Used Punching Clip for sale (1,893)

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Dlodpfxewag Rij Addsa Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, Pneumatic punching unit TÜNKERS, pneumatic power cylinder Pneumatic punching bracket, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No.: 141-1040F Punching frame No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Djdsxf Uqxopfx Addola Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper made of Vulkollan polyurethane elastomer Dimensions L x W x H: 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: used, Year of construction: 1993, functionality: fully functional, Speed: up to 8,000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Die-cutting force: up to 2.5 MN (250 t) Operating hours: approx. 38,000 hours Dodox Anvpspfx Addola Equipment / further details: Stripping system (stripping station) with centering frame Tools

Condition: used, functionality: fully functional, For sale is a MABI 8Z dished end punch which we used as a multi-hole punch. Dodpfex Dbunsx Addsla

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Stroke: 50 mm, Clutch: pneumatic, Power supply: 380 V, Machine weight: 2,200 kg, additional ejector, factory version with reinforced design Dlodpfxsxx T Hfo Addea

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm Djdpfx Adsmxpt Ssdjla -Weight: 30 kg

Year of construction: 2023, condition: ready for operation (used), A combined Pressta Eisele system for cutting, shearing, and punching aluminum profiles is available. Throughput capacity: approx. 380000 pieces/month, cycle time: approx. 10s, number of pieces per cycle: 4 parts, cut length: 65mm, tolerance: +/-0.3mm, roller conveyor length: 2000mm, roller conveyor width: 290mm, roller spacing: 250mm, load capacity: 200kg/m, control system: Siemens S7. 1) Saw unit, saw blade diameter: 500mm/550mm, max. cutting height: 95mm, max. cut length: 2300mm, feed length: 800mm. 2) Punching unit, feed length: 740mm, width: 290mm, max. punch stroke: 20mm, punching force: 300kN, double-stroke cycle time: 2s. Documentation available. An on-site inspection is possible. Dodpfex Db U Iox Addela

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Dlsdpfxsx Dtp Rj Addea Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Dledovfxwtepfx Addea Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Year of construction: 2019, condition: good (used), Flat pile feeder FFU-4055 Separation unit SPC-4055 without compressor Dlsdpfxox Draus Addsa

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 24550616, overall weight: 7,000 kg, total height: 1,900 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 1,200 mm, table length: 2,450 mm, AMADA ARIES 245 CNC Punching Machine Dodpfoxw Tt Nsx Addsla - Punching force: 200 kN - Power connection: 11 kVA - Includes accessories such as various punches and punching tools Attention: The item must be collected definitively between 19 and 23 January 2026 on a specific date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: M-1581, The Mühlbauer CP 2005 is an industrial punching machine designed for processing card blanks (e.g. smart cards, plastic cards) as part of card production and finishing operations. It combines precision, reliability, and efficiency – qualities that make it ideally suited for production environments with high demands. Key features: High-precision card punching The machine feeds card blanks through a punch-and-die tool, punching the cards to exact dimensions. This ensures clean, uniform end products. Hydraulic drive system A hydraulic system controls the position and speed of the punch – providing consistent precision and extended tool life. Modular & customizable tool design Tools can be custom-made or adapted to different card formats or special requirements, keeping the machine highly versatile. Robust construction & continuous operation capability The CP series from Mühlbauer is renowned for high throughput and continuous operation – ideal for industrial card printing and punching installations. Efficient material handling Card material feeding and punching are designed so that cards can be processed further or stacked directly after punching – for example, for lamination, personalization, or packaging. Typical applications: - Manufacturing of smart cards, chip cards, or plastic cards Dlodpfex Aiapex Addoa - High-volume production in the card industry - Production of cards for ID badges, access cards, identification cards, etc. - Industrial operations demanding precision, repeatability, and stable processes

Condition: good (used), Currently available from stock: approx. 1,650 pcs. Technical data on the shelf support: Manufacturer: META Type: META FIX + META CLIP The scope of delivery includes: 12x shelf supports, used Version: f. Shelves Material color: completely galvanized Total height: approx. 53 mm Total width: approx. 18 mm Material thickness: approx. 1.2 mm Weight per unit approx. 0.012 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Dsdpforl Ifxjx Addola

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Dodpfoxwp Nysx Addola Subject to prior sale!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11/7, Motorized apron press brake, model RAS UpDownBend 78.30, designed for bending thin sheet metal. Unlike traditional press brakes, the apron moves up and down, allowing bending without flipping the workpiece. Ideal for large, heavy parts or those requiring numerous handling operations. Brand & Model: RAS UpDownBend 78.30 Year of Manufacture: 2009 Technical Specifications: • Positive and negative bending • Bending length: 3200 mm • Bending capacity: 4 mm mild steel • Minimum permissible bending radius: 1.5 x sheet thickness • Maximum opening height Upper bed frame: 600mm • Maximum bending angle: 135° • Minimum bend length: 6 x sheet thickness • Backgauge depth: 95-1500mm Dlodpfjw A It Rox Addea • CNC control: CNC Controller 6000-4 • Power consumption: 15kW • Weight: 11T

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame Djdpfx Adexf Uqrodela - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2510047, total height: 2,200 mm, total length: 8,000 mm, total width: 7,000 mm, table width: 1,300 mm, table length: 6,000 mm, controller manufacturer: FANUC, controller model: SERIES 18-P, AMADA VIPROS 2510 CNC Punching Machine - Punching force: max. 196 kN - Equipped with a total of 31 turret stations - Includes a large lot of various accessories, such as punches and punching tools Note: The item must be collected on a binding date between 19 and 23 January 2026, to be mutually agreed upon. Dsdpfxoxw Trfo Addola FCA D-76571 Gaggenau – loaded onto truck

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Dlodoxvv Tvspfx Addsa Height:2342 mm Weight:21500 kg

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, table length: 2,000 mm, table width: 1,000 mm, input voltage: 410 V, overall weight: 7,500 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, Amada Aries 245 in good working condition, supplied with tools (9 tools with various clearances for different sheet thicknesses). Dlsdjxyzu Hopfx Addea

Condition: used, Masterwood mortising machine Dedpfx Adjx Dnmdsdsla

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Dlsdpfjxmfc Usx Addea Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 1,00,000 kg, year of last overhaul: 2025, ATTENTION: The machine will be completely overhauled mechanically and electrically before delivery in 2025/2026. Dlodpfx Ajw H Ag Teddsa Press force: 4000 kN Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Strokes per minute: 15 - 60 Die installation height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New SIEMENS S7 1500 series control system

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 178400 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg SPECIAL CAMPAIGN UNTIL 23.12.2025 Control unit, Siemens Sinumerik 840 D SL Dljdpjwirpcjfx Addoa CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine suffered transport damage and will be completely overhauled mechanically and electrically before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Djdpfew H Arvsx Addela Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm (Press will be delivered with a brand new table plate, T-slot design of your choice) Ram dimensions: 1500 x 1000 mm Control: SIEMENS S7 1500 series, Year of manufacture: 2020

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 150 311, total height: 6,195 mm, ram adjustment: 150 mm, installation height: 600 mm, table height: 1,000 mm, total width: 2,660 mm, total length: 4,340 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 315 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,010 mm, distance between side stands: 810 mm, distance between stands: 3,020 mm, overall weight: 76,000 kg, year of last overhaul: 2025, ATTENTION: Machine will be completely mechanically and electrically overhauled before delivery in 2025. Dsdpfx Adewqpghsdola Pressing force: 3150 kN Adjustable stroke: 40 - 200 mm Ram adjustment: 150 mm Strokes per minute: 20 - 100 Tool installation height: 600 mm Table dimensions: 3000 x 1250 mm Ram dimensions: 3000 x 1100 mm New control system SIEMENS S7 1500