Used Ra 630 for sale (16,686)

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) Cedpfx Afjyg Iiropogn - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Csdjwz Ry Djpfx Afpogn Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg Cgjdoyb Sx Tjpfx Afpsn The machine was raised by 100 mm.

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm Cgsdpewc U Inofx Afpen power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2003, functionality: fully functional, SACMI AUTO-ADHESIVE LABELLER MACHINE Manufacturer: Sacmi Model: RA 1056 TYPE: 16T S4-E4-CE Year: 2003 Nominal speed: 15,000 bph Cedjv Exkmepfx Afpsgn No. of heads: n° 16 N° groups: n° 4 self adhesive stations Rotational direction: Clockwise Positioning of the bottles controlled by servo motors Max dimensions working label: Width 200 mm Height 240mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, 4-knife cutterblock, 8 kW, infinitely variable feed, electric height adjustment with digital display, planed table, table rollers, planing height 300 mm, good condition. Transport possible at extra cost! Csdpfx Aeybqn Hsfpjgn

Condition: used, Year of construction: 2010, Machine number AB/202595, planing width approx. 630 mm, electric table height adjustment, maximum passage height 300 mm, table length 1000 mm, cutterhead with 4 Tersa knives Cgjdpfoygwc Ujx Afpjn

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Codel D Rxbopfx Afpogn Height adjustment: electric display planing thickness: mech. counter Feed speed: 5 / 8 / 12 / 18 Feed roller: steel Pressure beam: jointed Extraction roller: Rubber table rollers: no Engine power: 9 kW suction connection: 150mm Machine length: 1200mm Machine width: 1200mm Weight: 810 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Cgjdpfx Afsyc Ht Iopjn Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Condition: good (used), functionality: fully functional, conveyor belt width: 615 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 615 mm, space requirement length: 1,205 mm, space requirement width: 2,800 mm, type of input current: three-phase, Fritsch Rollfix 3W 630 Dough Sheeter For all dough types – sheeting and laminating With pressure board for long rolling Manual control Dough sheeting machine With hand and foot control Mobile design Connection: 400V 16A CEE plug Cedpfx Aoyak S Asfpogn Dimensions approx. 2800 x 1205 mm (W x D) Used machine Options: Maintenance contract Service package Spare parts box Delivery service Commissioning & training Visit our wide range of dough sheeters!

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis Cgjdpfx Asx D Rqrefpsn • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm Cjdpfxox D Nwqo Afpegn

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 Cgodpjyap Uiefx Afpjn • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Csdpfx Aswu Inlefpogn Locking speed: 70 mm/sec Power needed: 380V

Condition: used, functionality: fully functional, Hydraulic guillotine shear Brand: Ajial Model: CB-630 Cjdpfoydvamjx Afpogn Type: Swing beam shear Cutting length: 3,050 mm Maximum cutting thickness: 6 mm Cutting angle: 2º Motor power: 15 HP Back gauge: 800 mm Throat depth: 400 mm

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits Csdjyallkspfx Afpsgn • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Cgedpfsvm Dzaex Afpon Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Condition: ready for operation (used), Technical Data: Product Number RA 0160 D Year of Manufacture 2013 Motor Power 4 kW Capacity 160 m3/h Maximum Vacuum 0.3 mbar Noise Level 74 dB Rotational Speed 1500 rpm Weight 250 kg Dimensions [HxLxW] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.3 mbar, as confirmed by the measurement on the sensor shown in the video below. Cedpfsxdvp Hjx Afpjgn 3.1 -1 on the sensor display indicates a vacuum of 3.1 to the power of minus one, which equals 0.31 mbar. After complete overhaul The pump is in excellent condition. New oil New oil filter New exhaust separators New Electric Motor – ONE-YEAR WARRANTY Oil-lubricated vacuum pump, suction unit – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their working principle as: displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Final pressure (the lowest pressure that can be achieved with such a pump), Pumping speed and its dependence on pressure, Capacity (usually measured in m3 of pumped gas per unit of time).

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed Cgedpfx Aoycqrbofpjn oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Cgodpfxsyaizio Afpen

Condition: excellent (used), Year of construction: 2007, Injection molding machine Arburg 630S-2500-1300 (231) Product Code: 231 Availability: In Stock Year of production: 2007 Technical data Shot Weight: 510 g Clamping Force: 2,500 kN Screw dia: 55 mm Injection pressure: 2380 bar Tie bar distance: 630x630 mm Platen size: 900x900 mm Mould height min.: 400 mm Total day-light max: 1000-1300 mm Type of controls: Selogica Language: German Power: 68 kW Workinghours: 74.294 h Weight: 13500 kg Hopper: No Core pull: Yes Cgjdpfxovtmlhs Afpen Euromap: Yes Air valve: Yes

Condition: used, Year of construction: 2003, pressure 63 t Cgsdpfxovzxtto Afpon stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t Cgsdpfx Aevut Ixofpen dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse Cgsdpfx Afovut Ewopjn

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s Cjdpfxjv Svaro Afpogn working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements