Used Pulley for sale (406)

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Dlodpfxjx D A Uce Addsa Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with 2-speed hand pump, 30 ton. OMCN P30/SA hydraulic press with manual operation by two-speed hand pump and sturdy basement structure that provides maximum stability and minimum floor space. Thanks to the perforated frame, the support base can be adjusted in height to 9 different positions so the press can be adapted to work with parts of different sizes. The winch allows the pallet to be lifted conveniently and quickly. Dedeklyvtepfx Addela +rapidity in approach +precision Indispensable on the shop floor and in the industrial sector, perfect for pressing metal objects, such as during assembly of mechanical assemblies, keying of bearings or pulleys onto shafts. Made in Italy and CE certified press made of sturdy materials that ensure reliability over time and is capable of generating a force of 30000 kg. Overall dimensions 2180 x 1300 x 600 mm Weight 280 Kg Pressure 30 tons Distance between shoulders 695 mm Piston stroke 190 mm Piston diameter 60 mm

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm Dsdpfxevw Rnno Addola weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked Dljdpfsxm Rq Rjx Addja to metal strips for profile package.

Condition: good (used), Code: 0642 Brand: FBR - ITALY Model: L/93 - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials and various - FBR - ITALIA L/93 - CE Standard Table length mm 3000 Table width mm 800 2 speed motor - Power Hp 3/4 Belt length max mm 7800 Belt width mm 120 Automatic belt lifting Pulley diameter mm 200 Suction motor Hp 1 Suction connection diameter mm 120 Dlodpox Dk Hyofx Addea Weight kg 680

Condition: good (used), Spur gear chain hoist, spur gear chain hoist, chain hoist, chain hoist with trolley, pulley block -Load capacity: 500 kg -Hook path: 3000 mm Dedpfx Adeb A Hc Hodola -Max. Beam width: 80 mm -Own weight: 60 kg

Condition: new, color: orange, Year of construction: 2025, Applicable material: Concrete Empty weight: 8.500 kg Cargo space capacity: 30.000 l Dlodpfxox D A Sbs Addea Capacity: 30 m^3/h Aggregate bunker : 4 x 6 m3 or 2x12m3 Seperation Available Aggregate tranfer conveyor 650 mm x 2450mm Main Chassis Cement weighing bunker - 300 kg Water weighing bunker - 200 L(galvanized) Additive weighing bunker – 50 lt kg(galvanized) Compressed air installations - Pressus POLYGON P500 - Planetery mixer: 0,75/0,5m3(Brand:Polygon) 18,5 KW Ermaksan Gearbox. Gamak Engine Power Board and Control Panel Automation system - PLC(Siemens) + PC ,Printer, Touch Panel and Electric Components Water Pump 20 m3/Hour) Support Structure Tandem Axles, Tires and Hook for Easy Transport Handrails, Maintenance Platform, Ladders are Galvanised 800X13 500mm Concrete Discarhe Transfer Belt Conveyor for Transmixer with Special Scraper (4 Meters Height) Bolted Type Cement Silo(50 Tons)+Cement Screw(WAM)168*5000mm +Silo Equipments(WAM)(Silo Filter, Air Jets, Safety Valve,Level Indıcators max-min with alarm systems) (All WAM) PLANT DETAIL BRAND POLYGON MODEL POLYGON PAC30 CONCRETE PLANT PLANT MODEL CONCRETE PLANT WITH PLANETERY MIXER PLANT CAPACITY Fresh Concrete 30 m3/Hour AGGREGATE BUNKER CAPACİTY 4x6= 24 M³ CEMENT WEIGHT CAPACITY 300 kg WATER WEIGHT CAPACITY 150 kg MIXER CAPACITY 750-500 LT PLANETERY MIXER(P S1000) TOTAL ENGİNE POWER 65 Kw NUMBER OF MIXER ENGINES 18,5 kw GAMAK VOLTAGE 380V - 50 Hz METALLIC STRUCTURE/MAIN CHASSIS The main chassis has been designed according to field experience and so as to easier transportation, installation, maintenance, operation processes. Aggregate Bunker Weighing capacity : 24 m3 Aggregate Compartment : 4 x 6 m3 compartments, 1 evacuation doors per compartment Vibrator : 2 Pieces Kemp 200/3 Aggregate Feeding Belt Dimensions : 650 mm x 2450 mm Motor-Reductor : 3 kw Drive Drum : 10 mm rubber coated Bed Type : SNH Series Felt Cast Iron Bed with Lubrication Band Tape : TS 542 Norm 4 Ply, 4/2, Aggregate Weighing Bunker Weighing capacity : 1 m3 Load cell : 4 x 1000 kg Zemic Vibrator : 2 Piece Kemp 200/3 Cement Weighing Hopper Weighing capacity : 300 kg Load cell : 3 x 500 kg Zemic Pneumatic valve : Wam Bv1fs250nn Diameter: 250 Driver : Wam Acp13 Pneumatic Actuator Vibrator : 1 Piece Kemp 100/3 Water Weighing Hopper Weighing capacity : 200 lt Load cell : 3 x 500 kg ZEMIC Pneumatic valve : Bv1fs150nn – Diameter: 150 Driver : Acp13 Pneumatic Actuator Additive Weighing Hopper Weighing capacity : 20 lt Load cell : 1 x 100 kg ZEMIC Pneumatic valve : 1 ’’ TORK Pump : 0,37 kw Weighing System : 1 pcs chemical weighing system Piston Air Compressor It has a stop-start working system, driven by belt-pulley. It has a 3 phase electric motor. Flow : 200 lt/mn. Operating : 6-8 Bar MIXER TECHNICAL SPECIFICATION Feature Value/Unit Capacity Loading...

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT Dsdpfx Adoxzth Iodola - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Dodpfew U Skvox Addjla Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, Dlsdpfeg Saqvsx Addoa - polishing wheel diameter 350 - 600 mm - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: excellent (used), Vollrath EWFX 60 dissolver Power 44 kW Speed range 200-1200 1/min Double toothed pulley with wall scraper Dledpfxorqfqto Addja Switch cabinet with frequency converter 2 x stainless steel mixing tanks, 1,350 liters each Very good condition, straight from production!!!

Condition: used, mileage: 27,293 km, power: 191 kW (259.69 HP), first registration: 01/1998, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, total width: 2,500 mm, total height: 3,500 mm, Equipment: ABS, compressor, MAN LE 18.264 Silent with telescopic articulated mast aerial appliance / aerial work platform Ziegler Bronto Skylift F32 MDT 2000 - immediately operational condition with valid 10-year inspection until 2027 ---- Equipment basic vehicle: * Suspension type leaf/leaf * Wheelbase 4325 mm * Permissible total weight 18 t * Gearbox EATON * Fuel tank 170l right * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length cab * Driver's comfort seat with lumbar support - make GRAMMER * Passenger seat make GRAMMER * Exhaust tailpipe for fire department * Engine brake * Anti-lock braking system (ABS) * Traction control system * Disc brakes for front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right + wide window in the center * Heated rearview mirrors * Wide-angle mirror right * Kerb mirror right * Rotating blue lights Djdpfxotqzbgo Addsla Equipment telescopic articulated mast aerial appliance / aerial work platform: * Body: Ziegler Bronto Skylift F32 MDT 2000 with rescue basket (max. working height 32m) Max. outreach angle: 75 degrees, basket load: 270 kg, nominal rescue height: 25m, nominal outreach: 12m, outrigger: horizontal-vertical * Maximum horizontal reach 17m * Operation possible in underfloor area * Suspension device for pulley under basket * Crane eye on main boom with 2000KG payload * Horizontal-vertical outrigger * Maximum total outrigger width 6.10 m * Access ladder * Fixed extinguishing water pipe * Power supply in the basket 400 V / 230 V * Surrounding area lighting * Firefighting water inlet 2x B Storz * Rotatable basket 45 degrees left/right * Foldable rescue platform on the basket with handrail 1.7m x 0.5m * Water monitor at the basket control station with 2300 liters per minute * Stretcher holder * 3 entrances in the basket * 4 equipment compartments in the platform * 10-year inspection performed 07/2017, valid until 07/2027 * Complete service booklet available, all maintenance carried out annually ----Immediately operational non-smoking vehicle in well-maintained condition! Complete documentation and service history available Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: also Whatsapp Email: Subject to changes, prior sale, and errors!

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Dlsdpfox D A H Esx Addja Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: good (used), Code: 0243 Brand: FBR - ITALY Model: L 85/2000 - CE Standard Automatic belt sanding machine with double goose neck for wood, carpentry, paints, metals, aluminum, composite materials, and various other materials - CE Standard Dedjxy Sl Nspfx Addola Technical data Table length 1950 mm Table width 700 mm Vertical stroke 750 mm Transversal stroke 700 mm Max belt length 5600 mm Max belt width 150 mm Three-phase belt motor 3 Hp Table lifting motor 0,5 Hp Pulley diameter 200 mm Guide on table Suction inlet diameter 150 mm Overall dimensions mm 2900 x 1000 x 1500 h Weight kg 320

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: Dlodpfx Adsupiycjdja - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: used, Field of application: Mining Power: 11 kW (15 HP) Manufacturer: Forplex Model: FL2 Year: +/- 1985 Type: Hammer mill / Fine impact mill Materials: stainless steel Motor power: 11 kW (1500 rpm) Rotor: hammer plate Hopper Bag filter Maximum filtration air flow: 1200 m3/h Minimum filtration surface area required: 8m2 Dledpjx Akd Nofx Addsa Refurbished by our teams: - Seals: new - Mill bearings: new - Motor and mill pulley: new - safety device: key + lock + electrical box case: new (Allen Bradley Guardmaster) Static load: 240 kg Dynamic load: 720 kg

Condition: excellent (used), Dissolver Drais RN-PI Dsdpfxoh U R S Aj Addela EX protected version Power 6.8 kW/ 0.75 kW Speed range 0-4000 1/min Toothed pulley 20cm Very good condition, directly from production!!!

Condition: used, mileage: 27,293 km, power: 191 kW (259.69 HP), first registration: 01/1998, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, total width: 2,500 mm, total height: 3,500 mm, Equipment: ABS, compressor, MAN LE 18.264 Silent with telescopic articulated mast aerial appliance / aerial work platform Ziegler Bronto Skylift F32 MDT 2000 - immediately operational condition with valid 10-year inspection until 2027 ---- Equipment basic vehicle: * Suspension type leaf/leaf * Wheelbase 4325 mm * Permissible total weight 18 t * Gearbox EATON * Fuel tank 170l right * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length cab * Driver's comfort seat with lumbar support - make GRAMMER * Passenger seat make GRAMMER * Exhaust tailpipe for fire department * Engine brake * Anti-lock braking system (ABS) * Traction control system * Disc brakes for front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right + wide window in the center * Heated rearview mirrors * Wide-angle mirror right * Kerb mirror right * Rotating blue lights Equipment telescopic articulated mast aerial appliance / aerial work platform: * Body: Ziegler Bronto Skylift F32 MDT 2000 with rescue basket (max. working height 32m) Max. outreach angle: 75 degrees, basket load: 270 kg, nominal rescue height: 25m, nominal outreach: 12m, outrigger: horizontal-vertical * Maximum horizontal reach 17m * Operation possible in underfloor area * Suspension device for pulley under basket * Crane eye on main boom with 2000KG payload * Horizontal-vertical outrigger * Maximum total outrigger width 6.10 m * Access ladder * Fixed extinguishing water pipe * Power supply in the basket 400 V / 230 V * Surrounding area lighting * Firefighting water inlet 2x B Storz * Rotatable basket 45 degrees left/right * Foldable rescue platform on the basket with handrail 1.7m x 0.5m * Water monitor at the basket control station with 2300 liters per minute * Stretcher holder Dljdpfx Adotqz E Dedoa * 3 entrances in the basket * 4 equipment compartments in the platform * 10-year inspection performed 07/2017, valid until 07/2027 * Complete service booklet available, all maintenance carried out annually ----Immediately operational non-smoking vehicle in well-maintained condition! Complete documentation and service history available Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: also Whatsapp Email: Subject to changes, prior sale, and errors!

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Dlodpfjx A R Egox Addoa 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm throat 300 mm bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U Dljdevlah Hopfx Addja total power requirement 1,47 / 1,84 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m².

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, overall weight: 12,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. The V8 diesel engine and 5-speed transmission run smoothly, the car is easy to drive. Dedsx A N Sfopfx Addola Top speed according to the documents = 93 km/h Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 3,25,000 km, Year of construction: 2010, Field of application: Freight transport Serial number: WDB9066571S48xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21039 Specifications: Dsdpfx Adsw H Ifujdola 2010 model EU approved until 23.11.2025 Approx. 325,000 km Wheelbase: 432.5 cm 4x2 drive 190 hp Diesel New belts New idler pulley Rear brake pads recently replaced Front shocks and brake pads replaced last year Good summer tires Winter tires included Rearview camera Webasto heater TV DVD / DAB / Radio Microphone Quality sound system Delivery by agreement Description:2010 Mercedes Sprinter 519 minibus with 16+1 seats and two sets of tires. Rear brake pads are new, and the front shocks and pads were replaced during the EU inspection last year. Some rust present on the doors and above the wheel arches. Available for delivery by agreement. Km: 325000 HK: 190 Technical approved: Yes EU-approved until: 24.11.2026 Own weight: 3730 Total Weight: 5000 Payload: 1195 Width: 199,3 Length: 734,5 Euro: 5 Model: Sprinter 519

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 3- Model : VSI 800 -CR Dledpfx Adox Av U Tjdea Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW Dlsdpfx Aovtthijddsa weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. Dljdpfxsx A N R Us Addja The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.