer - SMEI ( Italy ) Model - PT/5 Construction year - 2008.

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Hfedpougv S Sefx Aabjn

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Hfsdpfx Aoxdda Tsabjn

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 170 kg, type of cooling: water, input current: 16 A, laser power: 2,000 W, input frequency: 50 Hz, continuous power: 3 kW (4.08 HP), Equipment: documentation/manual, type plate available, LMH-2000 – Industrial Laser Welding Machine – 2000 W Fiber Laser – 4-in-1 Description The LMH-2000 is a state-of-the-art 4-in-1 fiber laser welding machine of the latest generation. It combines welding, cutting, brazing, and surface treatment in a single system. Based on the proven LMH-1500, the LMH-2000 offers even greater power and flexibility with its 2000 W laser source – ideal for thicker materials and demanding applications. Featuring an energy-efficient fiber laser, stable cooling system, and ergonomic hand-guided operation, this machine is perfectly suited for continuous industrial 24/7 operation. Technical Data Model: LMH-2000 (4-in-1) Laser Source: 2000 W (Raycus / MaxPhotonics – depending on configuration) Laser Type: Fiber Laser Functions: Welding, Cutting, Brazing, Surface Treatment Operating Mode: Continuous operation possible Cooling System: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheets and more Energy Efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic hand-guided torch, optional wire feeder Advantages 4-in-1 functionality – highly versatile Increased power (2000 W) for maximum welding speed and material thickness CE compliant according to Machinery Directive 2006/42/EC and relevant EU standards Clean weld seams with minimal post-processing required Rugged design for industrial use Flexible applications in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Test: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Instruction on operation and application is available by appointment. Extras & Accessories Wire feeding system Shielding gas solutions Replacement nozzles and wear parts Extras & accessories (optional) Replacement nozzles and wear parts: Ideal for workshops, mechanical engineering, metal fabrication, automotive bodywork, or maintenance. Hfodjxc Ebcspfx Aaben 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: By freight carrier (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!

Condition: good (used), – Capacity 16 kVA Hsdpfx Aexdfgzsabefn – Control TE 90 Mark II – Documentation – 400V

Condition: used, Messer Griesheim Resistance Welding System PFU 20 – Used for Sale A fully functional PECO resistance welding system from Messer Griesheim, model PFU 20, is available for sale – ideal for spot and projection welding applications in industrial environments. Technical Data: Type: PFU 20 Serial No.: 6001429 Rated power: 20 kVA Maximum welding capacity: 24 kVA Maximum short-circuit power: 42 kVA Short-circuit current I₂max: 13 kA Open-circuit voltage: 1.8 to 3.2 V, adjustable in 8 steps Primary voltage: 380 V Frequency: 50 Hz ⚙️ Features: Rotary switch for transformer adjustment Hodoxb A Abopfx Aabefn Selectable time control Robust steel housing Control panel with German labeling

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm Hfjdpjqw D Eijfx Aabon -Total weight: 99 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, welding current (min.): 30 A, welding current (max.): 280 A, Note: This is a Trade-in. For sale: Saf-Fro Safmig 300 BLX 30-280 AMP 400 Volt 2/4 Step 4 Roller drive 12 Steps adjustable Soft start Spot welding Interval welding Steel – Stainless Steel welable Refurbished, serviced, and tested. Including a Parweld PRO3600 wlding torch, earth work lead, gas cable, and interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Hsdpow R Urusfx Aabefn Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Hjdpfxsxdc Upe Aabefn

Condition: used, Hitachi 300A DT-NP 3 VT Hedpsxb S Utjfx Aabjfn - without additional accessories - shipping possible at an extra charge

Condition: good (used), nominal power at 50% duty cycle: 100 kVA, – Power 100 kVA – Pneumatic – Throat depth 900 mm – Bosch PSP 2000 control Hfsdpjxc Nx Esfx Aaben – 380 V

Condition: used, current capacity max 114 kVA Hfsdpsw Nrvnsfx Aabjn throat 550 mm contact pressure capacity . kp weight of the machine ca. 290 kg Little used, in good condition, comes from a public institution including water cooling unit

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg Hfjdpfx Aaog Rcpxebjn

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, welding current at 60% duty cycle: 365 A, welding current at 100% duty cycle: 300 A, protection type (IP code): IP23, welding current (min.): 50 A, welding current (max.): 400 A, Equipment: type plate available, Note: This is a Trade-in. For sale: Weldtronic Synertec 6003 (Pulse) 50-400 AMP 400 Volt Pulse Synergic 2/4 Step 4 Roller drive End current Bi level Fixed programs Hfodpfx Ajw Rkxdsabjn Steel, Stainless Steel, and Aluminum weldable Refurbished and Tested. Including a PRO5000 Welding torch, earth work lead with clamp, gas cable, and 10 Meter interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 16 A, Equipment: type plate available, Migatronic TIG DC HP Excellent TIG welding machine with the best working settings. Designed for complex welding tasks in the field. Hodpfx Aaevbyazsbefn The ideal service and assembly machine.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 1,500 kg, We offer 2 PCs of following sets, price stated for 1 piece: Four-head horizontal welding machine 1 HOLLINGER automatic welding machine with parallel pressure of the profile bars in x-axis and y-axis - MSP-I-280-300 for simultaneous welding of four corners, electronically controlled position adjustment of all welding units - PC control, LCD touch screen Adjustable weld boundary caterpillar 2,0 mm, clamping height 140 mm. Welding working width: max. 3.000 mm min. 420 mm Length: max. 2.800 mm min. 320 mm (without contour inserts) Industrial PC - VGA-LCD colour 1 display, 3,5" floppy disk drive, welding settings welding parameters and temperature for each profile individually program. Weld caterpillar enclosure 1 to 0.2 mm Weld boundary heating, 1 separate adjustable continuous temperature control from 20°-100°C Quick-change device for replacement 1 welding foil Forming unit for welding 1 profiles with seals working in two axes (set = 4 pcs) The welding machine is equipped with a welding machine with a welding control unit for the welding of corners. controllable drive of the conveyor belts, inte- an integrated control device for transferring the the welded window frame to be turned. the turning unit of the automatic cornering machine corners, switching all necessary controls. of the control elements, is done from the switching of the welding machine. Length: 3,200 mm Width: 2,300 mm + Automatic corner stop 1 CNC 4 HF for wings Four-axis horizontal milling machine machine With linear technology,PC control- Windows XP , pneum. clamping machined profile, machining Hfsdpew Tbydjfx Aabsn 300 x 300 mm, up to 3.000 x 3.000 mm Machining time at 1.500x dimension 1.500 is 85 to 100 s Clamping unit for upper and lower view surfaces Vertical CNC controlled milling unit for the seal groove, used in usable from top and bottom corners, with vertical knife, usable from top and bottom Clamping unit for indoor corners with radius or chamfer, including a vertical clamping unit with de- with a 0- 20° bevel for use from above and from below Crimping unit for internal corners corners with radius or chamfer, including a vertical crimping unit with de- with a clone of up to 20-45°, usable from above and from below NC program including data transfer from the welding machine Milling wheel ø 170 mm Milling cutter for pre-set milling wings Drilling and milling unit Turning station for automatic rotation with linear transport with work table, drive elements elements and software Table dimensions: 6,000 x 2,500 mm Extraction device Type FA 160 2 Connection 120 mm, incl. 160 mm, connection transitions and suction hose, 2.2 kW motor, 400 V, 50 Hz, suction power 2.200 m3/h, inlet vacuum 1.700 Pa, filtering area 2,5 m2

Condition: used, functionality: fully functional, machine/vehicle number: 8008 31 50 04, type of input current: three-phase, type of cooling: water, hose package length: 4,000 mm, Equipment: type plate available, Welding machine with separate wire feeder (long connecting hose) Hjdpow Uiqmjfx Aabefn

Condition: used, MIG MAG welding machine, protective gas welding unit EWM type MIG 230 Serial No.: L Year of manufacture: 1994 Output 230 Amp. = 35% duty cycle 120 Amp. = 100% duty cycle Adjustment range: 8 steps Power connection: 400 V, 50 Hz, 16 Amp. plug - 2-stroke and 4-stroke welding operation - Spot welding function - 2-roller wire feed - 3-meter hose assembly with central connection - Welding gas pressure reducer Dimensions (L x W x H): 1000 x 450 x 700 mm Hjdpeitv Nnsfx Aabsfn Weight: 70 kg in good condition

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 230 V, ground cable length: 4,000 mm, warranty duration: 24 months, hose package length: 4,000 mm, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 1 A, welding current (max.): 220 A, OTC DTX 2200 AC/DC Metals that can be Welded: Steel – Stainless Steel – Aluminium 1A (DC) / 3A (AC) – 220A 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre Gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Start Current (5 – 220A) End Current (5-220A) IP23S IEC 60974-1 IEC 60974-10 IEC60974-3 SR26 U/D 4M TIG Welding Torch Earth work Cable 35mm² 4m with Clamp Gas hose 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. Hedpfx Aow N Irxeabefn We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Hsdpfx Aasdzqa Isbefn Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Hodpfx Asg D H Rusabofn Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition