Used Pump Station for sale (13,349)

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Kjdpfxsxx Avpj Anisnc Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, This listing is for a Scilog Tandem 1081 Peristaltic Pump. Kodpoxx Avvefx Anijnc The unit is in full working condition and is ready for intimidate realese.

Condition: used, This listing is for a Thermo scientific Shandon HyperClean 1 Grossing Station Knedpoxzh Ezsfx Anioc

Condition: used, REPEATED ITEM Garner Denver maybe Elmo Rietschle V-VTA 80 vacuum pump V-VTA pumps developed by Elmo Rietschle for continuous operation for printing and paper handling machines. V-VTA pumps come with bearings on both sides of the rotor. Flange mounted motor with bolt coupling. V-VTA offers high efficiency, silent operation, easy to operate and service. Sound cover allows a ducted cooling air outlet either from one side only or from both front and back. Also infomration on this site SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR017 Knjdpfx Asxziatonijc Listing name: GARNER DENVER VTA 80 C 100 Vacuum Pump

Condition: used, Condition: Used - Compatible Machine: EDGE BANDING MACHINE EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Knodpfx Aovazxcjniec

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 4 pumps available -Price: per piece -Dimensions: 87/84/H100 mm -Weight: 1.9 kg Knjdpfx Aovwi Nqjnioc

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Ksdpevw Sqdjfx Anionc Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Knedpfx Anoxf Uzkoioc Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: used, Hydraulic station Manufacturer: ASEA Knjdpfx Aswmqc Nsnijc Made in: Sweden

Condition: excellent (used), mileage: 7,86,169 km, power: 147 kW (199.86 HP), first registration: 07/1992, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, total length: 8,200 mm, Year of construction: 1992, = Additional options and accessories = - PTO = Remarks = WDB67703315752728 = More information = Empty weight: 11.680 kg Carrying capacity: 1.320 kg Knjdpfxjymrxwj Anioc GVW: 13.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 1ACO417 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2024, tank capacity / l Knodeyn R Sxjpfx Anioc working pressure / bar feed pressure / bar weight / kg required space 1,72 x 1,00 x 1,81 m HYDAC hydraulic unit CA2R05H07.4-155-03-20X+3055404+G24-XXX Condition: As new

Condition: used, functionality: unexamined, Ferwood Code: RU0002544 - Manufacturer Code: VTLF 2.250/0-79.1 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment services. Please contact us. 235KG 120X80X70 Knjdpfjyrphtjx Anioc

Condition: new, The Lutz Type ME II 5-230 is a professional, industrial-grade explosion-proof universal motor designed for drum and container pumps. Manufactured by Lutz Pumpen, it is specifically engineered for safely transferring highly flammable, combustible, and hazardous low-viscosity liquids such as solvents, fuels, and alcohols. Specifications Voltage: 220–230 V AC / 50 Hz (Single-phase power) Power Output: 540–580 W (approx. 0.78 HP) Current: 3.0 A Enclosure Protection: IP54 (Dust and splash-water protected) Explosion Protection Rating: ATEX certified (II 2 G Ex de IIC T6) Weight: Approximately 6.6 kg (14.5 lbs) Key Features & Safety Mechanisms Double-Shell Housing: Built from robust, chemical-resistant materials to protect internal components from corrosive vapors and heavy handling. Knedsz Erynepfx Anisc Low-Voltage Release (LVR): An essential safety feature that prevents the motor from automatically restarting after a power outage, protecting operators from unexpected spills or splashes. Quick-Action Coupling: Allows for rapid, tool-free connection to various Lutz pump tubes (immersion tubes) made of polypropylene, PVDF, stainless steel, or aluminum. Brand new never used. Please check out our other listings as well.

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, Kärcher HDS Super M Eco Hot Water Pressure Washer New Pump Head The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temp. [°C]: 90/155 Connected load [kW]: 6.4 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW pump head NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines. Knjdpfjz D D Axox Anioc

Condition: used, Year of construction: 1996, functionality: unexamined, Used hydraulic unit from a Windsor injection molding machine, consisting of: - Electric motor Schorch KA7315M-BB03F-Z, manufactured in 1996, with 132 kW - Hydraulic pump Sauer, type 88P 226-197 LF - Reservoir tank with oil cooler, filters, and hydraulic block - Corresponding Lenze inverter in a suitable control cabinet Please refer to the attached images for further details. Ksdpfxoz D S Ene Anionc Collection in 42781 Haan, loading with a crane is possible.

Condition: new, Elmo Rietschle C-VLR 301 (40) Vacuum Pump – 290 m³/h – 150 mbar – 5.5 kW Industrial dry-running claw vacuum pump supplied with a WEG electric motor. Surplus unit, stored in its original wooden transport crate. Specifications: - Manufacturer: Elmo Rietschle - Type: C-VLR 301 (40) - ID: 10285940HI Knedpez E R T Tefx Aniec - Pumping capacity: 290.0 m³/h - Ultimate vacuum: 150 mbar (abs.) - Motor power: 5.50 kW - Speed: 2930 rpm - Duty cycle: S1 – 100% - Standard: EN 60034 - Electric motor: WEG - Motor type: W21 - Motor efficiency: IE3 - Frequency: 50 Hz - Motor speed: approx. 2940 rpm - Made in Germany - Supplied in original wooden transport crate Condition: Surplus stock. The unit appears unused and is supplied as shown in the pictures. Operational condition has not been independently tested or verified by us. Important: This item is surplus industrial equipment and is sold as-is and as shown in the pictures. No warranty or guarantee is provided. No claims regarding functionality, performance, or suitability for a specific application can be accepted. The buyer is responsible for inspecting and verifying the equipment before use. Location: Rotterdam, The Netherlands Worldwide shipping can be arranged upon request.

Condition: used, Leybold Trivac D4B vacuum pump with a single-phase motor, 230V, 50Hz. Kjdpfxoz Hcwtj Anijnc

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. Knedjz Ahmbepfx Anijc The Package Includes: 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.

Condition: good (used), 3x pallet transfer station, safety gate, pallet transfer area – used: Price per unit: €650.00 (net) ex-works, disassembled, packed, and loaded! Manufacturer: unknown Type: unknown Knodpjzv Iqajfx Anijc Year of manufacture: unknown, likely 2013 Clear internal width: approx. 2.45 m Condition: good to very good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, 1 unit – Model LPHY 60520, with 37 kW electric motor Knodpfx Ajzr H R Rsniec 1 unit – Model Z8220 KK

Condition: as good as new (ex-display), Type: PVXS-180-M-R-ES-0000-000 Part number: 8005062705C010 Design: open-circuit variable-displacement axial piston pump Control: electric displacement control Rotation: clockwise Displacement: maximum 180 cm³/rev Speed: maximum 1,800 rpm Knodpszvd S Tefx Anijc Rated pressure: 350 bar Maximum pressure: 420 bar Theoretical flow: maximum approximately 324 l/min Control motor: Georgii Kobold KOD 346-1A MB/S64 Control motor: 0.09 kW, 230/400 V, 1,400 rpm Brake: MB3, 2 Nm, 230 V, 15 W Gearbox: SPN Schwaben Präzision GF71 Condition: unused surplus unit, stored in a wooden transport crate

Condition: used, mileage: 25,000 km, power: 309 kW (420.12 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, Equipment: ABS, electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - EPS without coupling - High Beams - Hub Reduction - Immobilizer - PTO - Radio - Radio CD player - Speed limiter - Sper - Toolbox = Remarks = Mercedes Arocs 3242, 2015, 25000 km, Euro 6, 8x4, Fully leaf sprung, AMV 7450D concrete sprayer surface-mounted, Own engine, Compressor = More information = Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Reduction: hub reduction Knjdpfx Anezz Svwoiec Rear axle 2: Double wheels; Reduction: hub reduction GVW: 32.000 kg Make of bodywork: AMV 7450D = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), mileage: 2,56,629 km, power: 184 kW (250.17 HP), first registration: 07/2018, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 6,520 mm, total width: 2,550 mm, total height: 2,830 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = Knedpfoz Hbi Uox Anisc - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 6595 kg, Gross vehicle weight: 15000 kg, Total tank capacity: 100 liters, Fifth wheel coupling: Fixed, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 184 kW (247 Hp), Engine displacement: 6871 cc, Fuel: Diesel, Euro: 6, Transmission type: Manual, Transmission type: ZF, Gears: 8, Clutch pedal, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, HAGE+KNAPP 2018 // 9000 LTR // MANUAL // AIRCO // FUEL = Further Information = Transmission Transmission: ZF, 8 gears, Manual gearbox Axle Configuration Tire size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 8 mm; Tire tread depth right: 12 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 8 mm; Suspension: Air suspension Weights Unladen weight: 6,595 kg Payload: 8,405 kg GVW: 15,000 kg Functional Pump: Yes Maintenance APK (Periodic Motor Vehicle Inspection): valid until 06.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Kedez Nyd Depfx Anienc Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, This listing is for a Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Kodpfx Aoxhdx Denisnc Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance