Used Pulley for sale (403)

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: with rubber coating, diameter 236 mm Bedolug R Sjpfx Acfeww -Transport width: 750 mm -Shaft: Mountings Ø50 x 100/450 mm, dimensions see photo technical drawing -Quantity: 1x transport roller available -Dimensions: Ø 236 x 1300 mm -Weight: 53 kg

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Bwsdpfxeyhduys Acfow Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms - Hydrostatic advance - Automatic centralized lubrication with pump - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT Bedpfjzmfrcox Acfjww -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: with rubber coating, diameter 335 mm -Transport width: 945 mm Bwedpfslug Slsx Acfow -Shaft: Mounting Ø50/60 mm, dimensions see photo technical drawing -Quantity: 1x transport roller available -Total dimensions: Ø 335 x 1445 mm -Weight: 118 kg/piece

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 315 mm Bsdpfx Acjlug Stofsww -Transport width: 750 mm -Shaft: Recording dimensions see photo technical drawing -Quantity: 1x transport roller available -Total dimensions: Ø 315 x 940 mm -Weight: 81 kg/piece

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley Bwodsy Aklvepfx Acfsw -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Bjdpfx Acszwfxwjfsww Operators control station including speed control and start stop controls Working height 800mm

Condition: used, mileage: 2,76,773 km, power: 115 kW (156.36 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Iveco 35S16 SV panel van (Vehicle 11) First registration: 15.08.2019 276,773 km Engine: 2,287 ccm 115 kW / 160 hp Euro 6 Permissible total weight: 3,500 kg TÜV (technical inspection): 09/2027 Unladen weight: 2,397 kg Bodpsz R Ha Ijfx Acfoww Payload: 1,103 kg Overall length: 5,963 mm x Overall width: 2,010 mm x Overall height: 2,660 mm Auxiliary headlights Tires: 225/55R16, front approx. 60%, rear approx. 30/40% Trailer hitch with ball head Double doors, 1/2 and 1/2, at the rear Side sliding door on the passenger side, damaged 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rear-view camera with monitor Cruise control Storage compartment above Last repairs: Service on 06.06.2025: Maintenance service, water cooler GR, new coolant hose, new exhaust gas turbocharger Service on 23.09.2025: Maintenance service, fuel line, air conditioning refill, filter cover, turbocharger solenoid valve, stabilizer link + connecting rod rear axle, front brake calipers overhauled and front brake pads replaced, new Service on 24.02.2026: Maintenance service, particle filter regenerated, all injectors new, crankshaft pulley new, valve cover new Price: €6,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors and prior sale.

Condition: used, mileage: 3,54,774 km, power: 235 kW (319.51 HP), first registration: 03/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * Our internal number: 1077 * PICK-UP PRICE / Final price -> as is, where is. * MAN A 20 * Retarder Bwsdpfjygp Hfsx Acfew * Automatic transmission * AIR CONDITIONING * SEATS also have 3-point seatbelts facing forward * CUSTOMER SERVICE performed in 06/2025: * e.g., oil change, fuel filter, pre-filter replaced, * oil filter, air dryer cartridge, idler pulleys / tensioner pulleys / * V-belt, FRONT AXLE completely overhauled, SHOCK ABSORBERS new, greased, .... * Matrix with control unit GORBA * Screen cabling incl. bracket * Folding ramp * Convector heater * 45 seats * 4 x folding seats at the KIWA parking space * 31 standing places * Raising/lowering * Paint: white * etc. * TAKE-AWAY PRICE * All information without guarantee * We reserve the right to sell the vehicle prior to sale * We expressly refer to our terms and conditions

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Bwedovuhumepfx Acfsw Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm Bwjdpfslzmxksx Acfjw -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 795 mm -Weight: 68 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set Bwodpfx Aozia Rrscfjw -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Bjdpfsy Tptmsx Acfeww Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock

Condition: used, Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm -Intake: Ø 60 x 120 mm Bodponch Iujfx Acfsww -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg

Condition: new, Year of construction: 2023, machine/vehicle number: 2019008911, - 300 mm diameter - 3 m3/h - Extruder screw speed: 23 rpm - Pellet cutter - Die set + box with screws + soil input sensor - 55 kW, 1500 rpm motor with pulley, belts, and tensioner rail set - 75 kW, 1500 rpm motor with pulley and belts - OCS 4/5.5 VFB oil-sealed rotary vane vacuum pump with separator Bwjdpfx Acj Ahpapofow - Part of the refrigeration system

Condition: good (used), Year of construction: 2017, input voltage: 400 V, working width: 400 mm, power: 26 kW (35.35 HP), CALIBRATION – PLANER MACHINE, MANUFACTURER - LEDINEK COMPANY, Type ROTOLES 400 D – S, Year of Manufacture – 2017. TECHNICAL DATA Working dimensions: Working width: max. 400 mm Working thickness: 2 - 150 mm Working length: min. 150 mm Table height: 900 mm Feed rate: 10 - 45 m/min. For specific information regarding workpiece dimensions, please contact us. Drive motors: Thickness rotor: 22 kW Feed: 3 kW Ram drive motor: 0.37 kW Tooling: Rotor speed: 2,940 rpm Number of reversible inserts on the rotor: 48 pieces Machine color: RAL 5021 Water blue; for the machine frame, heavy tool housing, frame of Bjdpozd E R Hsfx Acfjww soundproof cabins and guards, conveyors. RAL 1014 Ivory; panels of the guards, dust extraction hoods. RAL 1028 Melon yellow; moving and rotating parts (pulleys, universal joints, feed wheels).

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Bsdpfslug Sdex Acfoww -Transport roller: diameter 211 mm -Transport width: 745 mm -Shaft: Mounting Ø30 x 125/115 mm -Quantity: 1x transport roller available -Total dimensions: Ø 211 x 985 mm -Weight: 47 kg/piece

Condition: new, DEMAG traverses with rope pulleys for Bodpou U Nhvefx Acfoww P Train / DR / MDR / DH

Condition: good (used), V-belt pulley, pulley -Diameter: 570 mm -Total width: 237 mm -Belts: 9 Bwodpfx Ajct H T Nocfew -V-belt width: 22 mm -Hole: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Bodpolug Szjfx Acfsww -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Bedpsrixi Njfx Acfoww Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Bwodpfx Acsrfw Ikefew Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 215 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 70/60 mm -Quantity: 1x transport roller available Bwedpepumakofx Acfsw -Total dimensions: Ø 215 x 880 mm -Weight: 39 kg/piece

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing Bodpfsct H T Eex Acfeww -Diameter: 570 mm -Overall width: 314 mm -Belts: 12 -V-belt width: 22 mm -Taper bushing mount: Ø 95 mm (can be replaced) -Pulley: balanced -Quantity: 1x pulley available Price: per piece -Weight: 169 kg -other pulleys in stock

Condition: good (used), V-belt pulley, pulley Bwsdpfx Acoz Ah Ekjfew -V-belt pulley: 5-groove pulley SPC 200/5 with taper bushing -V-belt width: 22 mm -Receiver: Taper bushing manx 3535-65 Ø 65 x 90 mm (can be replaced) -Dimensions: Ø 210 x 135 mm -Weight: 18.1 kg