Used Sprouts Punch for sale (1,649)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine Tjdezxqz Topfx Airsd

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Todpfx Aij Afapkjrjd

Condition: repair required (used), Year of construction: 1969, functionality: limited functionality, machine/vehicle number: 2649, cutting length (max.): 4,200 mm, Equipment: safety light barrier, The machine is largely functional, but the optional “AFTER-CUT” function is impaired. Tsdpfx Aie Agw Hzorod Service and functional adjustments are required. Includes some replacement blades.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Todpfx Aij Af Uvyorod Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Tsdpfs Adzqaex Airsd Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Tjdpj Ahg T Hsfx Airsd Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Tsdpfx Ae Adziceirod TECHNICAL DETAILS General Data Manufacturer: Haulick + Roos Type: RVD 63-800 HS/CNC Year of manufacture: 1980 Machine number: 1,202,097 Machine type: Punching press Press Data Press force: 630 kN Speed range: 30–800 rpm Drive power: 26 kW Stroke: 4–60 mm Stroke adjustment: 80 mm Die hole: 52 mm Table Table dimensions: approx. 800 × 600 mm Table slots: 4 MACHINE DETAILS Dimensions and Weight Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Weight: 6,000 kg EQUIPMENT Integrated guiding system by Haulick + Roos

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP32 Year of Manufacture: 1980 Machine Type: Punching Machine Press Data Press Force: 32 t Stroke: 8–70 mm Flywheel Diameter: 660 mm Speed: 80–400 RPM MACHINE DETAILS Tjdpe Adu S Rsfx Airod Dimensions Length: 1,500 mm Width: 1,200 mm Height: 2,500 mm Weight Machine Weight: 3,000 kg

Condition: good (used), Ram Punch Busch model A Label die cutter Professional machine, German-made. In very good condition. Tedpfxsz S Uvme Airsd Busch is a market leader in the production of pallet turners and punching machines. 100% functional, ready for production. Technical specifications: Opening: 300 mm Max. format: 180 x 180 mm Cycle rate: 15/min Stroke length: 200 mm Capacity: 900,000 sheets/h Weight: 600 kg Equipped with a high-speed hydraulic power unit. Features clamps for mounting dies, with axial die adjustment. Feed table adjustable in all planes. Two operating modes: semi-automatic and manual. Includes a delivery tray (stacking tray).

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm Tsdpfx Aie Adzp Nered MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD32-540 Year of manufacture: 1983 Machine number: 282047 Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 25 t Stroke: 8–60 mm Stroke rate: 100–500 1/min Flywheel diameter: 125 mm Table dimensions: 470 × 450 mm Tsdpfxo Ad Ilwj Airjd Table slots: 4 MACHINE DETAILS Manufacturer: Schaal Type: SEP25 Machine number: 703 Year of manufacture: 1983 Drive power: 2.9 kW Dimensions (L × W × H): 1,500 × 1,200 × 2,000 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, punching force: 30 t, sheet thickness (max.): 6 mm, overall weight: 6,400 kg, CNC Turret Punching Machine EUROMAC 1250/30 CX TECHNICAL SPECIFICATIONS: • Year of manufacture: 2000 • Punching force: 30 t • Max. sheet length: 1 250 mm • Max. sheet width: 2 000 mm • Max. material thickness: 6 mm • Max. sheet length (with repositioning): 2 500 mm • Max. sheet width (with repositioning): 4 000 mm • Max. punching strokes per minute: 320 • Machine dimensions: approx. 3,2 × 4,0 × 1,8 m • Machine weight: 6 400 kg Tsdpfxo Agn R Hj Aired EQUIPMENT: - Punching tools (shown in the photos) The machine is in very good technical condition, connected to power and available for inspection and testing on site by prior appointment. Professional loading is included in the price. Accessories, tools and clamping devices shown in the photos are included in the offer only if explicitly listed under equipment. Technical specifications are provided for reference only and may contain inaccuracies. The machine is subject to prior sale.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP25 Year of manufacture: 1983 Machine number: 703 Machine type: Punching machine Press Data Press force: 25 t Stroke: 8–60 mm Stroke rate: 100–500 min⁻¹ Flywheel diameter: 125 (?) Work table Tjde Ad Iiijpfx Airsd Table dimensions: 470 × 450 mm Table slots: 4 MACHINE DETAILS Drive power: 4 HP Dimensions (L × W × H): 1,500 × 1,200 × 2,000 mm Weight: 3,000 kg

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 1,000 h, machine/vehicle number: 8044, overall weight: 2,070 kg, Equipment: CE marking, documentation/manual, Shearing machine Shearing capacity for flat steel: 450x15 mm; 300x20 mm Shearing capacity for angle iron: 130x130x13 mm (90 degrees); 70x70x7 mm (45 degrees) Shearing capacity for round and square bar: 45 mm Punching machine: 800 kN Maximum capacity: ø40x14 mm Tedpfj Afnqpox Airod Power: 9 kW

Condition: good (used), Year of construction: 2006, operating hours: 47,962 h, functionality: fully functional, type of input current: three-phase, overall weight: 18,000 kg, input current: 40 A, input frequency: 55 Hz, input voltage: 380 V, Equipment: safety light barrier, We are selling: a well-maintained Amada punching and nibbling machine, used only for thin sheet metal applications. Maintenance was performed by AMADA. Without tooling. The machine is being sold due to a new investment. The buyer must dismantle and collect the machine in DE-84051 Mettenbach. The machine can be inspected in operational condition in DE-84051 Mettenbach by appointment. Tjdpfx Aisz R Atqored Sale only to commercial customers and with the exclusion of any warranty!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Tedpfxo Ahhi Uj Airsd Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit Tjdpsz S T Injfx Airjd The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Tsdpfeykt N Sox Airod Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, TRUMPF TruPunch 5000 S10 with Siemens SINUMERIK 840D control delivers 220 kN punching force across a 2.500 x 1.250 mm work area for sheet up to 8 mm thick, backed by a 21-station tool magazine and multi-tool holder for several punches in one station. Up to 1.400 strokes/min, thread forming function, active die with programmable lift, and a complete set of punching tools with trolley included. CNC CONTROL Controller: Siemens SINUMERIK 840D PUNCHING Punching force kN: 220 Max. sheet thickness mm: 8 Hold-down force kN (max. / progr.): 20 / 4,5–20 Max. workpiece weight kg: 200 Stroke rate 1/min (punching / marking): 1.400 / 2.800 C-axis speed (tool rotation) rpm: 330 Active die force kN: 220 Power consumption (base machine) kW: 12,2 TOOL MAGAZINE / CLAMPS Tool stations (turret / linear magazine): 21 Sheet clamps (standard / max.): 3 / 4 Tool change time s (standard / multi tool): < 3 / 0,7 AXES / WORK AREA Work area X x Y mm (without repositioning): 2.500 x 1.250 Rapid traverse X / Y m/min: 100 / 60 Simultaneous rapid traverse (X+Y) m/min: 116 Acceleration X / Y m/s2: 20 / 10 MACHINE RUNNING TIMES Under power hours: 21.316 EQUIPMENT & OPTIONS Multi-tool holder (several punches in one station) Thread forming (tapping) function Active die (programmable die lift) Sheet lubrication from below Sensor zero stop Parts flap for parts up to 500 x 500 mm Siemens SINUMERIK 840D control with TRUMPF user interface TRUMPF SheetMaster automatic loading and unloading unit (2012) Todpfx Ais Afz Tqjred Sheet fanning package with sheet separation nozzle on the SheetMaster GripMaster unloading unit for skeletons and large parts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, EDEL - Stanzprofi 250 / Punching machine -CE marking -Year of manufacture 1994 -Depth stop approx. 250 mm -Length stop approx. 500 mm -Working area 1000x500 mm -Tool area up to max. 100 mm -Material thickness up to approx. 10 mm -Punching example - diameter 70 mm in 3 mm sheet metal Todpfxjz Dq S Tj Airod -Punching example - diameter 25 mm in 8 mm sheet metal -Punching sequence / time interval 1 second -Drive power 1.5 kW -Table dimensions approx. 1350x700 mm -Operating pressure 6 bar -F-Max. 250 KN / (25 MP) -Various punching dies -Machine feet -Documentation Dimensions approx. 1.6x2x1.8 meters / Weight approx. 1400 kg Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Tode Aduyzopfx Aired Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,204 h, functionality: fully functional, machine/vehicle number: MR610745176, punching force: 30 t, type of input current: three-phase, punching diameter: 88 mm, input frequency: 50 Hz, compressed air connection: 6 bar, input voltage: 400 V, Equipment: safety light barrier, Euromac MTX FLEX 12 P 1250/30 X2250 (Year of Construction 2016) – Only 2,204 punching hours! Includes a large tool package & special tools. For sale is a very well-maintained, fully functional CNC punching machine, the Euromac MTX FLEX 12, manufactured in 2016. The machine is in excellent condition and has a very low net punching time of only approximately 2,204 hours (total operating time approximately 9,055 hours, see display photo). A particular highlight is the extensive tool and accessory package, which, in addition to standard and multi-tool tools, also enables valuable special applications such as engraving, countersinking, and deburring from below. 📌 Technical data & machine highlights: Manufacturer: Euromac (Italy) Model: MTX FLEX 12 P 1250/30 X2250 Year of Construction: 2016 Punching force: 300 kN (30 tons) Working area: 1250 x 2250 mm (can be extended as required) Net punching time: only ~2,204 hours (total number of strokes: approx. 6.19 million) Tsdpfxj Aaz Tye Airsd Table: Gentle brush table for scratch-resistant sheet metal processing Control: Top Punch Touch (TPT) on a robust Panasonic Toughbook control unit 🛠️ Special equipment & special features: Integrated engraver: For direct labeling/marking of components during the punching process. Countersinking tool from above: Specially equipped for 4.0 mm SPAX countersinking. Deburring from below: Ideal for precise marking/deburring from the underside. Multi-tool capability: Full support for multi-tool cassettes (e.g., XMTE6 / XMTE10) for quick tool changes and high flexibility. 📦 Scope of delivery & accessories: Large punching tool assortment: Extensive package of punches, dies, blanking punches, and cassettes (including high-quality tools from Wilson Tool & Mate). Double/replacement equipment: Including installed multi-tool + identical replacement multi-tool (see picture V40) for uninterrupted workflows. Software: Lantek programming software included. Accessories: Tool holders, clamping jaws, manuals/documentation. 📋 Condition, inspection & logistics: Condition: The machine is currently still assembled, fully operational, and connected to the power supply. Test & inspection: A demonstration and trial punching on-site in 78224 Singen can be arranged. Loading: Loading on-site can be organized/supported. Transport: Transport and collection are the responsibility of the buyer. 💶 Price & invoicing: Price: 90,000 € negotiable (net plus 19% VAT) You will receive a proper invoice with VAT stated. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Length: 480 mm Width: 400 mm MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Todpfxe Adunrs Aired Condition: Refurbished Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Maximum diameter for material thickness 32 mm x 10 mm Throat 510 mm Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Todez N Al Dopfx Airod Machine weight 1.4 tons Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Tsdezxxhnspfx Aired Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.