Used Quality Assurance for sale (8,639)

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Nsdohnc E Aopfx Adwocl Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. The F200 XL is a 3-station machine and comes standard with the brush height tracking system designed by Q-Fin. In combination with the simple button system, this ensures that setting up and working with the F200 is self-explanatory, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with continuously adjustable speed on the conveyor and Njdpfx Asx U D Dpsdwscl on the brush(es) and/or grinding head(s), making all possible operations and results achievable. You determine the desired finish yourself. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, enabling even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is not without reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. It has been checked, tested and is working 100% properly. The F200 XL is a 3-station machine suitable for deburring, grinding and/or rounding small sheet metal parts. This deburring machine has a grinding unit as its first processing station, followed by two cup brushes. The grinding belt removes burrs or gives the product a nice line finish. The brushes ensure the desired rounding of the product and give the surface an even finish. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, allowing even smaller workpieces Ncodpsx U Dx Hsfx Adwol (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is with good reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. Nsdex Uz Ilopfx Adwscl On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. It has been checked, tested and is working 100% properly. Removing slag is a labour-intensive task that often still involves the use of a hammer and chisel. Alternatively, an electrically powered hand-held machine can be used for this purpose. Due to the heavy load during operation, both for the operator and the hand-held machine, these hand-held machines need to be replaced regularly. This results in high costs, additional waste and possible health problems for the operator. Manual slag removal is time-consuming and stressful for both the operator and the machines, leading to high costs and wear and tear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding. Ncjdpfxex Ux Rwe Adwol The removed residue is collected in a container and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed with touchscreen controls for ease of use. The slag is effectively removed by two counter-rotating slag removal rollers, which strike the product twice per revolution. The result is a flat product that is ready for further finishing.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. Nsdpfx Ael Dw D Eodwscl The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. Nsdpfx Ajyaw Haodwjcl ERNiCrMo-3, ERNiCrMo-4, etc.

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A comprehensive machine inspection by the manufacturer's service department was carried out on 17 December 2025. Report to follow Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical Specifications • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per metre width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity of rotary beam: 65–172 kW • Winding station: Contact winder with preset reel change • Maximum winding diameter: 1,250 mm Nedpfx Adsx Hx Rnswjcl • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional Equipment and Accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data input

Condition: used, Used stacking rack made of hot-dip galvanised steel. Suitable for stanchions 60. 3 x 3. 65. These stacking racks can be used as mobile warehouse racking and are flexible in height. Njdpfx Astrm Aljdwocl The loading floor is designed for bulky or difficult to palletise goods. You can determine the height of the stacking racks

Condition: used, L: 1250, W: 1050, H: 560 (mm). Product: Mesh Stillages. Type: Fixed construction stackable. Ncedpsmn Ii Ijfx Adwel Version: B-quality, with damage. Material: steel. Walls: mesh. Floor: steel. Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1175. Internal width (mm): 980.

Condition: used, Used gray painted steel stacking bin (1200 x 800 mm). The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin is also equipped with four raised corners with lifting eyes (not certified for lifting). This makes the bin easy to stack or lift. Ncsdpfjw Swx Tex Adwjl Notice!

Condition: excellent (used), Full salad wash + dry line, previously washing and drying 350kg of product per hour Infeed elevator (4m x 0.5m) + vibrating pan Nedpfjvzydaox Adwecl Barrel leaf washer, capacity approx 350kg per hour. The barrel is 4.5m long x 0.8m diameter De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt 2.75m x 0.6m Vibrating pan 1.5m x 0.4m Lynnmore salad dryer 5.1m x 0.9m Hitec salad dryer 5.1m x 0.9m

Year of construction: 2022, condition: like new (used), functionality: fully functional, Quality scanner for glass, 2700 mm VIPROTRON Quality Scanner 3D Nedpfx Adox Eczfjwocl Year of production: 2022 Quality scanner for glass With the Quality Scanner 3D you automate the monitoring of your glass quality at the highest level. The extremely effective quality control system with up to three different camera/illumination arrangements (brightfield, darkfield and reflection channel) is integrated directly after the washing machine in order to rule out pseudo errors. Each individual channel is focusing on specific types of defects, which are optically detected differently. The data comparison of the three channels enables a level of accuracy in defect classification that cannot be achieved with single-channel systems. Working height: 2700 mm For mounting on vertical glass processing or insulated glass production machinery Complete set-up ready for installation More technical information can be found attached as Tech. data file Excellent condition Very little used, as new As is Available immediately

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Ncedpjxqqyyefx Adwjl Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: excellent (used), MiVeg System 4080 skewering system for meat and veg kebabs. These are a far more reliable system than the normal French machines sold for this job. Cost new was EUR 160,000 Ncedpfxju Tty He Adwol

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Ncedpfsh D Ezgox Adwel

Condition: good (used), Year of construction: 2015, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. Nedpfx Astpnfbedwocl - Brand Zumbach Electronics AG - Type Simac 63 - Year of construction: 2015 - Number of cameras 3 - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Condition: good (used), Year of construction: 1999, Brand: Collin Lab & Pilot Solutions GmbH Model: E 30 M Low Boy Screw type: Single Year of manufacture: 1999 Screw diameter: 30 mm Ncjdjw Awczspfx Adwol Screw L/D ratio: 25 Dimensions (LxWxH): 2,000 x 1,200 x 1,900 mm Weight: 560 kg

Condition: ready for operation (used), Technical characteristics FL20/16/30/II/S 400V 3Ph+n 200A Njdsty Rxijpfx Adwscl Width 300mm 2x1 straightening unit 2x1 double shredder (bottom up) 3,5kW 2x1 standard milling unit 6kW 2x1 universal milling unit 4,5kW 2x1 universal milling unit 3,5kW 2x1 universal milling unit 1kW 2x1 universal milling unit 0,75kW 2x1 sanding unit 2x1 sanding unit 2x3 KURTZ hot transfer units Mechanization of infeed and outfeed Sorting and quality control Search by typeDouble Power and Motors Pluging: Three-phased Overall dimensions

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, 4 high-quality storage racks available (Year built 2023) Original purchase price for 4 racks: €2,260 Asking price: €750 excl. VAT (for all 4 racks together to one buyer) EXW delivery (Berlaar, Belgium) Ncsdpfsw H R U Sox Adwol - 5x wooden storage shelves - Maximum load 400 kg - Rubber wheels

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min Ncjdpfx Asutdrhsdwjl suction unit.

Condition: excellent (used), functionality: fully functional, The METTLER TOLEDO ASN9000 Series metal detector is a crucial Quality Assurance (QA) machine designed to ensure product safety by detecting and rejecting ferrous, non-ferrous, and stainless steel contaminants on the production line. Detection & Security High Sensitivity: The Detector Head rate is IP66, and it operates with Max. Frequencies Up to 800 kHz, ensuring high detection sensitivity across a wide range of metal contaminants. Automatic Rejection: Features a reliable Pusher (or Reject Arm) Operation Rejection system to automatically remove contaminated products from the line. Line Speed Capability: Capable of operating at a Max. Line Speed Up to 60 m/min, ensuring it keeps pace with high-speed production lines. High QA Rating: The main unit has an IP Rating of IP44, providing protection in a typical food processing environment. Operational Benefits User Interface: Equipped with a 5.7" Color Touchscreen HMI for easy setup, monitoring, and data management. Ncodexv S D Rspfx Adwol Robust Construction: The detector is built with Stainless Steel (304) - Brushed Finish Construction, offering durability and simplified cleaning in washdown environments. Connectivity: Includes Ethernet TCP/IP, Fieldbus, USB port Connectivity for network integration, data logging, and remote diagnostics. Manageable Load: Designed to handle a Max. Load of 10 kg on the conveyor.

Condition: like new (used), Ricoma 1502 Embroidery Machine Perfect working condition! • 2 heads and 15 colors • Maximum embroidery area: 560 × 360 mm Warranty & Delivery Components: the machine is delivered complete Quality assurance of the equipment is fully provided by our team of professional technicians. Nsdpoycvwpofx Adwjcl

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,905 h, load capacity: 3,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16X7X10 1/2, rear tire type: superelastic tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,250 mm, total width: 2,300 mm, color: green, motor model: V1505-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- Years of experience | In-house service & paint facility | Expert advice | Own transport fleet | Post-sale support Looking for a forklift you can rely on? Ncedpfx Adoycyppewol We are a reputable dealer of new and used forklifts with many years of experience. We supply customers across Europe – from small businesses to international industrial facilities. Our forklifts are more than just machines – they’re your assurance of smooth and reliable logistics. -- What sets us apart? -- ✅ Every forklift receives a comprehensive technical overhaul (inspection, testing, replacement of filters and oils, refurbishment of key components) ✅ Option of a full UDT inspection upon customer request ✅ In-house paint and service facilities – forklifts perfected both visually and technically ✅ Europe-wide transport – managed by our own fleet with trained drivers ✅ Operator training upon delivery + functional testing of the equipment at your site ✅ After-sales service and technical support – we’re here for you even after the sale ✅ View and test the machine at our location – you’re welcome to visit! ✅ Hundreds of satisfied customers across Europe – join those who trust us ✅ Financing assistance – we work with leading leasing companies ✅ Invoicing in EUR or PLN – according to customer preference -- OFFER: COMBILIFT C3000 – 4-way forklift ✅ Year: 2014 ✅ Operating hours: 6,905 h ✅ Power: Diesel ✅ Capacity: 3,000 kg ✅ Mast: Duplex – 4,000 mm ✅ Wide fork positioner 2,700 mm | Forks 1,100 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – after major service ✅ Visual condition: Well-maintained, no rust, ready for operation Dimensions: Height: 2,350 mm Total length: 2,250 mm Width: 2,300 mm Positioner width: 2,700 mm Overall height: 2,600 mm -- Ideal for: -- 📦 Warehouses with narrow aisles 🌲 Timber, steel, and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor applications -- FT Logistics – Quality you can rely on. Service you can trust. --

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 3,603 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,550 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,150 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16X7-10, rear tire type: superelastic tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,250 mm, color: green, motor model: V1505-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of experience | 🛠️ In-house service & paint shop | 🤝 Professional consultation | 🚛 Own transport fleet | 📞 After-sales support Nodpfxoycyn Se Adwjcl Looking for a reliable forklift? We are a dependable dealer of new and used forklifts with a longstanding reputation. We serve customers across Europe – from small enterprises to major industrial facilities. Our forklifts offer more than just machinery; they are your assurance of smooth and dependable logistics operations. What sets us apart? ✅ Every forklift undergoes comprehensive technical servicing (inspection, testing, filter and oil replacement, refurbishment of key components) ✅ UDT full certification available on request ✅ In-house paint shop & service workshop – machines perfected both technically and visually ✅ Europe-wide transport with our own trained drivers ✅ Operator training upon delivery + operational demonstration at your location ✅ Technical and service support after purchase – we’re here for you even after the sale ✅ Machine viewing and testing available at our site – you’re welcome to visit! ✅ Hundreds of satisfied customers throughout Europe – join our trusted partners ✅ Financing support – cooperation with leading leasing companies ✅ Invoice in EUR or PLN – as preferred by the client AVAILABLE NOW: COMBILIFT C3000 – 4-way forklift ✅ Year manufactured: 2013 ✅ Operating hours: 3,603 hrs ✅ Drive: Diesel ✅ Capacity: 3,000 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1,200 mm | Forks 1,150 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – after major service ✅ Visual condition: Very well maintained, corrosion-free, fully work-ready ✅ Free lift: 1,550 mm 📏 Dimensions: Height: 2,350 mm Overall length: 2,300 mm Width: 2,250 mm Positioner width: 1,200 mm Height of structure: 2,300 mm Ideal for: 🏭 Warehouses with narrow aisles 🌲 Wood, steel, and pipe industries 📦 Handling of long goods ⚙️ Operations both indoors and outdoors